Book Description

Mechanical, thermal, and physical property test data was generated for as-fabricated advanced composite materials at room temperature (RT), -150 and 250 F. The results are documented of mechanical and thermophysical property tests of IM7/PEEK and discontinuous SiC/Al (particulate (p) and whisker (w) reinforced) composites which were tested at three different temperatures to determine the effect of temperature on material properties. The specific material systems tested were IM7/PEEK (0)8, (0, + or - 45, 90)s, (+ or - 30, 04)s, 25 vol. pct. (v/o) SiCp/Al, and 25 v/o SiCw/Al. RT material property results of IM7/PEEK were in good agreement with the predicted values, providing a measure of consolidation integrity attained during fabrication. Results of mechanical property tests indicated that modulus values at each test temperature were identical, whereas the strength (e.g., tensile, compressive, flexural, and shear) values were the same at -150 F, and RT, and gradually decreased as the test temperature was increased to 250 F. Similar trends in the strength values was also observed in discontinuous SiC/Al composites. These results indicate that the effect of temperature was more pronounced on the strength values than modulus values. Rawal, Suraj P. and Misra, Mohan S. METAL MATRIX COMPOSITES; ROOM TEMPERATURE; SILICON CARBIDES; TEMPERATURE EFFECTS; THERMAL STABILITY; THERMODYNAMIC PROPERTIES; THERMOPHYSICAL PROPERTIES; WHISKER COMPOSITES; COMPRESSIBILITY; CONSOLIDATION; DELAMINATING; DIMENSIONAL STABILITY; FABRICATION; MICROCRACKS; NONDESTRUCTIVE TESTS; PARTICULATES; RESIDUAL STRESS; TECHNOLOGY UTILIZATION; THERMAL CYCLING TESTS...