Radial Flow Without Swirl Between Parallel Disks


Book Description

"An understanding of radial flow between confined boundaries is of practical importance in the design of, for example, radial diffusers and air bearings. To this end a combined experimental and theoretical study has been made of radial flow, without swirl, between parallel disks using air at incompressible speeds. Emphasis has been placed on the pressure distribution sufficiently far downstream of the channel inlet for the entry conditions to be unimportant. However a study has also been made of the main features of the flow near the inlet, particularly within the annular separation bubble." --




Radial Flow Without Swirl Between Parallel Discs


Book Description

An understanding of radial flow between confined boundaries is of practical importance in the design of radial diffusers and air bearings. This study presents a combined experimental and theoretical analysis of radial flow, without swirl, between parallel discs using air at incompressible speeds. Emphasis is place on the pres sure distribution sufficiently far downstream of the channel inlet for the entry conditions to be unimportant. However, a study is also made of the main features of the flow near the inlet, particularly within the annular separation bubble. (Author).




ASME 65-FE-11


Book Description










Turbulence Management and Relaminarisation


Book Description

The last two decades have witnessed an intensifying effort in learning how to manage flow turbulence: it has in fact now become one of the most challenging and prized techno logical goals in fluid dynamics. The goal itself is of course not new. More than a hundred years ago, Reynolds already listed factors conducive to laminar and to turbulent flow (including among them curvature and acceleration). Further more, it is in retrospect clear that there were several early instances ot successful turbulence management. Examples are the reduction in drag achieved with a ring-trip placed on the front of a sphere or the insertion of a splitter-plate behind a circular cylinder; by the early 1950s there were numerous exercises at boundary layer control. Although many of these studies were interesting and suggestive, they led . to no spectacularly successful practical application, and the effort petered out in the late 1950s. The revival of interest in these problems in recent years can be attributed to the emergence of several new factors. First of all, fresh scientific insight into the structure of turbulence, in particular the accumulated evidence for the presence of significant order in turbulent flow, has been seen to point to new methods of managing turbulence. A second major reason has been the growing realisation that the rate at which the world is consuming its reserves of fossil fuels is no longer negligible; the economic value of greater energy effi ciency and lower drag has gone up significantly.




Convective Heat and Mass Transfer in Rotating Disk Systems


Book Description

The book is devoted to investigation of a series of problems of convective heat and mass transfer in rotating-disk systems. Such systems are widespread in scienti?c and engineering applications. As examples from the practical area, one can mention gas turbine and computer engineering, disk brakes of automobiles, rotating-disk air cleaners, systems of microclimate, extractors, dispensers of liquids, evaporators, c- cular saws, medical equipment, food process engineering, etc. Among the scienti?c applications, it is necessary to point out rotating-disk electrodes used for experim- tal determination of the diffusion coef?cient in electrolytes. The system consisting of a ?xed disk and a rotating cone that touches the disk by its vertex is widely used for measurement of the viscosity coef?cient of liquids. For time being, large volume of experimental and computational data on par- eters of ?uid ?ow, heat and mass transfer in different types of rotating-disk systems have been accumulated, and different theoretical approaches to their simulation have been developed. This obviously causes a need of systematization and generalization of these data in a book form.