Practical Design of Ships and Other Floating Structures


Book Description

This proceedings contains the papers presented at The 8th International Symposium on Practical Design of Ships and Other Floating Structures held in China in September 2001 - the first PRADS of the 21st Century. The overall aim of PRADS symposia is to advance the design of ships and other floating structures as a professional discipline and science by exchanging knowledge and promoting discussion of relevant topics in the fields of naval architecture and marine and offshore engineering. In line with the aim, in welcoming the new era, this Symposium is intended to increase international co-operation and give a momentum for the new development of design and production technology of ships and other floating structures for efficiency, economy, safety, and environmental production. The main themes of this Symposium are Design Synthesis, Production, Hydrodynamics, Structures and Materials of Ships and Floating Systems. Proposals for over 270 papers from 26 countries and regions within the themes were received for PRADS 2001, and about 170 papers were accepted for presentation at the symposium. With the high quality of the proposed papers the Local Organising Committee had a difficult task to make a balanced selection and to control the total number of papers for fitting into the allocated time schedule approved by the Standing Committee of PRADS. Volume I covers design synthesis, production and part of hydrodynamics. Volume II contains the rest of hydrodynamics, and structures and materials.




Practical Design of Ships and Mobile Units


Book Description

These proceedings contain the papers presented at the 7th International Symposium on Practical Design of Ships and Mobile Units. The symposium was held at the Congress Centre in The Hague, The Netherlands on 20-25 September, 1998.The overall aim of PRADS conferences is to advance the design of ships and mobile marine structures through the exchange of knowledge and the promotion of discussions on relevant topics in the fields of naval architecture and marine and offshore engineering. Greater international co-operation of this kind can help improve design and production methods and so increase the efficiency, economy and safety of ships and mobile units. The main themes of this symposium are design synthesis, production, ship hydromechanics, ship structures and materials and offshore engineering. Some topics which attracted many papers were design loads, design for ultimate strength, impact of safety and environment, grounding and collision, resistance and flow, seakeeping, fatigue considerations and propulsor and propulsion systems.




Practical Design of Ships and Other Floating Structures


Book Description

This book gathers the peer-reviewed proceedings of the 14th International Symposium, PRADS 2019, held in Yokohama, Japan, in September 2019. It brings together naval architects, engineers, academic researchers and professionals who are involved in ships and other floating structures to share the latest research advances in the field. The contents cover a broad range of topics, including design synthesis for ships and floating systems, production, hydrodynamics, and structures and materials. Reflecting the latest advances, the book will be of interest to researchers and practitioners alike.







Design of Contemporary Inland Waterway Vessels


Book Description

Inland Waterway (IW), or river vessels are in every respect different from the seagoing ships. The professional literature is mostly focused on conventional seagoing fleets, leaving a gap in the documentation of design practices for IW vessels. The principal attribute that differentiates river vessels from the seagoing ships is the low, or shallow, draught due to water depth restrictions. This book addresses key aspects for the design of contemporary, shallow draught IW vessels for the transport of dry cargo (containers and bulk cargo). Most of the logic that is presented is applicable to the design of river vessels for any river, but the material that is presented is focused on vessels for the River Danube and its tributaries. The term ‘contemporary river vessel’ assumes that the present-day technology and current Danube river infrastructure are taken into consideration in its design. It is believed that the technologies and concepts that are proposed here are applicable for all new vessel designs for the next 10 to 15 years. Other innovative technologies should be considered for designs beyond that horizon. Moreover, nowadays contemporary IW vessel must be in harmony with the Environmentally Sustainable Transport (EST) policies and hence special attention is paid to both ecology and efficiency. Note however that shipowners and ship operators usually tend to choose the conventional cost-effective transport technologies. Given that potential divergence of interests, the concepts and technologies treated here may be regarded as innovative.




A Holistic Approach to Ship Design


Book Description

This book introduces a holistic approach to ship design and its optimisation for life-cycle operation. It deals with the scientific background of the adopted approach and the associated synthesis model, which follows modern computer aided engineering (CAE) procedures. It integrates techno-economic databases, calculation and multi-objective optimisation modules and s/w tools with a well-established Computer-Aided Design (CAD) platform, along with a Virtual Vessel Framework (VVF), which will allow virtual testing before the building phase of a new vessel. The resulting graphic user interface (GUI) and information exchange systems enable the exploration of the huge design space to a much larger extent and in less time than is currently possible, thus leading to new insights and promising new design alternatives. The book not only covers the various stages of the design of the main ship system, but also addresses relevant major onboard systems/components in terms of life-cycle performance to offer readers a better understanding of suitable outfitting details, which is a key aspect when it comes the outfitting-intensive products of international shipyards. The book disseminates results of the EU funded Horizon 2020 project HOLISHIP.




Advanced Ship Design for Pollution Prevention


Book Description

Advanced Ship Design for Pollution Prevention is a collection of papers reflecting the teaching materials for a Master of Naval Architecture course developed in the European ASDEPP (Advanced Ship Design for Pollution Prevention) project. The project was financed by the European Commission within the TEMPUS program.The topics covered in the book inc




Transactions of JWRI.


Book Description




Developments in the Analysis and Design of Marine Structures


Book Description

Developments in the Analysis and Design of Marine Structures is a collection of papers presented at MARSTRUCT 2021, the 8th International Conference on Marine Structures (by remote transmission, 7-9 June 2021, organised by the Department of Marine Technology of the Norwegian University of Science and Technology, Trondheim, Norway), and is essential reading for academics, engineers and professionals involved in the design of marine and offshore structures. The MARSTRUCT Conference series deals with Ship and Offshore Structures, addressing topics in the fields of: - Methods and Tools for Loads and Load Effects; - Methods and Tools for Strength Assessment; - Experimental Analysis of Structures; - Materials and Fabrication of Structures; - Methods and Tools for Structural Design and Optimisation; and - Structural Reliability, Safety and Environmental Protection. The MARSTRUCT conferences series of started in Glasgow, UK in 2007, the second event of the series took place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, the fifth in Southampton, UK in March 2015, the sixth in Lisbon, Portugal in May 2017, and the seventh in Drubovnik, Croatia in May 2019. The ‘Proceedings in Marine Technology and Ocean Engineering’ series is dedicated to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of ‘Marine Technology and Ocean Engineering’. The Series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) conferences, the Marine Structures (MARSTRUCT) conferences, the Renewable Energies Offshore (RENEW) conferences and the Maritime Technology (MARTECH) conferences. The ‘Marine Technology and Ocean Engineering’ series is also open to new conferences that cover topics on the sustainable exploration and exploitation of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and its resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.




Annual Report


Book Description