Nitroarenes


Book Description

Prior to 1979, consideration of the problem of the carcinogenicity of the aromatic amine class of chemicals took place primarily in poster sessions and symposia of annual meetings of the American Association for Cancer Research and analogous international associations. In November 1979 the first meeting concerned with the aromatic amines was held in Rockville, Haryland under primary sponsorship of the National Cancer Institute. The proceedings from this meeting were published as Monograph 58 of the Journal of the National Cancel' Institute in 1981. The second meeting in this series, the Second International Conference on N-Substituted Aryl Compounds, was held in March/April of 1982 in Hot Springs, Arkansas. The National Cancer Institute and The National Center for Toxicological Research were the primary sponsors of this meeting. The proceedings were published as Volume 49 of the journal En-vil'onmental Health Perspectives in 1983. The third meeting in this series was held in April of 1987 at the Dearborn Hyatt in Dearborn, Michigan. The principal sponsor of this meeting was the Heyer L. Pre ntis Comprehensive Cancer Center of Metropolitan Detroit. The proceedings, Carcinogenic and Mutagenic Responses to Aromatic Amines and Nitroal'enes, were published in 1987 by Elsevier Press. The fourth meeting was held in Cleveland, Ohio, on July 15-19, 1989.




Diesel and Gasoline Engine Exhausts and Some Nitroarenes


Book Description

This volume of the IARC Monographs provides evaluations of the carcinogenicity of diesel and gasoline engine exhausts, and of 10 nitroarenes found in diesel engine exhaust: 3,7-dinitrofluoranthene, 3,9-dinitrofluoranthene, 1,3-dinitropyrene, 1,6-dinitropyrene, 1,8-dinitropyrene, 6-nitrochrysene, 2-nitrofluorene, 1-nitropyrene, 4-nitropyrene, and 3-nitrobenzanthrone. Diesel engines are used for transport on and off roads (e.g. passenger cars, buses, trucks, trains, ships), for machinery in various industrial sectors (e.g. mining, construction), and for electricity generators, particularly in developing countries. Gasoline engines are used in cars and hand-held equipment (e.g. chainsaws). The emissions from such combustion engines comprise a complex and varying mixture of gases (e.g. carbon monoxide, nitrogen oxides), particles (e.g. PM10, PM2.5, ultrafine particles, elemental carbon, organic carbon, ash, sulfate, and metals), volatile organic compunds (e.g. benzene, formaldehyde) and semi-volatile organic compounds (e.g. polycyclic aromatic hydrocarbons) including oxygenated and nitrated derivatives of polycyclic aromatic hydrocarbons. Diesel and gasoline engines thus make a significant contribution to a broad range of air pollutants to which people are exposed in the general population as well as in different occupational settings. An IARC Monographs Working Group reviewed epidemiological evidence, animal bioassays, and mechanistic and other relevant data to reach conclusions as to the carcinogenic hazard to humans of environmental or occupational exposure to diesel and gasoline engine exhausts (including those associated with the mining, railroad, construction, and transportation industries) and to 10 selected nitroarenes. -- Back cover.




Mutations in Man


Book Description

This year we remember the 39th anniversary of the atomic bomb explo sions in Hiroshima and Nagasaki, which led to the exposure of thou sands of people to high doses of ionizing radiations. Nearly 18 years earlier, on the 15th of September, 1927, H. J. Muller presented his paper The Problem of Genic Modification at the Fifth International Congress of Genetics in Berlin, in which he brilliantly demonstrated the muta genic activity of X-rays. In 1928, K. H. Bauer formulated his mutation theory of the origin of cancer, and already in 1914, Th. Boveri speculat ed that tumor cells originate from an abnormal chromosomal comple ment. In the meantime we have learned that also nonionizing radiation and an immense number of environmental chemicals, both, man-made and naturally occurring, are mutagenic in a variety of test systems, in cluding human cells. In no case has it been shown unequivocally that physical or chemical mutagens have led to an elevation of the mutation rate in the germ cells of man, but in view of the huge body of experi mental data this seems to be a problem of detection. It can be expect ed that germ cell mutations are induced as a consequence of exposure to mutagens in man, as yet undetectable with the methods at hand. An uncontrolled addition of mutations to the human gene pool may well have unforeseen and catastrophic consequences in future genera tions for whom we should feel responsible.







Arene Chemistry


Book Description

Organized to enable students and synthetic chemists to understand and expand on aromatic reactions covered in foundation courses, the book offers a thorough and accessible mechanistic explanation of aromatic reactions involving arene compounds. • Surveys methods used for preparing arene compounds and their transformations • Connects reactivity and methodology with mechanism • Helps readers apply aromatic reactions in a practical context by designing syntheses • Provides essential information about techniques used to determine reaction mechanisms




Handbook of Magnetic Hybrid Nanoalloys and their Nanocomposites


Book Description

This comprehensive reference work satisfies the need for in-depth and multidisciplinary coverage of the current state of the art of magnetic hybrid nanoalloys (MHNAs) and their polymer and ceramic nanocomposites. MHNAs represent one of the most challenging research areas in modern science and technology. These materials are stiff and strong with remarkable electronic, mechanical, electrical, thermal and biocompatible properties, and a high potential for multifunctional applications ranging from industry to medicine. The peer-reviewed literature is already extensive, witnessing rapid progress in experimental and theoretical studies on fundamental properties as well as various advanced applications. Part 1 covers theory, modelling, and synthesis (growth and alloying mechanisms) of MHNAs. Formation mechanisms of magneto-electric multiferroic materials, magnetic carbon nanotube (CNTs), and perovskite materials, which are a novel class of next-generation multifunctional nanomaterials, are discussed. The second part focuses on characterization techniques for electrical and dielectrical, rheological, biocompatibility, and other properties, as well as applications in the industrial, agricultural, environmental, and biomedical sectors. Finally, life cycle assessment is considered as essential to the development of nanomaterials and nanoproducts from MHNAs. Advanced undergraduate and graduate students, researchers, and other professionals in the fields of materials science and engineering, polymer science, surface science, bioengineering, and chemical engineering will find comprehensive and authoritative information for solving fundamental and applied problems in the characterization and use of these multifunctional nanomaterials.







PAHs and Related Compounds


Book Description

Environmental Chemistry is a relatively young science. Interest in this subject, however, is growing very rapidly and, although no agreement has been reached as yet about the exact content and limits of this interdisciplinary discipline, there appears to be increasing interest in seeing environmental topics which are based on chemistry embodied in this subject. One of the first objectives of Environ mental Chemistry must be the study of the environment and of natural chemical processes which occur in the environment. A major purpose of this series on Environmental Chemistry, therefore, is to present a reasonably uniform view of various aspects of the chemistry of the environment and chemical reactions occurring in the environment. The industrial activities of man have given a new dimension to Environ mental Chemistry. We have now synthesized and described over five million chemical compounds and chemical industry produces about hundred and fifty million tons of synthetic chemicals annually. We ship billions of tons of oil per year and through mining operations and other geophysical modifications, large quantities of inorganic and organic materials are released from their natural deposits. Cities and metropolitan areas of up to 15 million inhabitants produce large quantities of waste in relatively small and confined areas. Much of the chemical products and waste products of modern society are released into the environment either during production, storage, transport, use or ultimate disposal. These released materials participate in natural cycles and reactions and frequently lead to interference and disturbance of natural systems.




The Chemical Transformations of C1 Compounds


Book Description

The Chemical Transformations of C1 Compounds A comprehensive exploration of one-carbon molecule transformations The chemistry of one-carbon molecules has recently gained significant prominence as the world transitions away from a petroleum-based economy to a more sustainable one. In The Chemical Transformations of C1 Compounds, an accomplished team of chemists delivers an in-depth overview of recent developments in the field of single-carbon chemistry. The three-volume book covers all major C1 sources, including carbon monoxide, carbon dioxide, methane, methanol, formic acid, formaldehyde, carbenes, C1 halides, and organometallics. The editors have included resources discussing the main reactions and transformations into feedstock chemicals of each of the major C1 compounds reviewed in dedicated chapters. Readers will discover cutting-edge material on organic transformations with MeNO2, DMF, DCM, methyl organometallic reagents, CCl4, CHCl3, and CHBr3, as well as recent achievements in cyanation reactions via cross-coupling. The book also offers: Thorough introductions to chemical transformations of CH4, methods of CH4 activation, chemical transformations of CH3OH and synthesis alkenes from CH3OH Comprehensive explorations of the carbonylation of MeOH, CH2O in organic synthesis, organic transformations of HCO2H, and hydrogen generation from HCO2H Practical discussions of the carbonylation of unsaturated bonds with heterogeneous and homogeneous catalysts, as well as the carbonylation of C(sp2)-X bonds and C(sp3)-X bonds In-depth examinations of carbonylative C-H bond activation and radical carbonylation Perfect for organic and catalytic chemists, The Chemical Transformations of C1 Compounds is also an ideal resource for industrial chemists, chemical engineers, and practitioners at energy supply companies.




Mechanochemical Organic Synthesis


Book Description

Mechanochemical Organic Synthesis is a comprehensive reference that not only synthesizes the current literature but also offers practical protocols that industrial and academic scientists can immediately put to use in their daily work. Increasing interest in green chemistry has led to the development of numerous environmentally-friendly methodologies for the synthesis of organic molecules of interest. Amongst the green methodologies drawing attention, mechanochemistry is emerging as a promising method to circumvent the use of toxic solvents and reagents as well as to increase energy efficiency. The development of synthetic strategies that require less, or the minimal, amount of energy to carry out a specific reaction with optimum productivity is of vital importance for large-scale industrial production. Experimental procedures at room temperature are the mildest reaction conditions (essentially required for many temperature-sensitive organic substrates as a key step in multi-step sequence reactions) and are the core of mechanochemical organic synthesis. This green synthetic method is now emerging in a very progressive manner and until now, there is no book that reviews the recent developments in this area. - Features cutting-edge research in the field of mechanochemical organic synthesis for more sustainable reactions - Integrates advances in green chemistry research into industrial applications and process development - Focuses on designing techniques in organic synthesis directed toward mild reaction conditions - Includes global coverage of mechanochemical synthetic protocols for the generation of organic compounds