Alternatives to Chromated Copper Arsenate for Residential Construction


Book Description

For decades chromated copper arsenate (CCA) was the primary preservative for treated wood used in residential construction. However, recent label changes submitted by CCA registrants will withdraw CCA from most residential applications. This action has increased interest in arsenic free preservative systems that have been standardized by the American Wood Preservers? Association. These include acid copper chromate (ACC), alkaline copper quat (ACQ), copper azole (CBA-A and CA-B), copper citrate (CC), copper dimethyldithio-carbamate (CDDC), and copper HDO (CX-A). All of these CCA alternatives rely on copper as their primary biocide, although some have co-biocides to help prevent attack by copper-tolerant fungi. These alternative treatments have appearance and handling properties‍?similar to those of CCA and are likely to be readily accepted by consumers. Prior studies indicate that these treatments release preservative components into the environment at a rate greater than or equal to that of CCA, but because their components have lower mammalian toxicity they are less likely to cause concern in residential applications. As the treated wood industry evolves, it is probable that a wider range of types and retentions of wood preservatives will become available, with the treatment more closely tailored to a specific type of construction application.




Nondestructive Evaluation of Wood


Book Description

Nature's engineering of wood through genetics, wind, and weather creates a wide variability in wood as a material. Consequently, manufacture and users of wood products are frequently frustrated in dealing with the forest resource. Manufacturers sometimes argue that wood is difficult to consistently process into quality products because of the wide range of properties that exist in this raw material. Users of wood products can be equally frustrated with the performance variability found in finished products. Nondestructive evaluation (NDE) technologies have contributed significantly toward eliminating the cause of these frustrations. NDE technologies have been developed and are currently used in lumber and veneer grading programs that result in engineered materials that have consistent well-defined performance characteristics. This brief volume explores some of the processes that are used to manufacture wood, including green wood technology and provides a bit of history to wood production and its uses too. Other products that may interest you from the US Forest Service can be found at this link: https://bookstore.gpo.gov/agency/819




Investment opportunity


Book Description







Nondestructive Methods of Evaluating Quality of Wood in Preservative-treated Piles


Book Description

Stress-wave-based nondestructive evaluation methods were used to evaluate the potential quality and modulus of elasticity (MOE) of wood in used preservative-treated Douglas-fir and southern pine piles. Stress wave measurements were conducted on each pile section. Stress wave propagation speeds in the piles were then obtained to estimate their MOE. This was followed by a sequence of tests conducted on octagon-shaped cants, on boards, and on small, clear wood specimens obtained from the piles. Statistical regression analyses revealed a strong correlation between the stress-wave-based MOE (MOEd) of piles and octagons and the corresponding flexural properties of boards and small, clear wood specimens determined by transverse vibration and static bending techniques, respectively. The results also indicated that used preservative-treated wood piles still contain material that has potential for use in exterior structural applications.




Wood Handbook


Book Description