Modelling and Observation of Exhaust Gas Concentrations for Diesel Engine Control


Book Description

The book presents a complete new methodology for the on-board measurements and modeling of gas concentrations in turbocharged diesel engines. It provides the readers with a comprehensive review of the state-of-art in NOx and lambda estimation and describes new important achievements accomplished by the author. These include: the online characterization of lambda and NOx sensors; the development of control-oriented models of lambda and NOx emissions; the design of computationally efficient updating algorithms; and, finally, the application and evaluation of the methods on-board. Because of its technically oriented approach and innovative findings on both control-oriented algorithms and virtual sensing and observation, this book offers a practice-oriented guide for students, researchers and professionals working in the field of control and information engineering.




Modelling and Observation of Exhaust Gas Concentrations for Diesel Engine Control


Book Description

The book presents a complete new methodology for the on-board measurements and modeling of gas concentrations in turbocharged diesel engines. It provides the readers with a comprehensive review of the state-of-art in NOx and lambda estimation and describes new important achievements accomplished by the author. These include: the online characterization of lambda and NOx sensors; the development of control-oriented models of lambda and NOx emissions; the design of computationally efficient updating algorithms; and, finally, the application and evaluation of the methods on-board. Because of its technically oriented approach and innovative findings on both control-oriented algorithms and virtual sensing and observation, this book offers a practice-oriented guide for students, researchers and professionals working in the field of control and information engineering.







Diesel and Gasoline Engine Exhausts and Some Nitroarenes


Book Description

This volume of the IARC Monographs provides evaluations of the carcinogenicity of diesel and gasoline engine exhausts, and of 10 nitroarenes found in diesel engine exhaust: 3,7-dinitrofluoranthene, 3,9-dinitrofluoranthene, 1,3-dinitropyrene, 1,6-dinitropyrene, 1,8-dinitropyrene, 6-nitrochrysene, 2-nitrofluorene, 1-nitropyrene, 4-nitropyrene, and 3-nitrobenzanthrone. Diesel engines are used for transport on and off roads (e.g. passenger cars, buses, trucks, trains, ships), for machinery in various industrial sectors (e.g. mining, construction), and for electricity generators, particularly in developing countries. Gasoline engines are used in cars and hand-held equipment (e.g. chainsaws). The emissions from such combustion engines comprise a complex and varying mixture of gases (e.g. carbon monoxide, nitrogen oxides), particles (e.g. PM10, PM2.5, ultrafine particles, elemental carbon, organic carbon, ash, sulfate, and metals), volatile organic compunds (e.g. benzene, formaldehyde) and semi-volatile organic compounds (e.g. polycyclic aromatic hydrocarbons) including oxygenated and nitrated derivatives of polycyclic aromatic hydrocarbons. Diesel and gasoline engines thus make a significant contribution to a broad range of air pollutants to which people are exposed in the general population as well as in different occupational settings. An IARC Monographs Working Group reviewed epidemiological evidence, animal bioassays, and mechanistic and other relevant data to reach conclusions as to the carcinogenic hazard to humans of environmental or occupational exposure to diesel and gasoline engine exhausts (including those associated with the mining, railroad, construction, and transportation industries) and to 10 selected nitroarenes. -- Back cover.




Report summaries


Book Description




Engine Modeling and Control


Book Description

The increasing demands for internal combustion engines with regard to fuel consumption, emissions and driveability lead to more actuators, sensors and complex control functions. A systematic implementation of the electronic control systems requires mathematical models from basic design through simulation to calibration. The book treats physically-based as well as models based experimentally on test benches for gasoline (spark ignition) and diesel (compression ignition) engines and uses them for the design of the different control functions. The main topics are: - Development steps for engine control - Stationary and dynamic experimental modeling - Physical models of intake, combustion, mechanical system, turbocharger, exhaust, cooling, lubrication, drive train - Engine control structures, hardware, software, actuators, sensors, fuel supply, injection system, camshaft - Engine control methods, static and dynamic feedforward and feedback control, calibration and optimization, HiL, RCP, control software development - Control of gasoline engines, control of air/fuel, ignition, knock, idle, coolant, adaptive control functions - Control of diesel engines, combustion models, air flow and exhaust recirculation control, combustion-pressure-based control (HCCI), optimization of feedforward and feedback control, smoke limitation and emission control This book is an introduction to electronic engine management with many practical examples, measurements and research results. It is aimed at advanced students of electrical, mechanical, mechatronic and control engineering and at practicing engineers in the field of combustion engine and automotive engineering.




Modelling Diesel Combustion


Book Description

Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.







Environmental Simulation Chambers: Application to Atmospheric Chemical Processes


Book Description

Atmospheric pollution has many different detrimental impacts on air quality at urban, regional and global scales. Large volume photoreactors (often referred to as smog or simulation chambers) have been used very effectively to investigate and understand many varied aspects of atmospheric chemistry related to air pollution problems. Photochemical smog formation, which was first observed around 1945 in Los Angeles, is now a major environmental problem for all industrialised and densely populated regions of the world. Over the years many different modelling and experimental tools have been developed to analyse and simulate the complex chemical processes associated with tropspheric photooxidant formation. Work in environmental chambers has played a key role in the development of our understanding of the atmospheric chemistry associated with pollution problems on local, regional and global scales. Chamber observations have also been used in connection with environmental policy issues. In general they are used for validation of atmospheric chemical models, studies of chemical reaction mechanisms and as a direct means to test the possible impact of specific chemical compounds on air quality under simulated ambient conditions New large smog chamber installations have been recently developed in the US (Riverside, California), Europe (Jülich, Germany) and Japan, and a large number of smaller scale laboratory chambers are in operation around the world. Over the years there have been numerous new technical developments related to environmental chamber facilities such as the design of the chambers (e. g.