Network Coding-aided MAC Protocols for Cooperative Wireless Networks


Book Description

The introduction of third generation (3G) technologies has caused a vast proliferation of wireless devices and networks, generating an increasing demand for high level Quality of Service (QoS). The wide spread of mobile applications has further reinforced the user need for communication, motivating at the same time the concepts of user cooperation and data dissemination. However, this trend towards continuous exchange of information and ubiquitous connectivity is inherently restricted by the energy-greedy functionalities of high-end devices. These limitations, along with the pressure exerted on the Information and Communications Technology (ICT) industry towards energy awareness, have induced the design of novel energy efficient schemes and algorithms. In this context, the Medium Access Control (MAC) layer plays a key role, since it is mainly responsible for the channel access regulation, the transmission scheduling and the resource allocation, thus constituting an appropriate point to effectively address energy efficiency issues that arise due to the users overcrowding. This dissertation provides a contribution to the design, analysis and evaluation of novel MAC protocols for cooperative wireless networks. In our attempt to design energy efficient MAC schemes, we were extensively assisted by the introduction of new techniques, such as Network Coding (NC), that intrinsically bring considerable gains in system performance. The main thesis contributions are divided into two parts. The first part presents NCCARQ, a novel NC-aided Cooperative Automatic Repeat reQuest (ARQ) MAC protocol for wireless networks. NCCARQ introduces a new access paradigm for cooperative ARQ schemes, exploiting NC benefits in bidirectional communication among wireless users. The NCCARQ performance in terms of QoS and energy efficiency is assessed by means of analytical probabilistic models and extensive computer-based simulations, revealing the significant gains we can achieve compared to standardized MAC solutions. In addition, the impact of realistic wireless channel conditions on the MAC protocol operation further motivated us to study the NCCARQ performance in wireless links affected by correlated shadowing, showing that the channel correlation may adversely affect the distributed cooperation benefits. The second part of the thesis is dedicated to the investigation of MAC issues in wireless data dissemination scenarios. In particular, the existence of multiple source nodes in such scenarios generates conflicting situations, considering the selfish behavior of the wireless devices that want to maximize their battery lifetime. Bearing in mind the energy efficiency importance, we propose game theoretic medium access strategies, applying energy-based utility functions which inherently imply energy awareness. In addition, Random Linear NC (RLNC) techniques are adopted to eliminate the need of exchanging excessive control packets, while Analog NC (ANC) is employed to efface the impact of collisions throughout the communication. During the elaboration of this thesis, two general key conclusions have been extracted. First, there is a fundamental requirement for implementation of new MAC protocols in order to effectively deal with state-of-the-art techniques (e.g., NC), recently introduced to enhance both the performance and the energy efficiency of the network. Second, we highlight the importance of designing novel energy efficient MAC protocols, taking into account that traditional approaches - designed mainly to assist the collision avoidance in wireless networks - tend to be obsolete.







Protocol Design and Analysis for Cooperative Wireless Networks


Book Description

This book focuses on the design and analysis of protocols for cooperative wireless networks, especially at the medium access control (MAC) layer and for crosslayer design between the MAC layer and the physical layer. It highlights two main points that are often neglected in other books: energy-efficiency and spatial random distribution of wireless devices. Effective methods in stochastic geometry for the design and analysis of wireless networks are also explored. After providing a comprehensive review of existing studies in the literature, the authors point out the challenges that are worth further investigation. Then, they introduce several novel solutions for cooperative wireless network protocols that reduce energy consumption and address spatial random distribution of wireless nodes. For each solution, the book offers a clear system model and problem formulation, details of the proposed cooperative schemes, comprehensive performance analysis, and extensive numerical and simulation results that validate the analysis and examine the performance under various conditions. The last section of this book reveals several potential directions for the research on cooperative wireless networks that deserve future exploration. Researchers, professionals, engineers, and consultants in wireless communication and mobile networks will find this book valuable. It is also helpful for technical staff in mobile network operations, wireless equipment manufacturers, wireless communication standardization bodies, and governmental regulation agencies.













Distributed Coding for Wireless Cooperative Networks


Book Description

With the rapid growth of wireless technologies, devices and mobile applications, the quest of high throughput and ubiquitous connectivity in wireless communications increases rapidly as well. Relaying is undoubtedly a key concept to provide coverage extension and capacity increase in wireless networks. Network coding, which allows the intermediate nodes to share their computation capabilities in addition to their resource and their power, has grabbed a significant research attention since its inception in information theory. It has become an attractive candidate to bring promising performance improvement, especially in terms of throughput, in relay-based cellular networks. Substantial research efforts are currently focused on theoretical analysis, implementation and evaluation of network coding from a physical layer perspective. The question is, what is the most efficient and practical way to use network coding in wireless relay-based networks, and whether it is beneficial to exploit the broadcast and multiple-access properties of the wireless medium to perform network coding. It is in such a context, that this thesis proceeds. In the first part of the thesis, the problem of Joint Network-Channel Coding (JNCC) for a Multiple Access Relay Channel (MARC) is investigated in the presence of multiple access interferences and for both of the relay operating modes, namely, half-duplex and full-duplex. To this end, three new classes of MARC, referred to as Half-Duplex Semi-Orthogonal MARC (HD-SOMARC), Half-Duplex Non-Orthogonal MARC (HD-NOMARC), and Full-Duplex Non-Orthogonal MARC (FD-NOMARC) have been introduced and studied. The relaying function in all of the classes is based on a Selective Decode-and-Forward (SDF) strategy, which is individually implemented for each source, i.e, the relay forwards only a deterministic function of the error-free decoded messages. For each class, an information-theoretic analysis is conducted, and practical coding and decoding techniques are proposed. The proposed coding schemes, perform very close to the outage limit for both cases of HD-SOMARC and HD-NOMARC. Besides, in the case of HD-NOMARC, the optimal allocation of the transmission time to the relay is considered. It is also verified that exploiting multiple access interferences, either partially or totally, results in considerable gains for MARC compared to the existing interference-avoiding structures, even in the case of single receive antenna. In the second part of the thesis, the network model is extended by considering multiple relays which help multiple sources to communicate with a destination. A new class of Multiple Access Multiple Relay Channel (MAMRC), referred to as Half-Duplex Semi-Orthogonal MAMRC (HD-SOMAMRC) is then proposed and analyzed from both information theoretic and code design perspective. New practical JNCC schemes are proposed, in which binary channel coding and non binary network coding are combined, and they are shown to perform very close to the outage limit. Moreover, the optimal allocation of the transmission time to the sources and relays is considered. Finally, in the third part of the thesis, different ways of implementing cooperation, including practical relaying protocols are investigated for the half-duplex MARC with semi-orthogonal transmission protocol and in the case of JNCC. The hard SDF approach is compared with two Soft Decode and Forward (SoDF) relaying functions: one based on log a posterior probability ratios (LAPPRs) and the other based on Mean Square Error (MSE) estimate. It is then shown that SDF works well in most of the configurations and just in some extreme cases, soft relaying functions (based on LAPPR or MSE estimate) can slightly outperform the hard selective one.




Cooperative Communications


Book Description

Cooperative Communications reviews progress in cooperative communication networks. It assembles a representative sample of recent results to serve as a roadmap for the area. The emphasis is on wireless networks, but many of the results apply to cooperation in wireline networks and mixed wireless/wireline networks. Cooperative Communications is intended as a tutorial for the reader who is familiar with information theory concepts but has not actively followed the field. For the active researcher, it serves as an invaluable digest of significant results. It is designed to encourage readers to find new ways to apply the fundamental ideas of network cooperation. It is also intended to make the area sufficiently accessible to practicing network designers.




Distributed Coding Schemes for Cooperative Wireless Networks


Book Description

Cooperative communications is a new paradigm in the wireless communications area that allows geographically distributed nodes, terminals or sensors in a wireless network to share resources or to cooperate by means of distributed processing. The main goal of cooperative communications is to attain space diversity for suppressing the effects of small or large scale fading channels. In this book, we consider the design of distributed coding schemes and protocols for wireless relay networks in which users cooperate to send their data to the destination, which results in increasing the system reliability via achieving the cooperative diversity.