Accelerated Bridge Construction


Book Description

The traveling public has no patience for prolonged, high cost construction projects. This puts highway construction contractors under intense pressure to minimize traffic disruptions and construction cost. Actively promoted by the Federal Highway Administration, there are hundreds of accelerated bridge construction (ABC) construction programs in the United States, Europe and Japan. Accelerated Bridge Construction: Best Practices and Techniques provides a wide range of construction techniques, processes and technologies designed to maximize bridge construction or reconstruction operations while minimizing project delays and community disruption. - Describes design methods for accelerated bridge substructure construction; reducing foundation construction time and methods by using pile bents - Explains applications to steel bridges, temporary bridges in place of detours using quick erection and demolition - Covers design-build systems' boon to ABC; development of software; use of fiber reinforced polymer (FRP) - Includes applications to glulam and sawn lumber bridges, precast concrete bridges, precast joints details; use of lightweight aggregate concrete, aluminum and high-performance steel




Gravel Roads


Book Description

The purpose of this manual is to provide clear and helpful information for maintaining gravel roads. Very little technical help is available to small agencies that are responsible for managing these roads. Gravel road maintenance has traditionally been "more of an art than a science" and very few formal standards exist. This manual contains guidelines to help answer the questions that arise concerning gravel road maintenance such as: What is enough surface crown? What is too much? What causes corrugation? The information is as nontechnical as possible without sacrificing clear guidelines and instructions on how to do the job right.




Flagging Handbook


Book Description




Roadside Design Guide


Book Description




Traffic Controls for Construction and Maintenance Work Zones: Office function


Book Description

Volume I illustrates many of the typical worksites describing the most common conditions encountered. The information provided can be used to supplement local, state, and national standards. The topics include, among others: Public information, regulatory control, special traffic provisions, protection of pedestrians, flagging, temporary traffic signals, and nighttime procedures. Volume II is intended primarily for use by job site supervisors. It addresses the most common situations, problems and solutions that supervisors might be faced with. The topics include, among others: Emergency work moving operations, temporary traffic control devices, placing devices, temporary removal of signs, and pedestrian needs.




Guide Specifications for Seismic Isolation Design


Book Description

This edition is based on the work of NCHRP project 20-7, task 262 and updates the 2nd (1999) edition -- P. ix.




Cal/OSHA Pocket Guide for the Construction Industry


Book Description

The Cal/OSHA Pocket Guide for the Construction Industry is a handy guide for workers, employers, supervisors, and safety personnel. This latest 2011 edition is a quick field reference that summarizes selected safety standards from the California Code of Regulations. The major subject headings are alphabetized and cross-referenced within the text, and it has a detailed index. Spiral bound, 8.5 x 5.5"




Assessing and Managing the Ecological Impacts of Paved Roads


Book Description

All phases of road developmentâ€"from construction and use by vehicles to maintenanceâ€"affect physical and chemical soil conditions, water flow, and air and water quality, as well as plants and animals. Roads and traffic can alter wildlife habitat, cause vehicle-related mortality, impede animal migration, and disperse nonnative pest species of plants and animals. Integrating environmental considerations into all phases of transportation is an important, evolving process. The increasing awareness of environmental issues has made road development more complex and controversial. Over the past two decades, the Federal Highway Administration and state transportation agencies have increasingly recognized the importance of the effects of transportation on the natural environment. This report provides guidance on ways to reconcile the different goals of road development and environmental conservation. It identifies the ecological effects of roads that can be evaluated in the planning, design, construction, and maintenance of roads and offers several recommendations to help better understand and manage ecological impacts of paved roads.




Safety at Street Works and Road Works


Book Description

This publication sets out the statutory requirements for signing, lighting, and guarding at street works and road works. This is the core reference manual for utility companies, local authorities, street work contractors and others whose day-to-day business involves street works (works by statutory undertakers and other utility companies etc) and road works (works to maintain or repair road infrastructure). The code, which covers all of the UK and includes national variations, is now compulsory for highway/road authorities in England, Wales and Northern Ireland. It applies to all single carriageway roads and dual carriageways with a speed limit of 40 mph or less. The code is now divided into three parts: Basic Principles, Operations, and Equipment and Vehicles; site layout diagrams have been redrawn to make them easier to understand. There is: increased emphasis on using risk assessment and guidance on what to consider in such assessments; strengthened guidance on providing for pedestrians and cyclists and new guidance on traffic control measures related to road closures, one-way working and temporary road obstructions; enhanced advice on other traffic control measures including works near tramways and railways, and mobile/short duration works; and updated advice on high visibility clothing and the signing and conspicuity requirements for work vehicles. Effective from 1 October 2014 when it will supersede the 2001 edition (ISBN 9780115519581).




Roundabouts


Book Description

TRB's National Cooperative Highway Research Program (NCHRP) Report 672: Roundabouts: An Informational Guide - Second Edition explores the planning, design, construction, maintenance, and operation of roundabouts. The report also addresses issues that may be useful in helping to explain the trade-offs associated with roundabouts. This report updates the U.S. Federal Highway Administration's Roundabouts: An Informational Guide, based on experience gained in the United States since that guide was published in 2000.