Moving Interface Problems and Applications in Fluid Dynamics


Book Description

This volume is a collection of research papers presented at the program on Moving Interface Problems and Applications in Fluid Dynamics, which was held between January 8 and March 31, 2007 at the Institute for Mathematical Sciences (IMS) of the National University of Singapore. The topics discussed include modeling and simulations of biological flow coupled to deformable tissue/elastic structure, shock wave and bubble dynamics and various applications including biological treatments with experimental verification, multi-medium flow or multi-phase flow and various applications including cavitation/supercavitation, detonation problems, Newtonian and non-Newtonian fluid, and many other areas. Readers can benefit from some recent research results in these areas.




Interface Problems and Methods in Biological and Physical Flows


Book Description

This volume showcases lecture notes collected from tutorials presented at the Workshop on Moving Interface Problems and Applications in Fluid Dynamics that was held between January 8 and March 31, 2007 at the Institute for Mathematical Sciences, National University of Singapore. As part of the program, these tutorials were conducted by specialists within their respective areas such as Robert Dillon, Zhilin Li, John Lowengrub, Frank Lu and Gretar Tryggvason.The topics in the program encompass modeling and simulations of biological flow coupled to deformable tissue/elastic structure, shock wave and bubble dynamics and various applications like biological treatments with experimental verification, multi-medium flow or multiphase flow and various applications including cavitation/supercavitation, detonation problems, Newtonian and non-Newtonian fluid, and many other areas.This volume stand to benefit graduate students and researchers keen in the field of interfacial flows for application to physical and biological systems. Even beginners will find this volume a very useful starting point with many relevant references applicable.




The Immersed Interface Method


Book Description

This book provides an introduction to the immersed interface method (IIM), a powerful numerical method for solving interface problems and problems defined on irregular domains for which analytic solutions are rarely available. This book gives a complete description of the IIM, discusses recent progress in the area, and describes numerical methods for a number of classic interface problems. It also contains many numerical examples that can be used as benchmark problems for numerical methods designed for interface problems on irregular domains.




Computational Fluid Dynamics


Book Description

Computational Fluid Dynamics (CFD) is an important design tool in engineering and also a substantial research tool in various physical sciences as well as in biology. The objective of this book is to provide university students with a solid foundation for understanding the numerical methods employed in today's CFD and to familiarise them with modern CFD codes by hands-on experience. It is also intended for engineers and scientists starting to work in the field of CFD or for those who apply CFD codes. Due to the detailed index, the text can serve as a reference handbook too. Each chapter includes an extensive bibliography, which provides an excellent basis for further studies.




Computational Fluid Dynamics with Moving Boundaries


Book Description

This text describes several computational techniques that can be applied to a variety of problems in thermo-fluid physics, multi-phase flow, and applied mechanics involving moving flow boundaries. Step-by-step discussions of numerical procedures include multiple examples that employ algorithms in problem-solving. In addition to its survey of contemporary numerical techniques, this volume discusses formulation and computation strategies as well as applications in many fields. Researchers and professionals in aerospace, chemical, mechanical, and materials engineering will find it a valuable resource. It is also an appropriate textbook for advanced courses in fluid dynamics, computation fluid dynamics, heat transfer, and numerical methods.




Advanced Methods for Practical Applications in Fluid Mechanics


Book Description

Whereas the field of Fluid Mechanics can be described as complicated, mathematically challenging, and esoteric, it is also imminently practical. It is central to a wide variety of issues that are important not only technologically, but also sociologically. This book highlights a cross-section of methods in Fluid Mechanics, each of which illustrates novel ideas of the researchers and relates to one or more issues of high interest during the early 21st century. The challenges include multiphase flows, compressibility, nonlinear dynamics, flow instability, changing solid-fluid boundaries, and fluids with solid-like properties. The applications relate problems such as weather and climate prediction, air quality, fuel efficiency, wind or wave energy harvesting, landslides, erosion, noise abatement, and health care.




Parallel Computational Fluid Dynamics 2004


Book Description

Parallel CFD 2004, the sixteenth international conference on Parallel Computational Fluid Dynamics and other modern scientific domains, has been held since May 24th till May 27th, 2004 in Las Palmas de Gran Canaria, Spain. The specialized, high-level Parallel CFD conferences are organised on travelling locations all over the world, yearly because of multidisciplinary subject of parallel CFD and its rapidly evolving nature.The conference featured 8 invited lectures, 3 Mini Symposia, contributed papers and one Tutorial & Short Course. More than 80 multi-disciplinary presentations of the Parallel CFD had been presented, with participants from 17 countries. The sessions involved contributed papers on many diverse subjects including turbulence, complex flows, unstructured and adaptive grids, industrial applications, developments in software tools and environments as parallel optimization tools. This Book presents an up-to-date overview of the state of the art in parallel computational fluid dynamics.- Report on current research in the field.- Researchers around the world are included.- Subject is important to all interested in solving large fluid dynamics problems.- It is of interest to researchers in computer science, engineering and physical sciences.- It is an interdisciplinary activity. Contributions include scientists with a variety of backgrounds.- It is an area which is rapidly changing.




Computational and Experimental Fluid Mechanics with Applications to Physics, Engineering and the Environment


Book Description

The book presents a collection of selected papers from the I Workshop of the Venezuelan Society of Fluid Mechanics held on Margarita Island, Venezuela from November 4 to 9, 2012. Written by experts in their respective fields, the contributions are organized into five parts: - Part I Invited Lectures, consisting of full-length technical papers on both computational and experimental fluid mechanics covering a wide range of topics from drops to multiphase and granular flows to astrophysical flows, - Part II Drops, Particles and Waves - Part III Multiphase and Multicomponent Flows - Part IV Atmospheric and Granular Flows - and Part V Turbulent and Astrophysical Flows. The book is intended for upper-level undergraduate and graduate students as well as for physicists, chemists and engineers teaching and working in the field of fluid mechanics and its applications. The contributions are the result of recent advances in theoretical and experimental research in fluid mechanics, encompassing both fundamentals as well as applications to fluid engineering design, including pipelines, turbines, flow separators, hydraulic systems and biological fluid elements, and to granular, environmental and astrophysical flows.




Cell Mechanics


Book Description

Ubiquitous and fundamental in cell mechanics, multiscale problems can arise in the growth of tumors, embryogenesis, tissue engineering, and more. Cell Mechanics: From Single Scale-Based Models to Multiscale Modeling brings together new insight and research on mechanical, mathematical, physical, and biological approaches for simulating the behavior




Numerical Analysis and Its Applications


Book Description

This book constitutes the thoroughly refereed post-proceedings of the Third International Conference on Numerical Analysis and Its Applications, NAA 2004, held in Rousse, Bulgaria in June/July 2004. The 68 revised full papers presented together with 8 invited papers were carefully selected during two rounds of reviewing and improvement. All current aspects of numerical analysis are addressed. Among the application fields covered are computational sciences and engineering, chemistry, physics, economics, simulation, fluid dynamics, visualization, etc.