NASS GES Analytical User's Manual, 1988-2005


Book Description

One of the primary objectives of the National Highway Traffic Safety Administration (NHTSA) is to reduce the staggering human toll and property damage that motor vehicle traffic crashes impose on our society. Crashes each year result in thousands of lives lost, hundreds of thousands of injured victims, and billions of dollars in property damage. Accurate data are required to support the development, implementation, and assessment of highway safety programs aimed at reducing this toll. NHTSA uses data from many sources, including the National Automotive Sampling System General Estimates System (GES) which began operation in 1988. Providing data about all types of crashes involving all types of vehicles, the GES is used to identify highway safety problem areas, provide a basis for regulatory and consumer information initiatives, and form the basis for cost and benefit analyses of highway safety initiatives. The GES obtains its data from a nationally representative probability sample selected from the estimated 6.1 million police-reported crashes which occur annually. These crashes include those that result in a fatality or injury and those involving major property damage. Although various sources suggest that there are many more crashes that are not reported to the police, the majority of these unreported crashes involve only minor property damage and no significant personal injury. By restricting attention to police-reported crashes, the GES concentrates on those crashes of greatest concern to the highway safety community and the general public. This multi-year analytical users manual provides documentation on variables that are contained in the GES and other useful information that will enable the users to become familiar the data system.




National Automotive Sampling System (NASS) General Estimates System (GES): Analytical User's Manual, 1988-2005


Book Description

One of the primary objectives of the National Highway Traffic Safety Administration (NHTSA) is to reduce the staggering human toll and property damage that motor vehicle traffic crashes impose on our society. Crashes each year result in thousands of lives lost, hundreds of thousands of injured victims, and billions of dollars in property damage. Accurate data are required to support the development, implementation, and assessment of highway safety programs aimed at reducing this toll. NHTSA uses data from many sources, including the National Automotive Sampling System General Estimates System (GES) which began operation in 1988. Providing data about all types of crashes involving all types of vehicles, the GES is used to identify highway safety problem areas, provide a basis for regulatory and consumer information initiatives, and form the basis for cost and benefit analyses of highway safety initiatives. This multi-year analytical user's manual provides documentation on variables that are contained in the GES and other useful information that will enable the users to become familiar the data system.




National Automotive Sampling System (NASS) Crashworthiness Data System


Book Description

The National Automotive Sampling System (NASS) Crashworthiness Data System (CDS) is a nationwide crash data collection program sponsored by the U.S. Department of Transportation. It is operated by the National Center for Statistics and Analysis (NCSA) of the National Highway Traffic Safety Administration (NHTSA). The NASS CDS provides an automated, comprehensive national traffic crash database. Data collection began in 1979 in 10 geographic sites, called Primary Sampling Units (PSU's). In 2002, three additional PSUs were added to the system so that the 2004 NASS CDS file contains data from 27 PSU's. These data are weighted to represent all police reported motor vehicle crashes occurring in the USA during the year involving passenger cars, light trucks and vans that were towed due to damage. The NASS program was re-evaluated in the mid-1980's. This re-evaluation resulted in changes, which were implemented by NHTSA in January 1988. NASS now has two major operating components: (1) the General Estimates System (GES) which collects data on a sample of police traffic crash reports; and (2) the Crashworthiness Data System (CDS) which collects additional detailed information on a sample of police reported traffic crashes.




Development of Crash Imminent Test Scenarios for Integrated Vehicle-Based Safety Systems (IVBSS)


Book Description

This report identifies crash imminent test scenarios based on common pre-crash scenarios for integrated vehicle-based safety systems that alert the driver of a light vehicle or a heavy truck to an impending rear-end, lane change, or run-off-road crash. Pre-crash scenarios describe vehicle movements and critical events immediately prior to the crash. The General Estimates System (GES) crash database was queried to distinguish common pre-crash scenarios for light vehicles (2003 GES) and heavy trucks (2000-2003 GES) in terms of their frequency of occurrence. Analysis of two-vehicle rear-end crashes revealed four dominant scenarios that accounted for 97 percent of light-vehicle crashes and 95 percent of heavy-truck crashes in which the subject vehicle was striking. Four scenarios were also identified from an analysis of two-vehicle lane change crashes, comprising 65 percent of light-vehicle crashes and 76 percent of heavy-truck crashes in which the subject vehicle was encroaching onto another vehicle in adjacent lanes. There were five single-vehicle, run-off-road scenarios representing 63 percent of light-vehicle crashes and 83 percent of heavy-truck crashes, excluding crashes caused by vehicle failure or evasive maneuver. An additional set of scenarios is proposed to address multiple threats from near simultaneous critical events. This report also provides a statistical description of individual scenarios in terms of their environmental factors, roadway geometry, and speed conditions.




Accidental Injury


Book Description

This book provides a state-of-the-art look at the applied biomechanics of accidental injury and prevention. The editors, Drs. Narayan Yoganandan, Alan M. Nahum and John W. Melvin are recognized international leaders and researchers in injury biomechanics, prevention and trauma medicine. They have assembled renowned researchers as authors for 29 chapters to cover individual aspects of human injury assessment and prevention. This third edition is thoroughly revised and expanded with new chapters in different fields. Topics covered address automotive, aviation, military and other environments. Field data collection; injury coding/scaling; injury epidemiology; mechanisms of injury; human tolerance to injury; simulations using experimental, complex computational models (finite element modeling) and statistical processes; anthropomorphic test device design, development and validation for crashworthiness applications in topics cited above; and current regulations are covered. Risk functions and injury criteria for various body regions are included. Adult and pediatric populations are addressed. The exhaustive list of references in many areas along with the latest developments is valuable to all those involved or intend to pursue this important topic on human injury biomechanics and prevention. The expanded edition will interest a variety of scholars and professionals including physicians, biomedical researchers in many disciplines, basic scientists, attorneys and jurists involved in accidental injury cases and governmental bodies. It is hoped that this book will foster multidisciplinary collaborations by medical and engineering researchers and academicians and practicing physicians for injury assessment and prevention and stimulate more applied research, education and training in the field of accidental-injury causation and prevention.













Child Anthropometry for Improved Vehicle Occupant Safety


Book Description

A detailed understanding of the size, shape, and postures of children is required to design effective restraint systems for protecting children in motor vehicle crashes. Compiled and edited by experts in the fields of anthropometry, ergonomics, and child restraint, this book includes 14 important papers which provide a comprehensive overview of the methods for collecting, analyzing, and applying child anthropometry data for crash safety purposes. A detailed understanding of the size, shape, and postures of children is required to design effective restraint systems for protecting children in motor vehicle crashes. Compiled and edited by experts in the fields of anthropometry, ergonomics, and child restraint, this book includes 14 important papers which provide a comprehensive overview of the methods for collecting, analyzing, and applying child anthropometry data for crash safety purposes.




The Greenhouse Gas Protocol


Book Description

The GHG Protocol Corporate Accounting and Reporting Standard helps companies and other organizations to identify, calculate, and report GHG emissions. It is designed to set the standard for accurate, complete, consistent, relevant and transparent accounting and reporting of GHG emissions.