Laboratory Evaluation of Anti-strip Additives in Hot Mix Asphalt


Book Description

The use of hydrated lime or other liquid anti stripping agents (ASA) is the most common method to improve the moisture susceptibility of asphalt mixes. However, most laboratory test conditions used to evaluate the moisture susceptibility of the mixes are only for a short duration of time. This might not be a good representation of the field conditions (i.e., several months or years of service). Thus, a study to evaluate the effects of conditioning the mixes for longer durations was initiated. Also, another problem with the use of the liquid anti stripping agents is their heat storage stability. This report addresses these two issues, by preparing and testing mixtures made with fresh binder for indirect tensile strength after conditioning the samples for 1, 7, 28, 90 and 180 days, and samples prepared from binder stored for three days at 160° C after conditioning them for 1, 28 and 90 days. The results of this study indicated that hydrated lime and the liquid anti stripping agents were equally effective for the mixes used in this research when conditioned beyond one day. In the case of samples prepared from stored binder, there was no significant difference in the effectiveness of hydrated lime and the liquid anti stripping agents even after conditioning for one day. Though it was observed that none of the ASA treatments performed better than others in the case of samples prepared with stored binder, it was also observed that almost all mixes gave significantly similar wet ITS and TSR values as samples prepared from fresh binder.







Advances in Interlaboratory Testing and Evaluation of Bituminous Materials


Book Description

This STAR on asphalt materials presents the achievements of RILEM TC 206 ATB, acquired over many years of interlaboratory tests and international knowledge exchange. It covers experimental aspects of bituminous binder fatigue testing; the background on compaction methods and imaging techniques for characterizing asphalt mixtures including validation of a new imaging software; it focuses on experimental questions and analysis tools regarding mechanical wheel tracking tests, comparing results from different labs and using finite element techniques. Furthermore, long-term rutting prediction and evaluation for an Austrian road are discussed, followed by an extensive analysis and test program on interlayer bond testing of three different test sections which were specifically constructed for this purpose. Finally, the key issue of manufacturing reclaimed hot mix asphalt in the laboratory is studied and recommendations for laboratory ageing of bituminous mixtures are given.













Laboratory Evaluation of Warm Mix Asphalt Influence on Theoretical Maximum Specific Gravity


Book Description

Warm mix asphalt (WMA) technology provides sufficient workability for asphalt mixtures at reduced mixing and compaction temperatures. Depending on the WMA technology, the typical temperature reduction range is 20 °C to 55 °C below hot mix asphalt (HMA) production temperatures. WMA involves chemical and wax additives that are added to an asphalt binder or incorporated through the use of foaming technology. The main advantages of WMA are reduced emissions and a reduction in combustible fuel consumption. Ongoing WMA research projects have documented some differences between HMA and WMA mixes, prompting numerous research projects that are investigating these concerns. The purpose of this research is to evaluate the volumetric properties by directly comparing laboratory produced WMA and HMA mixes. This study investigates the impact of WMA additives on the volumetric properties, specifically, the theoretical maximum specific gravity (Gmm). The Gmm testing followed the procedure of ASTM D2041. Two mix designs with HMA binder were produced, one without recycled asphalt pavement (RAP) and the other with 30 % RAP. After the mix designs were completed, no additional changes were made to account for the addition of the WMA technology. The mixes included the WMA technologies Sasobit and Advera, as well as an HMA control, for a total of six different laboratory produced mixes. Each mix was produced at 120 °C, 135 °C, and 150 °C, and each mix was oven cured for 1, 2, and 4 h. The test results were analyzed using statistical principles to determine whether differences in the Gmm values were statistically significant. The results show that temperature has little impact on Gmm. Gmm was not affected by curing times of 1 and 2 h, but the longer curing time of 4 h resulted in a statistically significant increase in Gmm. Further analysis revealed that the mix sensitivity to curing time depends on the amount of RAP in the mix. For the mix designs studied, the Advera Gmm values were similar to the HMA values, but the Sasobit Gmm values were statistically lower than the Advera values.







Advances in Interlaboratory Testing and Evaluation of Bituminous Materials


Book Description

This STAR on asphalt materials presents the achievements of RILEM TC 206 ATB, acquired over many years of interlaboratory tests and international knowledge exchange. It covers experimental aspects of bituminous binder fatigue testing; the background on compaction methods and imaging techniques for characterizing asphalt mixtures including validation of a new imaging software; it focuses on experimental questions and analysis tools regarding mechanical wheel tracking tests, comparing results from different labs and using finite element techniques. Furthermore, long-term rutting prediction and evaluation for an Austrian road are discussed, followed by an extensive analysis and test program on interlayer bond testing of three different test sections which were specifically constructed for this purpose. Finally, the key issue of manufacturing reclaimed hot mix asphalt in the laboratory is studied and recommendations for laboratory ageing of bituminous mixtures are given.