Modern Steam Road Wagons (Classic Reprint)


Book Description

Excerpt from Modern Steam Road Wagons In designing these vehicles, not only is it absolutely necessary that the strains should be properly distributed, combining the lightest possible construction with the greatest strength, but that simplicity - inasmuch as we are dealing with a commercial article - must be ever kept in View. The two most difficult problems which have been encountered are, undoubtedly, to design a fitting boiler and proper road wheels. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.




Modern Steam Road Wagons


Book Description







Modern Steam Road Wagons


Book Description

This historic book may have numerous typos and missing text. Purchasers can usually download a free scanned copy of the original book (without typos) from the publisher. Not indexed. Not illustrated. 1906 edition. Excerpt: ...of the general design is shown in Fig. 47. The high-pressure cylinder bore has been increased i in., making it 4 in., and the low-pressure also increased A in., making it 6 in. bore. The same length of stroke, viz. 6 in., is retained. The ratios of gearing between the engine and road wheels are 19'4 and 11 to 1, giving speeds of 2 9 and 5-1 miles per hour with engine running at its normal speed of 450 revolutions per minute. Fig. 48 shows a plan of the engine and gearing. The valves are of the flat balanced pattern working on renewable faces. Unlike the smaller wagon before described, the second-motion shaft gearing runs loosely when the combined sliding clutch and pinion is out of gear with the spur wheel. The second-motion shaft is in reality a fixed steel tube with the clutch operating rod working in the hollow. The compensating shaft is clearly shown in Fig. 49. It will be noticed that the main bearings are non-adjustable. The third axle consists of a "Mannesman " tube with practically solid ends. The rear axle has bearings 11 in. long and 3 i in. in diameter, the diameter of the axle beyond the bearings being 4 in. The boiler, brakes, and steering gear are the same design as on the smaller wagon. The driving wheels are 3 ft. 6 in. diameter by 10 in. face, and the steering wheels are 3 ft. diameter by 6 in. face. The tare of this machine is 4 tons 18 cwt., THE THORNYCROFT STEAM WAGON Co., Ltd. 79 THE THORNYCROFT STEAM WAGON Co., Ltd., CHISWICK AND BASINGSTOKE This well-known firm were one of the very first to enter upon the manufacture of steam road wagons, and it is largely to them and one or two other equally enterprising pioneers that the general success of them is due. Competing wagons have been entered by Messrs....







Modern Steam Road Wagons


Book Description

This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.







Steam Wagons


Book Description

Steam wagons steam engines that carry goods on the roads developed considerably later than traction engines and steam rollers, which had started to appear in the mid 1860s. This book tells the story of steam wagons from the earliest designs through to the last models. It explains how they worked and what they did. An informative text is combined with a selection of photographs to illustrate steam wagons both at work in their heyday in the early twentieth century and in action more recently in the period in which they have become valued historical artefacts.







The Air-Brake


Book Description

Excerpt from The Air-Brake: A Practical Presentation of the Modern Developments of the Air-Brake for Steam and Electric Railroad Trains The development. Of the many accessory appliances with which the rolling stock of our railways is fitted, has been the subject of a great deal of study and investigation. Of the many appliances which have received careful and systematic study, the braking apparatus may be mentioned as one of the most important. The time when the question of braking first received attention dates back further than the time when highways became sufficiently well made and well maintained to permit of vehicles being drawn at a moderate rate of speed. When wheeled vehicles, drawn at speeds of 10 or 15 miles per hour, first made their appearance, it was found necessary to provide means by which they could be easily and quickly stopped in case of an emergency. The first carts and wagons, built for agricultural purposes, were of such construction that the resist ance of the earth and axle were sufficient to bring them to rest in a reasonable length of time on ordinary roads. In cases of steep grades, the motion was retarded by one or both wheels being locked with chains, or by a stone or piece of timber being chained to the axle and dragged along the ground behind the vehicle. It 13 interesting to note that the question of braking has steadily increased in importance as the demand for higher speed has increased. This applies equally well to all classes of vehicles, including railway trains, street and. Interurban cars, automobiles, and wagons. The first forms of braking apparatus adopted have formed the basis of almost all brake appliances which have since been employed for the same class of vehicles. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.