MEMS and Nanotechnology, Volume 6


Book Description

MEMS and Nanotechnology, Volume 6: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics represents one of seven volumes of technical papers presented at the Society for Experimental Mechanics SEM 12th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 11-14, 2012. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Challenges in Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, Imaging Methods for Novel Materials and Challenging Applications, Experimental and Applied Mechanics, Mechanics of Biological Systems and Materials and, Composite Materials and Joining Technologies for Composites.




MEMS and Nanotechnology, Volume 2


Book Description

This the second volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 40 chapters on Microelectromechanical Systems and Nanotechnology. It presents early findings from experimental and computational investigations on MEMS and Nanotechnology including contributions on Nanomechanical Standards, Magneto-mechanical MEMS Sensors, Piezoelectric MEMS for Energy Harvesting, and Linear and Nonlinear Mass Sensing.




Experimental and Applied Mechanics, Volume 6


Book Description

This the sixth volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 128 chapters on Experimental and Applied Mechanics. It presents early findings from experimental and computational investigations including High Accuracy Optical Measurements of Surface Topography, Elastic Properties of Living Cells, Standards for Validating Stress Analyses by Integrating Simulation and Experimentation, Efficiency Enhancement of Dye-sensitized Solar Cell, and Blast Performance of Sandwich Composites With Functionally Graded Core.




MEMS and Nanotechnology, Volume 4


Book Description

MEMS and Nanotechnology, Volume 4 represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.




Electrochemical Micromachining for Nanofabrication, MEMS and Nanotechnology


Book Description

Electrochemical Micromachining for Nanofabrication, MEMS and Nanotechnology is the first book solely dedicated to electrochemical micromachining (EMM). It begins with fundamentals, techniques, processes, and conditions, continuing with in-depth discussions of mechanisms of material removal, including an empirical model on the material removal rate for EMM (supported by experimental validation). The book moves next to construction-related features of EMM setup suitable for industrial micromachining applications, varying types of EMM, and the latest developments in the improvement of EMM setup. Further, it covers power supply, roll of electrolyte, and other major factors influencing EMM processes, and reports research findings concerning the improvement of machining accuracy and efficiency. Finally, the book devotes a chapter to the design and development of micro-tools, one of the most vital components in EMM. - Covers the generation of micro features used for advanced engineering of materials for fabrication of MEMS, microsystems and other micro-engineering applications - Explores the trend of decreasing size of fabricated devices, reflected in coverage of generation of high-precision nano-features on metal and semiconductors utilizing SPM, STM, and AFM, and nanotechnology aspects of EMM - Describes nanofabrication utilizing anodic dissolutions for mass manufacturing by overcoming obstacles utilizing electrochemical microsystem technology (EMST) and electrochemical nanotechnology (ENT)




MEMS and Nanotechnology, Volume 5


Book Description

MEMS and Nanotechnology, Volume 5: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics, the fifth volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Microelectronics Packaging Single Atom/Molecule Mechanical Testing MEMS Devices & Fabrication In-Situ Mechanical Testing Nanoindentation Experimental Analysis of Low-Dimensional Materials for Nanotechnology




Enabling Technology for MEMS and Nanodevices


Book Description

Mikro- und Nanotechnik haben Wissenschaft und Forschung revolutioniert. In Zukunft werden sie auch den Alltag verändern. Nun liegt der erste Band einer neuen Buchreihe vor: Advanced Micro and Nano Systems 1. Henry Baltes und seine Co-Autoren knüpfen mit AMN an die Sensors Update-Reihe an. Das Autorenteam wurde um weitere Experten erweitert. AMN wird zwei Mal pro Jahr mit einem neuen Band die aktuellen Entwicklungen in der Mikro- und Nano-Welt begleiten. Die Erforschung und der Einsatz von Mikro- und Nanosystemen sind eines der brandaktuellen Themen im Wissenschaftsbereich. Die Forschungsergebnisse werden mehr und mehr auch konkret umgesetzt. Damit werden Mikro- und Nanotechnologie zu Wirtschaftsfaktoren. Aktuelle Entwicklungen, neue Technologien, Nano-Bauelemente und Systeme im Mikromaßstab - Advanced Micro and Nano Systems, die neue Buchreihe, wird Spiegel der spannenden und faszinierenden Mikro- und Nano-Welt sein. Zweimal pro Jahr wird es einen neuen AMN-Band geben. Die Autoren sind ausgewiesene Spezialisten. Zu den Herausgebern zählt Henry Baltes, Professor an der ETH Zürich. Er zeichnete bereits für die Bände der Sensors Update-Reihe verantwortlich. Die Artikel ermöglichen Neueinsteigern einen ersten Zugriff auf die Materie. Fachleute erhalten einen umfassenden Überblick. Anspruch der Herausgeber ist es, nicht nur die theoretischen Grundlagen von Mikro- und Nanosystemen zu reflektieren, sondern immer auch praktische Möglichkeiten und die Grenzen der Anwendung im Blick zu haben. Die AMN-Bände sind Handbücher und Nachschlagewerke in einem. Die Reihe richtet sich an Vertreter unterschiedlicher Fachrichtungen: Biologie, Chemie, Mathematik, Sensorindustrie und Materialwissenschaften.




Experimental and Applied Mechanics, Volume 6


Book Description

Experimental and Applied Mechanics, Volume 6: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics, the sixth volume of eight from the Conference, brings together contributions to important areas of research and engineering. The collection presents early findings and case studies on a wide range of topics, including: Advances in Residual Stress Measurement Methods Residual Stress Effects on Material Performance Inverse Problems and Hybrid Techniques Thermoelastic Stress Analysis Infrared Techniques Research in Progress Applications in Experimental Mechanics




Materials and Failures in MEMS and NEMS


Book Description

The fabrication of MEMS has been predominately achieved by etching the polysilicon material. However, new materials are in large demands that could overcome the hurdles in fabrication or manufacturing process. Although, an enormous amount of work being accomplished in the area, most of the information is treated as confidential or privileged. It is extremely hard to find the meaningful information for the new or related developments. This book is collection of chapters written by experts in MEMS and NEMS technology. Chapters are contributed on the development of new MEMS and NEMS materials as well as on the properties of these devices. Important properties such as residual stresses and buckling behavior in the devices are discussed as separate chapters. Various models have been included in the chapters that studies the mode and mechanism of failure of the MEMS and NEMS. This book is meant for the graduate students, research scholars and engineers who are involved in the research and developments of advanced MEMS and NEMS for a wide variety of applications. Critical information has been included for the readers that will help them in gaining precise control over dimensional stability, quality, reliability, productivity and maintenance in MEMS and NEMS. No such book is available in the market that addresses the developments and failures in these advanced devices.




Nanotechnology


Book Description

Nanotechnology: An Introduction, Second Edition, is ideal for the newcomer to nanotechnology, someone who also brings a strong background in one of the traditional disciplines, such as physics, mechanical or electrical engineering, or chemistry or biology, or someone who has experience working in microelectromechanical systems (MEMS) technology. This book brings together the principles, theory, and practice of nanotechnology, giving a broad, yet authoritative, introduction to the possibilities and limitations of this exciting and rapidly developing field. The book's author, Prof Ramsden, also discusses design, manufacture, and applications and their impact on a wide range of nanotechnology areas. - Provides an overview of the rapidly growing and developing field of nanotechnology - Focuses on key essentials, and structured around a robust anatomy of the subject - Brings together the principles, theory, and practice of nanotechnology, giving a broad, yet authoritative, introduction to the possibilities and limitations of this exciting and rapidly developing field