Optical Radiation Measurement with Selected Detectors and Matched Electronic Circuits Between 200 NM and 20 Μm (Classic Reprint)


Book Description

Excerpt from Optical Radiation Measurement With Selected Detectors and Matched Electronic Circuits Between 200 Nm and 20 Μm Improved detector technology in the past decade opened a new era in the field of radiometric and photometric calibrations. Now, cryogenic electrical substitution radiometers with optical power measurement uncertainty are the primary standards of the field. New generation radiometers, built with high electronic and radiometric performance detectors, became the transfer and working standards to propagate the high accuracy from the primary standard to field level measurements. The importance of high quality detector standards has greatly increased as a result of demands in a wide range of technical areas. Nowadays, lamp standards, traditionally calibrated against source standards, are calibrated against detector standards to obtain improved calibration accuracy. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.













The Properties of Optical Radiation Detectors and Radiometers


Book Description

This is the first book to investigate the improved performance of optical radiation detectors developed from the ultraviolet to the far-infrared in the past two decades. The development and applications of these improved detectors opened up a new era in radiometric, photometric, colorimetric, and radiation-temperature measurements where earlier blackbody sources and lamps were used with lower performance and in limited application areas. This book will serve to help students, practicing scientists, engineers, technicians, and instrument manufacturers to learn, compare and select the proper detectors for building, using, and calibrating opto-electronic instruments with SI traceability and lowered measurement uncertainty in extended application areas.




Optical Detector and Radiometer Standards


Book Description

This book discusses modern, user-friendly radiometric practices that make it possible to convert from traditional source-based optical radiation measurements to the more efficient and higher accuracy detector-based applications and calibrations. It considers improved performance optical detector and radiometer standards including photometers and tristimulus colorimeters, and describes research-based design considerations, measurement of radiometric, optical, and electronic characteristics, and comparison of absolute-, transfer-, and working-standard detectors and radiometers from the ultraviolet (UV) to the infrared (IR) range. The book will serve to guide the optical radiation measurement community, researchers, manufacturers, calibration laboratories, students, and practicing engineers to switch from the old and limited-use measurement methods to the higher performance detector-based applications. The radiometer standards discussed here can be used to produce wide range radiometric, photometric, colour, and radiation temperature measurements with low uncertainty.




Optical Detector Applications for Radiometric Measurements


Book Description

The recently developed optical radiation detectors need well-designed radiometers to perform improved radiometric, photometric, colorimetric, and radiation-temperature measurements. They can produce higher performance than traditionally used blackbody sources and lamps in wider application areas. This book presents research-based material in this field that has been implemented, realized, tested, verified, and evaluated. It can be used as a reference source for students, practicing scientists, engineers, technicians, instrument manufacturers and measurement/calibration people to learn, design, build, select, and use new generation radiometers. The book describes a number of design issues and applications to implement the correct input geometry for detectors to measure radiometric (power, irradiance and radiance) quantities, and DC, AC, and pulsed electrical output signals.




Radiometry and the Detection of Optical Radiation


Book Description

Presents a treatment of fundamental aspects of the generation, transfer and detection of optical and infra-red radiation. Emphasis placed on practical aspects of radiometry in detection. Discusses formal principles of radiometry, signal-to-noise considerations in the detection of optical radiation, and the operation of various radiation detectors. Includes tables and graphs of blackbody functions.




Optical Radiation Detectors


Book Description

Optical Radiation Detectors, Eustace L. Dereniak and Devon G.Crowe Offers a comprehensive, integrated treatment of optical radiationdetectors, discussing their capabilities and limitations.Background material on radiometry, noise sources, and detectorphysics is introduced, followed by more detailed discussions ofphoton detectors, thermal detectors, and charge transfer arrays ofdetectors.