Protection of Materials and Structures From the Space Environment


Book Description

The goals of the 10th International Space Conference on “Protection of Materials and Structures from Space Environment” ICPMSE-10J, since its inception in 1992, have been to facilitate exchanges between members of the various engineering and science disciplines involved in the development of space materials, including aspects of LEO, GEO and Deep Space environments, ground-based qualification, and in-flight experiments and lessons learned from operational vehicles that are closely interrelated to disciplines of the atmospheric sciences, solar-terrestrial interactions and space life sciences. The knowledge of environmental conditions on and around the Moon, Mars, Venus and the low Earth orbit as well as other possible candidates for landing such as asteroids have become an important issue, and protecting both hardware and human life from the effects of space environments has taken on a new meaning in light of the increased interest in space travel and colonization of other planets. And while many material experiments have been carried out on the ground and in open space in the last 50 years (LDEF, MEEP, SARE, MISSE, AOP, DSPSE, ESEM, EURECA, HST, MDIM, MIS, MPID, MPAC and SEED), many questions regarding the environmental impact of space on materials remain either poorly understood or unanswered. The coming generations of scientists will have to continue this work and tackle new challenges, continuing to build the level of confidence humans will need to continue the colonization of space. It is hoped that the proceedings of the ICPMSE-10J presented in this book will constitute a small contribution to doing so.




Protection of Materials and Structures from Space Environment


Book Description

The conference proceedings are discussing the latest developments in the area of the effects of the space environment on materials and structures and the ways to prevent and/or reduce them. The effects of various space environment factors like atomic oxygen, vacuum ultraviolet radiation, charging, micrometeoroids, meteoroid showers, etc. on materials and structures in various space conditions are discussed. In addition the ways to prevent these effects or reduce them through protection by coatings or modification of affected surfaces are considered in the book. The discussions on development of predictive models of material erosion that will allow the materials engineers and designers of future spacecraft to evaluate materials' behavior is continued from the past meetings.




Safety Design for Space Systems


Book Description

The lack of widespread education in space safety engineering and management has profound effects on project team effectiveness in integrating safety during design. On one side, it slows down the professional development of junior safety engineers, while on the other side it creates a sectarian attitude that isolates safety engineers from the rest of the project team. To speed up professional development, bridge the gap within the team, and prevent hampered communication and missed feedback, the entire project team needs to acquire and develop a shared culture of space safety principles and techniques.The second edition of Safety Design for Space Systems continues to address these issues with substantial updates to chapters such as battery safety, life support systems, robotic systems safety, and fire safety. This book also features new chapters on crew survivability design and nuclear space systems safety. Finally, the discussion of human rating concepts, safety-by-design principles, and safety management practices have also been revised and improved. With contributions from leading experts worldwide, this second edition represents an essential educational resource and reference tool for engineers and managers working on space projects. - Provides basic multidisciplinary knowledge on space systems safety design - Addresses how space safety engineering and management can be implemented in practice - Includes new chapters on crew survivability design and nuclear space systems safety - Fully revised and updated to reflect the latest developments in the field




Safety Design for Space Systems


Book Description

Progress in space safety lies in the acceptance of safety design and engineering as an integral part of the design and implementation process for new space systems. Safety must be seen as the principle design driver of utmost importance from the outset of the design process, which is only achieved through a culture change that moves all stakeholders toward front-end loaded safety concepts. This approach entails a common understanding and mastering of basic principles of safety design for space systems at all levels of the program organisation. Fully supported by the International Association for the Advancement of Space Safety (IAASS), written by the leading figures in the industry, with frontline experience from projects ranging from the Apollo missions, Skylab, the Space Shuttle and the International Space Station, this book provides a comprehensive reference for aerospace engineers in industry. It addresses each of the key elements that impact on space systems safety, including: the space environment (natural and induced); human physiology in space; human rating factors; emergency capabilities; launch propellants and oxidizer systems; life support systems; battery and fuel cell safety; nuclear power generators (NPG) safety; habitat activities; fire protection; safety-critical software development; collision avoidance systems design; operations and on-orbit maintenance. - The only comprehensive space systems safety reference, its must-have status within space agencies and suppliers, technical and aerospace libraries is practically guaranteed - Written by the leading figures in the industry from NASA, ESA, JAXA, (et cetera), with frontline experience from projects ranging from the Apollo missions, Skylab, the Space Shuttle, small and large satellite systems, and the International Space Station - Superb quality information for engineers, programme managers, suppliers and aerospace technologists; fully supported by the IAASS (International Association for the Advancement of Space Safety)




Dynamic Processes in Solids


Book Description

The results obtained from kinetic studies on reactions in solids often depend on numerous factors. Therefore, it is important for researchers to understand how both chemical factors related to composition and procedural choices may influence outcomes. Dynamic Processes in Solids provides an authoritative overview of reactions in solids and helps readers interpret the results obtained from kinetic studies. In chapters written by active researchers, the reader will learn about choosing appropriate experimental techniques and their limitations for studying various types of reactions. Beginning with an introduction to numerous aspects of rate processes in solids and experimental techniques, information is provided on rate laws, factors affecting rates, diffusion, and sintering. Subsequent chapters deal with electrical conductivity in dispersed phase polymers, thermochemical reactions for producing solid materials, reactions in coordination compounds, dynamic observations on plastic deformation, light driven phenomena in quantum materials, decomposition of perovskite photovoltaic compounds, and reaction of oxygen radicals with surfaces. This book is a practical introduction to the field for chemists and researchers whose work is directly related to dynamic changes in solids, and additionally for those in related fields whose work would be enhanced by an understanding of these types of rate processes. - Presents useful discussions of the applications of several experimental techniques - Describes approaches for synthesis of solid materials by thermochemical reactions - Presents theoretical interpretation structural dynamics and processes at the molecular level in solids - Provides information on the relationships between performance and rate processes in several types of materials related to electronic behavior




High Temperature Polymer Blends


Book Description

Polymer blends offer properties not easily obtained through the use of a single polymer, including the ability to withstand high temperatures. High Temperature Polymer Blends outlines the characteristics, developments, and use of high temperature polymer blends. The first chapter introduces high temperature polymer blends, their general principles, and thermodynamics. Further chapters go on to deal with the characterization of high temperature polymer blends for specific uses, such as fuel cells and aerospace applications. The book discusses different types of high temperature polymer blends, including liquid crystal polymers, polysulfones, and polybenzimidazole polymer blends and their commercial applications. High Temperature Polymer Blends provides a key reference for material scientists, polymer scientists, chemists, and plastic engineers, as well as academics in these fields. - Reviews characterization methods and analysis of the thermodynamic properties of high temperature polymer blends - Reviews the use of materials such as liquid crystals as reinforcements as well as applications in such areas as energy and aerospace engineering







Index of Conference Proceedings


Book Description