Produced Water


Book Description

This book represents the proceedings of the first major international meeting dedi cated to discuss environmental aspects of produced water. The 1992 International Pro duced Water Symposium was held at the Catamaran Hotel, San Diego, California, USA, on February 4-7, 1992. The objectives of the conference were to provide a forum where scientists, regulators, industry, academia, and the enviromental community could gather to hear and discuss the latest information related to the environmental considerations of produced water discharges. It was also an objective to provide a forum for the peer review and international publication of the symposium papers so that they would have wide availability to all parties interested in produced water environmental issues. Produced water is the largest volume waste stream from oil and gas production activities. Onshore, well over 90% is reinjected to subsurface formations. Offshore, and in the coastal zone, most produced water is discharged to the ocean. Over the past several years there has been increasing concern from regulators and the environmental commu nity. There has been a quest for more information on the composition, treatment systems and chemicals, discharge characteristics, disposal options, and fate and effects of the produced water. As so often happens, much of this information exists in the forms of reports and internal research papers. This symposium and publication was intended to make this information available, both for open discussion at the conference, and for peer review before publication.




Hydraulic Fracturing for Oil and Gas


Book Description

This final report provides a review and synthesis of available scientific information concerning the relationship between hydraulic fracturing activities and drinking water resources in the United States. The report is organized around activities in the hydraulic fracturing water cycle and their potential to impact drinking water resources. The stages include: (1) acquiring water to be used for hydraulic fracturing (Water Acquisition), (2) mixing the water with chemical additives to prepare hydraulic fracturing fluids (Chemical Mixing), (3) injecting the hydraulic fracturing fluids into the production well to create fractures in the targeted production zone (Well Injection), (4) collecting the wastewater that returns through the well after injection (Produced Water Handling), and (5) managing the wastewater via disposal or reuse methods (Wastewater Disposal and Reuse). EPA found scientific evidence that hydraulic fracturing activities can impact drinking water resources under some circumstances. The report identifies certain conditions under which impacts from hydraulic fracturing activities can be more frequent or severe.




Management and Effects of Coalbed Methane Produced Water in the Western United States


Book Description

In some coalbeds, naturally occurring water pressure holds methane-the main component of natural gas-fixed to coal surfaces and within the coal. In a coalbed methane (CBM) well, pumping water from the coalbeds lowers this pressure, facilitating the release of methane from the coal for extraction and use as an energy source. Water pumped from coalbeds during this process-CBM 'produced water'-is managed through some combination of treatment, disposal, storage, or use, subject to compliance with federal and state regulations. CBM produced water management can be challenging for regulatory agencies, CBM well operators, water treatment companies, policy makers, landowners, and the public because of differences in the quality and quantity of produced water; available infrastructure; costs to treat, store, and transport produced water; and states' legal consideration of water and produced water. Some states consider produced water as waste, whereas others consider it a beneficial byproduct of methane production. Thus, although current technologies allow CBM produced water to be treated to any desired water quality, the majority of CBM produced water is presently being disposed of at least cost rather than put to beneficial use. This book specifically examines the Powder River, San Juan, Raton, Piceance, and Uinta CBM basins in the states of Montana, Wyoming, Colorado, New Mexico, and Utah. The conclusions and recommendations identify gaps in data and information, potential beneficial uses of CBM produced water and associated costs, and challenges in the existing regulatory framework.




Environmental Aspects of Oil and Gas Production


Book Description

Oil and gas still power the bulk of our world, from automobiles and the power plants that supply electricity to our homes and businesses, to jet fuel, plastics, and many other products that enrich our lives. With the relatively recent development of hydraulic fracturing ("fracking"), multilateral, directional, and underbalanced drilling, and enhanced oil recovery, oil and gas production is more important and efficient than ever before. Along with these advancements, as with any new engineering process or technology, come challenges, many of them environmental. More than just a text that outlines the environmental challenges of oil and gas production that have always been there, such as gas migration and corrosion, this groundbreaking new volume takes on the most up-to-date processes and technologies involved in this field. Filled with dozens of case studies and examples, the authors, two of the most well-known and respected petroleum engineers in the world, have outlined all of the major environmental aspects of oil and gas production and how to navigate them, achieving a more efficient, effective, and profitable operation. This groundbreaking volume is a must-have for any petroleum engineer working in the field, and for students and faculty in petroleum engineering departments worldwide.




Water for Energy and Fuel Production


Book Description

This text describes water's use in the production of raw fuels, as an energy carrier (e.g., hot water and steam), and as a reactant, reaction medium, and catalyst for the conversion of raw fuels to synthetic fuels. It explains how supercritical water is used to convert fossil- and bio-based feedstock to synthetic fuels in the presence and absence of a catalyst. It also explores water as a direct source of energy and fuel, such as hydrogen from water dissociation, methane from water-based clathrate molecules, and more.




Water Code


Book Description




Handbook of Fire & Explosion Protection Engineering Principles for Oil, Gas, Chemical, & Related Facilities


Book Description

The security and economic stability of many nations and multinational oil companies are highly dependent on the safe and uninterrupted operation of their oil, gas and chemical facilities. One of the most critical impacts that can occur to these operations are fires and explosions from accidental or political incidents. This publication is intended as a general engineering handbook and reference guideline for those personnel involved with fire and explosion protection aspects of critical hydrocarbon facilities. Design guidelines and specifications of major, small and independent oil companies as well as information from engineering firms and published industry references have been reviewed to assist in its preparation. Some of the latest published practices and research into fire and explosions have also been mentioned.




Marcellus Shale Gas


Book Description







Conservation of Power and Water


Book Description