Author : Xiaopeng Li
Publisher : Springer Science & Business Media
Page : 151 pages
File Size : 34,15 MB
Release : 2005-12-19
Category : Technology & Engineering
ISBN : 0306473097
This is the first book on the subject of multi-standard wireless receivers. It covers both the analysis and design aspects of CMOS radio receivers, with primary focus on receivers for mobile terminals. The subject of multi-standard data converter design for base stations is also covered.
Author : Esteban Tlelo-Cuautle
Publisher : Springer Science & Business Media
Page : 327 pages
File Size : 45,53 MB
Release : 2012-07-27
Category : Technology & Engineering
ISBN : 1461413834
This book presents theory, design methods and novel applications for integrated circuits for analog signal processing. The discussion covers a wide variety of active devices, active elements and amplifiers, working in voltage mode, current mode and mixed mode. This includes voltage operational amplifiers, current operational amplifiers, operational transconductance amplifiers, operational transresistance amplifiers, current conveyors, current differencing transconductance amplifiers, etc. Design methods and challenges posed by nanometer technology are discussed and applications described, including signal amplification, filtering, data acquisition systems such as neural recording, sensor conditioning such as biomedical implants, actuator conditioning, noise generators, oscillators, mixers, etc. Presents analysis and synthesis methods to generate all circuit topologies from which the designer can select the best one for the desired application; Includes design guidelines for active devices/elements with low voltage and low power constraints; Offers guidelines for selecting the right active devices/elements in the design of linear and nonlinear circuits; Discusses optimization of the active devices/elements for process and manufacturing issues of nanometer technology.
Author : Marzuki, Arjuna
Publisher : IGI Global
Page : 379 pages
File Size : 43,75 MB
Release : 2011-08-31
Category : Technology & Engineering
ISBN : 1605668877
Monolithic Microwave Integrated Circuit (MMIC) is an electronic device that is widely used in all high frequency wireless systems. In developing MMIC as a product, understanding analysis and design techniques, modeling, measurement methodology, and current trends are essential.Advances in Monolithic Microwave Integrated Circuits for Wireless Systems: Modeling and Design Technologies is a central source of knowledge on MMIC development, containing research on theory, design, and practical approaches to integrated circuit devices. This book is of interest to researchers in industry and academia working in the areas of circuit design, integrated circuits, and RF and microwave, as well as anyone with an interest in monolithic wireless device development.
Author : Adem Aktas
Publisher : Springer Science & Business Media
Page : 189 pages
File Size : 42,95 MB
Release : 2007-05-08
Category : Technology & Engineering
ISBN : 1402080603
CMOS PLLs and VCOs for 4G Wireless is the first book devoted to the subject of CMOS PLL and VCO design for future broadband 4th generation wireless devices. These devices will be handheld-centric, requiring very low power consumption and small footprint. They will be able to work across multiple bands and multiple standards covering WWAN (GSM,WCDMA) ,WLAN(802.11 a/b/g) and WPAN(Bluetooth) with different modulations, channel bandwidths , phase noise requirements ,etc. As such, this book discusses design, modeling and optimization techniques for low power fully integrated broadband PLLs and VCOs in deep submicron CMOS. First, the PLL and VCO performances are studied in the context of the chosen multi-band multi-standard, radio architecture and the adopted frequency plan. Next a thorough study of the design requirements for broadband PLL/VCO design is conducted together with modeling techniques for noise sources in a PLL and VCO focusing on optimization of integrated phase noise for multi-carrier OFDM 64-QAM type applications. Design examples for multi-standard 802.111a/b/g as well as for GSM/WCDMA are fully described and experimental results from 0.18 micron CMOS test chips have demonstrated the validity of the proposed design and optimization techniques. Equally important the work describes techniques for robust high volume production of RF radios in general and for integrated PLL/VCO design in particular including issues such as supply sensitivity, ground bounce and calibration mechanisms. CMOS PLLS and VCOs for 4G Wireless will be of interest to graduate students in electrical and computer engineering, design managers and RFIC designers in wireless semiconductor companies.
Author : Mohammed Ismail
Publisher : Springer Science & Business Media
Page : 341 pages
File Size : 43,11 MB
Release : 2007-06-16
Category : Technology & Engineering
ISBN : 1402048246
Radio Design in Nanometer Technologies is the first volume that looks at the integrated radio design problem as a "piece of a big puzzle", namely the entire chipset or single chip that builds an entire wireless system. This is the only way to successfully design radios to meet the stringent demands of today’s increasingly complex wireless systems.
Author : Alonso Morgado
Publisher : Springer Science & Business Media
Page : 297 pages
File Size : 41,3 MB
Release : 2011-09-15
Category : Technology & Engineering
ISBN : 1461400376
This book presents innovative solutions for the implementation of Sigma-Delta Modulation (SDM) based Analog-to-Digital Conversion (ADC), required for the next generation of wireless hand-held terminals. These devices will be based on the so-called multi-standard transceiver chipsets, integrated in nanometer CMOS technologies. One of the most challenging and critical parts in such transceivers is the analog-digital interface, because of the assorted signal bandwidths and dynamic ranges that can be required to handle the A/D conversion for several operation modes. This book describes new adaptive and reconfigurable SDM ADC topologies, circuit strategies and synthesis methods, specially suited for multi-standard wireless telecom systems and future Software-defined-radios (SDRs) integrated in nanoscale CMOS. It is a practical book, going from basic concepts to the frontiers of SDM architectures and circuit implementations, which are explained in a didactical and systematic way. It gives a comprehensive overview of the state-of-the-art performance, challenges and practical solutions, providing the necessary insight to implement successful design, through an efficient design and synthesis methodology. Readers will learn a number of practical skills – from system-level design to experimental measurements and testing.
Author : Mingliang (Michael) Liu
Publisher : Elsevier
Page : 332 pages
File Size : 43,64 MB
Release : 2006-06-12
Category : Technology & Engineering
ISBN : 0080458769
This book helps engineers to grasp fundamental theories and design principles by presenting physical and intuitive explanations of switched-capacitor circuits. Numerous circuit examples are discussed and the author emphasizes the most important and fundamental principles involved in implementing state-of-the-art switched-capacitor circuits for analog signal processing and power management applications. Throughout the book, the author presents numerous step-by-step tutorials and gives practical design examples.While some quantitative analysis is necessary to understand underlying concepts, tedious mathematical equations and formal proofs are avoided. An intuitive appreciation for switched-capacitor circuits is achieved.Much of the existing information on contemporary switched-capacitor circuit applications is in the form of applications notes and data sheets for various switched-capacitor ICs. This book compiles such information in a single volume and coherently organizes and structures it.The author has his own website at www.mingliangliu.com * Step-by-step tutorials which emphasize the most fundamental principals of switched-capacitor circuits * Few tedious mathematical equations * The first easy-to-understand compilation on this subject--most information available is not very cohesive
Author : Mohammad S. Obaidat
Publisher : Springer Science & Business Media
Page : 512 pages
File Size : 34,57 MB
Release : 2012-12-06
Category : Computers
ISBN : 1441992189
Simulation and molding are efficient techniques that can aid the city and regional planners and engineers in optimizing the operation of urban systems such as traffic light control, highway toll automation, consensus building, public safety, and environmental protection. When modeling transportation systems such as freeway systems, arterial or downtown grid systems, the city planner and engineer is concerned with capturing the varied interactions between drivers, automobiles, and the infrastructure. Modeling and simulation are used to effectively optimize the design and operation of all of these urban systems. It is possible that in an urban simulation community workshop, citizens can work interactively in front of computers and be able using the click of the mouse to walk up to their own front porch, looking at the proposed shopping mall alternatives across the street from virtually any angle and proposed bridge or tunnel and see how it can reduce traffic congestion. Buildings can be scaled down or taken out, their orientation can be changed in order to check the view and orientation in order to have better site with efficient energy-conservation. The stone or brick material on a building can be replaced by colored concrete, or more trees and lampposts can be placed on the site. Such flexibility in simulation and animation allows creative ideas in the design and orientation of urban sites to be demonstrated to citizens and decision makers before final realization.
Author : Walter H.W. Tuttlebee
Publisher : John Wiley & Sons
Page : 384 pages
File Size : 15,94 MB
Release : 2006-02-24
Category : Technology & Engineering
ISBN : 047086771X
The impending advent of GSM in the early 1990s triggered massive investment that revolutionised the capability of DSP technology. A decade later, the vastly increased processing requirements and potential market of 3G has triggered a similar revolution, with a host of start-up companies claiming revolutionary technologies hoping to challenge and displace incumbent suppliers. This book, with contributions from today's major players and leading start-ups, comprehensively describes both the new approaches and the responses of the incumbents, with detailed descriptions of the design philosophy, architecture, technology maturity and software support. Analysis of SDR baseband processing requirements of cellular handsets and basestations 3G handset baseband - ASIC, DSP, parallel processing, ACM and customised programmable architectures 3G basestation baseband - DSP (including co-processors), FPGA-based approaches, reconfigurable and parallel architectures Architecture optimisation to match 3G air interface and application algorithms Evolution of existing DSP, ASIC & FPGA solutions Assessment of the architectural approaches and the implications of the trends. An essential resource for the 3G product designer, who needs to understand immediate design options within a wider context of future product roadmaps, the book will also benefit researchers and commercial managers who need to understand this rapid evolution of baseband signal processing and its industry impact.
Author : Krzysztof Iniewski
Publisher : CRC Press
Page : 696 pages
File Size : 30,32 MB
Release : 2017-12-19
Category : Technology & Engineering
ISBN : 0849379970
Advanced concepts for wireless technologies present a vision of technology that is embedded in our surroundings and practically invisible. From established radio techniques like GSM, 802.11 or Bluetooth to more emerging technologies, such as Ultra Wide Band and smart dust motes, a common denominator for future progress is the underlying integrated circuit technology. Wireless Technologies responds to the explosive growth of standard cellular radios and radically different wireless applications by presenting new architectural and circuit solutions engineers can use to solve modern design problems. This reference addresses state-of-the art CMOS design in the context of emerging wireless applications, including 3G/4G cellular telephony, wireless sensor networks, and wireless medical application. Written by top international experts specializing in both the IC industry and academia, this carefully edited work uncovers new design opportunities in body area networks, medical implants, satellite communications, automobile radar detection, and wearable electronics. The book is divided into three sections: wireless system perspectives, chip architecture and implementation issues, and devices and technologies used to fabricate wireless integrated circuits. Contributors address key issues in the development of future silicon-based systems, such as scale of integration, ultra-low power dissipation, and the integration of heterogeneous circuit design style and processes onto one substrate. Wireless sensor network systems are now being applied in critical applications in commerce, healthcare, and security. This reference, which contains 25 practical and scientifically rigorous articles, provides the knowledge communications engineers need to design innovative methodologies at the circuit and system level.
