MATERIAL SELECTION AND CORROSION - Volume II


Book Description

These volumes are a component of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The books are concerned with the development and selection of the best possible material for a particular engineering task and the determination of the most effective method of producing the materials and the component. The complexity of modern processing and the need for efficient production and use of materials are discussed and illustrated by examples from current practice. Properties are determined by structure, which in turn depends on the processing route. Theses volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy and Decision Makers.




Materials Selection for Corrosion Control


Book Description

Provides a methodology for integrating materials selection with the design process, including simultaneous technical and economic evaluation. Save hours of frustrating research time: Get fast answers about the best material for a particular application. In the past, researching the endless sources on corrosion and materials in their countless applications were next to impossible. That's why this book was written: to help simplify your materials selection problems. It's an exhaustive source on the different corrosion-resistant materials, types of corrosion, factors affecting corrosion, passivation, corrosion monitoring, corrosion control measures, methodology of materials selection, and more.




Corrosion and Materials Selection


Book Description

The petroleum and chemical industries contain a wide variety of corrosive environments, many of which are unique to these industries. Oil and gas production operations consume a tremendous amount of iron and steel pipe, tubing, pumps, valves, and sucker rods. Metallic corrosion is costly. However, the cost of corrosion is not just financial. Beyond the huge direct outlay of funds to repair or replace corroded structures are the indirect costs – natural resources, potential hazards, and lost opportunity. Wasting natural resources is a direct contradiction to the growing need for sustainable development. By selecting the correct material and applying proper corrosion protection methods, these costs can be reduced, or even eliminated. This book provides a minimum design requirement for consideration when designing systems in order to prevent or control corrosion damage safely and economically, and addresses: • Corrosion problems in petroleum and chemical industries • Requirements for corrosion control • Chemical control of corrosive environments • Corrosion inhibitors in refineries and petrochemical plants • Materials selection and service life of materials • Surface preparation, protection and maintainability • Corrosion monitoring - plant inspection techniques and laboratory corrosion testing techniques Intended for engineers and industry personnel working in the petroleum and chemical industries, this book is also a valuable resource for research and development teams, safety engineers, corrosion specialists and researchers in chemical engineering, engineering and materials science.




MATERIAL SELECTION AND CORROSION - Volume I


Book Description

These volumes are a component of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The books are concerned with the development and selection of the best possible material for a particular engineering task and the determination of the most effective method of producing the materials and the component. The complexity of modern processing and the need for efficient production and use of materials are discussed and illustrated by examples from current practice. Properties are determined by structure, which in turn depends on the processing route. Theses volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy and Decision Makers.




HISTORY, DEVELOPMENT AND MANAGEMENT OF WATER RESOURCES - Volume II


Book Description

These volumes are part of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The two volumes present state-of-the art subject matter of various aspects of History, Development and Management of Water Resources These volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy and Decision Makers.




COMMON FUNDAMENTALS AND UNIT OPERATIONS IN THERMAL DESALINATION SYSTEMS - Volume II


Book Description

These volumes are part of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The three volumes present state-of-the art subject matter of various aspects of Common Fundamentals and Unit Operations in Thermal Desalination Systems such as: Conventional Water Treatment Technologies; Guidelines for Potable Water Purification; Advanced Treatment Technologies for Recycle - Reuse of Domestic Wastewater; Composition of Desalinated Water; Crystallization; Deep Bed Filtration: Modeling Theory and Practice; Distillation ; Rectification; Flocculation and Flocculation Filtration; Hazardous Waste Treatment Technologies; Microfiltration and Ultrafiltration; Post-Treatment of Distillate and Permeate; Pre-Cleaning Measures: Filtration; Raw Water Pre-Treatment: Sludge Treatment Technologies; Supercritical Extraction; Potential for Industrial Wastewater Reuse; Treatment of Industrial Wastewater by Membrane Bioreactors; Unconventional Sources of Water Supply; Problem of Non-Condensable Gas Release in Evaporators; Entrainment in Evaporators; Mist Eliminators; Chemical Hazards in Seawater Desalination by the Multistage-Flash Evaporation Technique; Concentration of Liquid Foods; Environmental Impact of Seawater Desalination Plants; Environmental Impacts of Intakes and Out Falls; Industrial Ecology, Water Resources, and Desalination; Rural and Urban Water Supply and Sanitation; Sustainable Development, Water Supply and Sanitation Technology These volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy and Decision Makers.




Handbook of Materials Selection


Book Description

An innovative resource for materials properties, their evaluation, and industrial applications The Handbook of Materials Selection provides information and insight that can be employed in any discipline or industry to exploit the full range of materials in use today-metals, plastics, ceramics, and composites. This comprehensive organization of the materials selection process includes analytical approaches to materials selection and extensive information about materials available in the marketplace, sources of properties data, procurement and data management, properties testing procedures and equipment, analysis of failure modes, manufacturing processes and assembly techniques, and applications. Throughout the handbook, an international roster of contributors with a broad range of experience conveys practical knowledge about materials and illustrates in detail how they are used in a wide variety of industries. With more than 100 photographs of equipment and applications, as well as hundreds of graphs, charts, and tables, the Handbook of Materials Selection is a valuable reference for practicing engineers and designers, procurement and data managers, as well as teachers and students.




THE DESALINATION PROCESSES SITE SELECTION, LAYOUT AND CIVIL WORKS - Volume I


Book Description

This volume is a component of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The volume presents state-of-the art subject matter of various aspects of The Desalination Processes Site Selection, Layout and Civil Works such as: Site selection, Design Guidelines of Seawater Intake Systems, Water Intakes by Wells And Infiltration Galleries, Effluent Discharge Using Boreholes and Ponds, Effluent Discharge Using Boreholes and Ponds, Overall Site Layout, MSF Plant Layout, Reverse Osmosis Plant Layout, Electrodialysis Plant Layout, Civil Engineering in Desalination Plants, Mechanical Vibration Insulation, Wind Design, Durability and Repair of Reinforced Concrete In Desalination Plants, Link to Power Station, Disposal and Recirculation of Saline Water. This volume is aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy and Decision Makers.




Principles of Corrosion Engineering and Corrosion Control


Book Description

Corrosion is a huge issue for materials, mechanical, civil and petrochemical engineers. With comprehensive coverage of the principles of corrosion engineering, this book is a one-stop text and reference for students and practicing corrosion engineers. Highly illustrated, with worked examples and definitions, it covers basic corrosion principles, and more advanced information for postgraduate students and professionals. Basic principles of electrochemistry and chemical thermodynamics are incorporated to make the book accessible for students and engineers who do not have prior knowledge of this area. Each form of corrosion covered in the book has a definition, description, mechanism, examples and preventative methods. Case histories of failure are cited for each form. End of chapter questions are accompanied by an online solutions manual.* Comprehensively covers the principles of corrosion engineering, methods of corrosion protection and corrosion processes and control in selected engineering environments* Structured for corrosion science and engineering classes at senior undergraduate and graduate level, and is an ideal reference that readers will want to use in their professional work* Worked examples, extensive end of chapter exercises and accompanying online solutions and written by an expert from a key pretochemical university




Materials Selection for Hydrocarbon and Chemical Plants


Book Description

Describes the systematic procedure for using process and mechanical design information to select construction materials suitable for a range of chemical and hydrocarbon processing plants. The volume features tables for locating the American Society for Testing and Materials (ASTM) product form specifications for construction materials that have code-allowable design stresses. It analyzes threshold values for degradation phenomena involving thermal damage.