Plasma Surface Metallurgy


Book Description

This book provides a comprehensive introduction to and technical description of a unique patented surface-modification technology: plasma surface metallurgy with double-glow discharge plasma process, known as the Xu-Tec process. As such it promotes further attention and interest in scientific research and engineering development in this area, as well as industrial utilization and product commercialization. The Xu-Tec process has opened up a new material engineering field of “Plasma Surface Metallurgy”. This surface-modification process can transform many low-grade and low-cost industrial engineering materials into “gold” materials with a high value and high grade or special functions. This improved material can be widely used in industrial production to improve the surface performance and quality of mechanical parts and manufacturing products, and to conserve expensive alloying elements for the benefit of all mankind. “This book will be valuable to those in the general area of surface metallurgy. The substantial description of the Xu-Tec process is very important and should assist in expanding the use of this superior technique. The in-depth explanation of glow discharges and their use in general will also serve as a valuable reference in the field.” James E. Thompson, Prof. Fellow of the IEEE Dean of Engineering Emeritus University of Missouri, Columbia, Missouri, USA November, 2016 "A BREAKTHROUGH IN MAKING METAL TOUGHER". ---- SCIENCE & TECHNOLOGY Business Week, July 24, 1989 “NOVEL SURFACE ALLOYING PROCESS” --- THE LEADING EDGE TECHNOLOGY WORDWIDE Materials and Processing Report, Dec. 1987




Plasma Surface Metallurgy


Book Description




Spark Plasma Sintering of Materials


Book Description

This book describes spark plasma sintering (SPS) in depth. It addresses fundamentals and material-specific considerations, techniques, and applications across a broad spectrum of materials. The book highlights methods used to consolidate metallic or ceramic particles in very short times. It highlights the production of complex alloys and metal matrix composites with enhanced mechanical and wear properties. Emphasis is placed on the speed of the sintering processes, uniformity in product microstructure and properties, reduced grain growth, the compaction and sintering of materials in one processing step, various materials processing, and high energy efficiency. Current and potential applications in space science and aeronautics, automation, mechanical engineering, and biomedicine are addressed throughout the book.




Indian Metallurgy


Book Description

The book marks the Platinum Jubilee of the Indian Institute of Metals, closely matching independent India's age. It is envisaged as a compilation of technical articles tracing the birth and growth trajectory of metallurgical science, engineering and technology in the nation, attempting a degree of prognostication covering the next quarter of a century. It contains the essence of the metallurgical research and development and industrial progress India has witnessed in the last 75 years. This book comprises technical articles written by industry leaders and eminent technocrats. It includes overviews by distinguished researchers who have strived to build foundations of new metallurgical research and engineering fields. It includes learned writings of persons associated with premier institutions heavily dependent on metallurgy and materials. They have made seminal contributions by nurturing the growth of metallurgical research and industrial production or have made first-hand contributions to building the great organisations we have today. Coinciding with the Platinum Jubilee year of the Indian Institute of Metals, this book brings out the enormous efforts of these individuals representing their organisations to share insights that led to their success as an entity. Similarly, several professionals who significantly contributed to the understanding of metallurgical engineering, have held important positions and steered the national strategic programmes or academically nurtured students in their illustrious careers also share their journey in this book. This book chronicles the significant advances made in the field of metallurgical science, engineering and technology in India, presenting the historical perspective and prospects in the format of a technical volume.




Advanced Materials and Structural Engineering


Book Description

The ICAMEST 2015 Conference covered new developments in advanced materials and engineering structural technology. Applications in civil, mechanical, industrial and material science are covered in this book. Providing high-quality, scholarly research, addressing developments, applications and implications in the field of structural health monitoring, construction safety and management, sensors and measurements. This volume contains new models for nonlinear structural analysis and applications of modeling identification. Furthermore, advanced chemical materials are discussed with applications in mechanical and civil engineering and for the maintenance of new materials. In addition, a new system of pressure regulating and water conveyance based on small and middle hydropower stations is discussed. An experimental investigation of the ultimate strength and behavior of the three types of steel tubular K-joints was presented. Furthermore, real-time and frequency linear and nonlinear modeling performance of materials of structures contents were concluded with the notion of a fully brittle material, and this approach is implemented in the book by outlining a finite-element method for the prediction of the construction performance and cracking patterns of arbitrary structural concrete forms. This book is an ideal reference for practicing engineers in material, mechanical and civil engineering and consultants (design, construction, maintenance), and can also be used as a reference for students in mechanical and civil engineering courses.




Metallurgical Coatings and Thin Films 1990


Book Description

Metallurgical Coatings and Thin Films 1990 presents the Proceedings of the 17th International Conference on Metallurgical Coatings and 8th International Conference on Thin Films, held in San Diego, California on April 2-6, 1990. It contains 219 papers covering a wide range of topics related to metallurgical coatings and thin films, including high temperature coatings, hard coatings, diamond films, tribology, and ion beam modification. Organized into 99 chapters, this volume begins with a discussion of a thermochemical model for diamond growth from the vapor phase and an experiment in large area diamond coating using a combustion flame torch in its traversing mode. It then explores the properties of diamond films, preparation of diamond-like carbon films using various ion-beam-assisted techniques, deposition of diamond-like films by laser ablation, and coating of cubic BN films on different substrates. The book examines surface processes and rate-determining steps in plasma-induced chemical vapor deposition, and addition of rare earths to improve scale adherence on heat-resisting alloys and coatings. The reader is introduced to high temperature wear and clearance control coatings, thermal barrier coatings, and corrosion resistant coatings. The book also discusses modification of coatings/surfaces to reduce friction; the mechanics of the tribology of thin films systems; mechanochemical interactions in the tribological behavior of materials; analysis and micromechanical testing of tribological coatings; surface modification using directed ion beams; and industrial equipment and processes. This book is a valuable resource for students and researchers interested in metallurgical coatings and thin films.




Materials Processing Technology II


Book Description

Selected, peer reviewed papers from the 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012), July 6-8, 2012, Zhuhai, China




Encyclopedia of Iron, Steel, and Their Alloys (Online Version)


Book Description

The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]




Innovations in Materials Chemistry, Physics, and Engineering Research


Book Description

Innovations in Materials Chemistry, Physics, and Engineering Research is an all-encompassing book edited by Eugene de Silva, the Head of Multi-disciplinary Research in Applied Science (MRAS), and Pramudi Abeydeera, a prominent figure in polymer chemistry. The book explores the latest research and innovations in materials chemistry, physics, engineering, and other related areas. It seeks to inform researchers, policymakers, and the wider public about the most recent theoretical and experimental research in the field. The book covers many topics, including the fundamental mechanisms of reactions, applications, synthesis, properties, and innovations in materials chemistry. It also contains critical reviews of past and current research, which provides the reader with a comprehensive understanding of the subject matter. By doing so, the book promotes collaborative research by facilitating the sharing of information and directing research toward new avenues in research and industrial development. It is an indispensable resource for universities, colleges, research centers, and industries. This book is particularly relevant for polymer scientists who find the latest research on materials chemistry, physics, engineering, and allied fields beneficial for their research endeavors.




Powder Metallurgy


Book Description

The book presents the fundamentals and the role of powder metallurgy in contemporary technologies and the state of the art of classical powder metallurgy technologies and a general description of new variants and special and hybrid technologies used in powder metallurgy. The next part includes over a dozen case studies provided in the following chapters, comprehensively describing authors' accomplishments of numerous teams from different countries across the world in advanced research areas relating to powder metallurgy and to special and hybrid technologies. The detailed information, largely deriving from own and original research and R