Low-complexity Forward Error Correction and Modulation for Optical Communication


Book Description

A novel low-complexity architecture for forward error correction (FEC) in optical communication is proposed. The architecture consists of an inner soft-decision low-density parity check (LDPC) code concatenated with an outer hard-decision staircase or zipper code. The inner code is tasked with reducing the bit error probability below the level that allows the outer code to deliver on the stringent output bit error rate required in optical communication. A hardware-friendly quasi-cyclic construction is adopted for the inner codes. The concatenated code is optimized by minimizing the estimated data-flow at the decoder. A method is developed to obtain complexity-optimized inner-code ensembles. A key feature emerging from this optimization is that it pays to leave some inner codeword bits completely uncoded, thereby greatly reducing the decoding complexity. The trade-off between performance and complexity of the designed codes is characterized by a Pareto frontier. In binary modulation, up to 71% reduction in complexity is achieved compared to previously existing designs. Higher-order modulation via multilevel coding (MLC) is compared with bit-interleaved coded modulation (BICM) from a performance-versus-complexity standpoint. In both approaches, complexity-optimized error-reducing LDPC inner codes are designed for concatenation with an outer hard-decision code, for various modulation orders. Code designs for MLC are shown to provide significant advantages relative to designs for BICM over the entire performance-complexity tradeoff space, for a range of modulation orders. Codes designed for MLC can operate with 78% less complexity, or provide up to 1.2 dB coding gain compared to designs for BICM. A multi-rate and channel-adaptive inner-code architecture is also proposed. A tool is developed to optimize low-complexity rate- and channel-configurable concatenated FEC schemes via an MLC architecture. Compared to previously existing FEC schemes, up to 63% reduction in decoding complexity, or up to 0.6 dB coding gain is obtained. Code designs for MLC in combination with four-dimensional signal constellations are also considered. The design method is generalized to obtain complexity-optimized non-binary LDPC codes to concatenate with outer zipper codes. Gains of up to 1 dB over the conventional schemes are reported. The possibility of using a novel class of nonlinear codes in FEC design is also investigated.




LDPC Coded Modulations


Book Description

This book focuses on the analysis and design of low-density parity-check (LDPC) coded modulations, which are becoming part of several current and future communication systems, such as high-throughput terrestrial and satellite wireless networks. In this book, a two-sided perspective on the design of LDPC coded systems is proposed, encompassing both code/modulation optimization (transmitter side) and detection algorithm design (receiver side). After introducing key concepts on error control coding, in particular LDPC coding, and detection techniques, the book presents several relevant applications. More precisely, by using advanced performance evaluation techniques, such as extrinsic information transfer charts, the optimization of coded modulation schemes are considered for (i) memoryless channels, (ii) dispersive and partial response channels, and (iii) concatenated systems including differential encoding. This book is designed to be used by graduate students working in the field of communication theory, with particular emphasis on LDPC coded communication schemes, and industry experts working on related fields.







Coded Modulation Systems


Book Description

Coded Modulation Systems is an introduction to the subject of coded modulation in digital communication. It is designed for classroom use and for anyone wanting to learn the ideas behind this modern kind of coding. Coded modulation is signal encoding that takes into account the nature of the channel over which it is used. Traditional error correcting codes work with bits and add redundant bits in order to correct transmission errors. In coded modulation, continuous time signals and their phases and amplitudes play the major role. The coding can be seen as a patterning of these quantities. The object is still to correct errors, but more fundamentally, it is to conserve signal energy and bandwidth at a given error performance. The book divides coded modulation into three major parts. Trellis coded modulation (TCM) schemes encode the points of QAM constellations; lattice coding and set-partition techniques play major roles here. Continuous-phase modulation (CPM) codes encode the signal phase, and create constant envelope RF signals. The partial-response signaling (PRS) field includes intersymbol interference problems, signals generated by real convolution, and signals created by lowpass filtering. In addition to these topics, the book covers coding techniques of several kinds for fading channels, spread spectrum and repeat-request systems. The history of the subject is fully traced back to the formative work of Shannon in 1949. Full explanation of the basics and complete homework problems make the book ideal for self-study or classroom use.




Low Complexity MIMO Receivers


Book Description

Multiple-input multiple-output (MIMO) systems can increase the spectral efficiency in wireless communications. However, the interference becomes the major drawback that leads to high computational complexity at both transmitter and receiver. In particular, the complexity of MIMO receivers can be prohibitively high. As an efficient mathematical tool to devise low complexity approaches that mitigate the interference in MIMO systems, lattice reduction (LR) has been widely studied and employed over the last decade. The co-authors of this book are world's leading experts on MIMO receivers, and here they share the key findings of their research over years. They detail a range of key techniques for receiver design as multiple transmitted and received signals are available. The authors first introduce the principle of signal detection and the LR in mathematical aspects. They then move on to discuss the use of LR in low complexity MIMO receiver design with respect to different aspects, including uncoded MIMO detection, MIMO iterative receivers, receivers in multiuser scenarios, and multicell MIMO systems.




Signal and Information Processing, Networking and Computers


Book Description

This book collects selected papers from the 7th Conference on Signal and Information Processing, Networking and Computers held in Rizhao, China, on September 21-23, 2020. The 7th International Conference on Signal and Information Processing, Networking and Computers (ICSINC) was held in Rizhao, China, on September 21-23, 2020.




Congress on Intelligent Systems


Book Description

This book is a collection of selected papers presented at the First Congress on Intelligent Systems (CIS 2020), held in New Delhi, India, during September 5–6, 2020. It includes novel and innovative work from experts, practitioners, scientists, and decision-makers from academia and industry. It covers topics such as Internet of Things, information security, embedded systems, real-time systems, cloud computing, big data analysis, quantum computing, automation systems, bio-inspired intelligence, cognitive systems, cyber physical systems, data analytics, data/web mining, data science, intelligence for security, intelligent decision making systems, intelligent information processing, intelligent transportation, artificial intelligence for machine vision, imaging sensors technology, image segmentation, convolutional neural network, image/video classification, soft computing for machine vision, pattern recognition, human–computer interaction, robotic devices and systems, autonomous vehicles, intelligent control systems, human motor control, game playing, evolutionary algorithms, swarm optimization, neural network, deep learning, supervised learning, unsupervised learning, fuzzy logic, rough sets, computational optimization, and neuro-fuzzy systems.







Optical Fiber Telecommunications Volume VIB


Book Description

Optical Fiber Telecommunications VI (A&B) is the sixth in a series that has chronicled the progress in the R&D of lightwave communications since the early 1970s. Written by active authorities from academia and industry, this edition brings a fresh look to many essential topics, including devices, subsystems, systems and networks. A central theme is the enabling of high-bandwidth communications in a cost-effective manner for the development of customer applications. These volumes are an ideal reference for R&D engineers and managers, optical systems implementers, university researchers and students, network operators, and investors. Volume A is devoted to components and subsystems, including photonic integrated circuits, multicore and few-mode fibers, photonic crystals, silicon photonics, signal processing, and optical interconnections. Volume B is devoted to systems and networks, including advanced modulation formats, coherent detection, Tb/s channels, space-division multiplexing, reconfigurable networks, broadband access, undersea cable, satellite communications, and microwave photonics. - All the latest technologies and techniques for developing future components and systems - Edited by two winners of the highly prestigious OSA/IEEE John Tyndal award and a President of IEEE's Lasers & Electro-Optics Society (7,000 members) - Written by leading experts in the field, it is the most authoritative and comprehensive reference on optical engineering on the market