Thermal Energy Storage


Book Description

The ability of thermal energy storage (TES) systems to facilitate energy savings, renewable energy use and reduce environmental impact has led to a recent resurgence in their interest. The second edition of this book offers up-to-date coverage of recent energy efficient and sustainable technological methods and solutions, covering analysis, design and performance improvement as well as life-cycle costing and assessment. As well as having significantly revised the book for use as a graduate text, the authors address real-life technical and operational problems, enabling the reader to gain an understanding of the fundamental principles and practical applications of thermal energy storage technology. Beginning with a general summary of thermodynamics, fluid mechanics and heat transfer, this book goes on to discuss practical applications with chapters that include TES systems, environmental impact, energy savings, energy and exergy analyses, numerical modeling and simulation, case studies and new techniques and performance assessment methods.




Advances in Thermal Energy Storage Systems


Book Description

Thermal energy storage (TES) technologies store thermal energy (both heat and cold) for later use as required, rather than at the time of production. They are therefore important counterparts to various intermittent renewable energy generation methods and also provide a way of valorising waste process heat and reducing the energy demand of buildings. This book provides an authoritative overview of this key area. Part one reviews sensible heat storage technologies. Part two covers latent and thermochemical heat storage respectively. The final section addresses applications in heating and energy systems. - Reviews sensible heat storage technologies, including the use of water, molten salts, concrete and boreholes - Describes latent heat storage systems and thermochemical heat storage - Includes information on the monitoring and control of thermal energy storage systems, and considers their applications in residential buildings, power plants and industry




Solar Hybrid Systems


Book Description

Solar Hybrid Systems: Design and Application discusses the key power generation characteristics of solar systems and explores the growing need for hybrid systems. The authors use real-life examples to explain the disadvantages of solar systems without hybridization and to demonstrate the various applications hybrid solar systems can be used for, paying special attention to its integration with energy storage systems. The book also discusses the impact of hybridization and how this can improve power generation quality along with investigating novel and advanced hybrid solar systems. This is a useful reference for engineers and researchers involved in both the development and application of hybrid solar systems, and features topics such as solutions for the intermittence of renewable energy sources; on-gird and off-grid solar hybrid systems; the simulation, design and application of hybrid solar systems; the role of energy storage systems in solar hybrid applications; and the future of electric vehicles using solar hybrid systems. - Demonstrates the benefits of hybrid solar systems and why they are needed - Features practical advice on designing hybrid solar systems - Includes key findings and real-world examples to illustrate the applications of hybrid solar systems




Concentrating Solar Power Technology


Book Description

Concentrating solar power (CSP) technology is poised to take its place as one of the major contributors to the future clean energy mix. Using straightforward manufacturing processes, CSP technology capitalises on conventional power generation cycles, whilst cost effectively matching supply and demand though the integration of thermal energy storage. Concentrating solar power technology provides a comprehensive review of this exciting technology, from the fundamental science to systems design, development and applications.Part one introduces fundamental principles of concentrating solar power systems. Site selection and feasibility analysis are discussed, alongside socio-economic and environmental assessments. Part two focuses on technologies including linear Fresnel reflector technology, parabolic-trough, central tower and parabolic dish concentrating solar power systems, and concentrating photovoltaic systems. Thermal energy storage, hybridization with fossil fuel power plants and the long-term market potential of CSP technology are explored. Part three goes on to discuss optimisation, improvements and applications. Topics discussed include absorber materials for solar thermal receivers, design optimisation through integrated techno-economic modelling, heliostat size optimisation, heat flux and temperature measurement technologies, concentrating solar heating and cooling for industrial processes, and solar fuels and industrial solar chemistry.With its distinguished editors and international team of expert contributors, Concentrating solar power technology is an essential guide for all those involved or interested in the design, production, development, optimisation and application of CSP technology, including renewable energy engineers and consultants, environmental governmental departments, solar thermal equipment manufacturers, researchers and academics. - Provides a comprehensive review of concentrating solar power (CSP) technology, from the fundamental science to systems design, development and applications - Reviews fundamental principles of concentrating solar power systems, including site selection and feasibility analysis and socio-economic and environmental assessments - Provides an overview of technologies such as linear Fresnel reflector technology, parabolic-trough, central tower and parabolic dish concentrating solar power systems, and concentrating photovoltaic systems




Energy Storage Devices


Book Description

Energy storage will be a very important part of the near future, and its effectiveness will be crucial for most future technologies. Energy can be stored in several different ways and these differ in terms of the type and the conversion method of the energy. Among those methods; chemical, mechanical, and thermal energy storage are some of the most favorable methods for containing energy. Current energy storage devices are still far from meeting the demands of new technological developments. Therefore, much effort has been put to improving the performance of different types of energy storage technologies in the last few decades.




Solar Energy Utilization


Book Description

Until very recently, energy supply of the world has been treated as being nearly inexhaustible. Nowadays about 90 percent of the energy used is obtained from non-renewable resources: oil, natural gas, coal and uranium. These resources are being used up at an alarming rate. To meet our demands we are now searching for new sources of energy. One of these new sources of energy is solar energy which will assume increasing importance. It is free but means must be developed to use it economically. Research is actively under way to reduce the storage cost of this low intensity energy and for the design of economical systems. The purpose of this Institute is to provide an international forum for the dissemination of information on solar energy utilization: fundamentals and applications in industry. This meeting is primarily a high level teaching activity. The subject is treated in considerable depth by lecturers eminent in their field. The other participants include scientists, engineers, and senior graduate students who themselves are involved in a similar research and who wish to learn more about current developments, as well as scientists from other areas who are planning to research on solar energy. The lectures are supplemented by informal discussions designed to encourage the free and critical exchange of ideas. A limited number of contributions are also included. This volume contains both basic and applied information contributed during the Institute. The editors appreciate the cooperation of Martinus Nijhoff Publishezsin making the proceedings widely available.




Thermal Energy Storage Technologies for Sustainability


Book Description

Thermal Energy Storage Technologies for Sustainability is a broad-based overview describing the state-of-the-art in latent, sensible, and thermo-chemical energy storage systems and their applications across industries. Beginning with a discussion of the efficiency and conservation advantages of balancing energy demand with production, the book goes on to describe current state-of-the art technologies. Not stopping with description, the authors also discuss design, modeling, and simulation of representative systems, and end with several case studies of systems in use. - Describes how thermal energy storage helps bridge the gap between energy demand and supply, particularly for intermittent power sources like solar, wind, and tidal systems - Provides tables, illustrations, and comparative case studies that show applications of TES systems across industries - Includes a chapter on the rapidly developing field of viable nanotechnology-based thermal energy storage systems




Handbook on Battery Energy Storage System


Book Description

This handbook serves as a guide to deploying battery energy storage technologies, specifically for distributed energy resources and flexibility resources. Battery energy storage technology is the most promising, rapidly developed technology as it provides higher efficiency and ease of control. With energy transition through decarbonization and decentralization, energy storage plays a significant role to enhance grid efficiency by alleviating volatility from demand and supply. Energy storage also contributes to the grid integration of renewable energy and promotion of microgrid.




Advances in Concentrating Solar Thermal Research and Technology


Book Description

After decades of research and development, concentrating solar thermal (CST) power plants (also known as concentrating solar power (CSP) and as Solar Thermal Electricity or STE systems) are now starting to be widely commercialized. Indeed, the IEA predicts that by 2050, with sufficient support over ten percent of global electricity could be produced by concentrating solar thermal power plants. However, CSP plants are just but one of the many possible applications of CST systems. Advances in Concentrating Solar Thermal Research and Technology provides detailed information on the latest advances in CST systems research and technology. It promotes a deep understanding of the challenges the different CST technologies are confronted with, of the research that is taking place worldwide to address those challenges, and of the impact that the innovation that this research is fostering could have on the emergence of new CST components and concepts. It is anticipated that these developments will substantially increase the cost-competiveness of commercial CST solutions and reshape the technological landscape of both CST technologies and the CST industry. After an introductory chapter, the next three parts of the book focus on key CST plant components, from mirrors and receivers to thermal storage. The final two parts of the book address operation and control and innovative CST system concepts. - Contains authoritative reviews of CST research taking place around the world - Discusses the impact this research is fostering on the emergence of new CST components and concepts that will substantially increase the cost-competitiveness of CST power - Covers both major CST plant components and system-wide issues




Renewable Heating and Cooling


Book Description

Renewable Heating and Cooling: Technologies and Applications presents the latest information on the generation of heat for industry and domestic purposes, an area where a significant proportion of total energy is consumed. In Europe, this figure is estimated to be almost 50%, with the majority of heat generated by the consumption of fossil fuels. As there is a pressing need to increase the uptake of renewable heating and cooling (RHC) to reduce greenhouse gas emissions, this book provides a comprehensive and authoritative overview on the topic. Part One introduces key RHC technologies and discusses RHC in the context of global heating and cooling demand, featuring chapters on solar thermal process heat generation, deep geothermal energy, and solar cooling technologies. Part Two explores enabling technologies, special applications, and case studies with detailed coverage of thermal energy storage, hybrid systems, and renewable heating for RHC, along with case studies in China and Sweden. Users will find this book to be an essential resource for lead engineers and engineering consultants working on renewable heating and cooling in engineering companies, as well as academics and R&D professionals in private research institutes who have a particular interest in the subject matter. - Includes coverage on biomass, solar thermal, and geothermal renewable heating and cooling technologies - Features chapters on solar thermal process heat generation, deep geothermal energy, solar cooling technologies, and special applications - Presents case studies with detailed coverage of thermal energy storage, hybrid systems, and renewable heating for RHC - Explores enabling technologies and special applications