Modeling Vertical Subcooled Boiling Flows at Low Pressures


Book Description

An improved wall heat flux partitioning model at the heated surface was developed by Yeoh et al. This model, coupled with a three-dimensional two-fluid model and Multiple Size Group model, has led to satisfactory agreement being achieved between the model predictions and experimental measurements. Nevertheless, one shortcoming is the reliance on empirical correlations for the active nucleation site density in the wall heat flux partitioning model. This discrepancy brings about uncertainties, especially in appropriately evaluating the vapor generation rate, which greatly influences the model prediction on the axial and radial void fraction profiles within the bulk fluid flow. By considering the fractal model with the aforementioned subcooled boiling flow model in the absence of empirical correlations for the active nucleation site density, a comprehensive mechanistic model to predict vertically oriented subcooled boiling flows is developed. The proposed model is assessed against the experimental data of axial measurements of Zeitoun and Shoukri and the radial measurements of Yun et al. and Lee et al. for vertical subcooled boiling flows within annular channels. Improved model predictions are obtained when the model is compared against typically applied empirical correlations for active nucleation site density. Discussions on the agreement of other two-phase flow parameters are also presented.










Convective Flow Boiling


Book Description

This book comprises selected papers from the First International Conference on Convective Flow Boiling. The purpose of the conference is to examine state-of-science and recent developments in technology of flow boiling, i.e., boiling systems which are affected by convective flows.







Convective Boiling and Condensation


Book Description

* Third edition of a well-known and well established text both in industry and for teaching * Fully up-to-date and includes extra problems This book is an aid to heat exchanger design written primarily for design and development engineers in the chemical process, power generation, and refrigeration industries. It provides a comprehensive reference on two-phase flows, boiling, and condensation. The text covers all the latest advances like flows over tube bundles and two-phase heat transfer regarding refrigerants and petrochemicals. Another feature of this third edition is many new problems at chapter ends to enhance its use as a teaching text for graduate and post-graduate courses on two-phase flow and heat transfer. - ;This book is written for practising engineers as a comprehensive reference on two-phase flows, boiling, and condensation. It deals with methods for estimating two-phase flow pressure drops and heat transfer rates. It is a well-known reference book in its third edition and is also used as a text for advanced university courses. Both authors write from practical experience as both are professional engineers. -




Mesh Methods for Boundary-Value Problems and Applications


Book Description

This book gathers papers presented at the 13th International Conference on Mesh Methods for Boundary-Value Problems and Applications, which was held in Kazan, Russia, in October 2020. The papers address the following topics: the theory of mesh methods for boundary-value problems in mathematical physics; non-linear mathematical models in mechanics and physics; algorithms for solving variational inequalities; computing science; and educational systems. Given its scope, the book is chiefly intended for students in the fields of mathematical modeling science and engineering. However, it will also benefit scientists and graduate students interested in these fields.




Heat Transfer in Condensation and Boiling


Book Description

I welcome the opportunity to have my book translated, because of the great emphasis on two-phase flow and heat transfer in the English-speaking world, as related to research, university education, and industrial practice. The 1988 Springer-Verlag edition of "Warmeiibergang beim Kondensieren und beim Sieden" has been enlarged to include additional material on falling film evaporation (Chapter 12) and pressure drop in two-phase flow (Chapter 13). Minor errors in the original text have also been corrected. I would like to express my sincere appreciation to Professor Green, Asso ciate Professor of German at Rensselaer, for his excellent translation and co operation. My thanks go also to Professor Bergles for his close attention to technical and linguistic details. He carefully read the typescript and made many comments and suggestions that helped to improve the manuscript. I hope that the English edition will meet with' a favorable reception and contribute to better understanding and to progress in the field of heat transfer in condensation and boiling. February 1992 K. Stephan Preface to the German-Language Edition This book is a continuation of the series "Heat and Mass Transfer" edited by U. Grigull, in which three volumes have already been published. Its aim is to acquaint students and practicing engineers with heat transfer during condensa tion and boiling, and is intended primarily for students and engineers in mechanical, chemical, electrical, and industrial processing engineering.




Applied Mathematical Modeling


Book Description

This new book focuses on important research related to the mathematical modelling of engineering and environmental processes, manufacturing, and industrial systems. It includes heat transfer, fluid mechanics, CFD, and transport phenomena; solid mechanics and mechanics of metals; electromagnets and MHD; reliability modelling and system optimisation; finite volume, finite element, and boundary element procedures; decision sciences in an industrial and manufacturing context; civil engineering systems and structures; mineral and energy resources; relevant software engineering issues associated with CAD and CAE; and materials and metallurgical engineering.