Reliability Centered Maintenance (RCM)


Book Description

A properly implemented and managed RCM program can save millions in unscheduled maintenance and breakdowns. However, many have found the process daunting. Written by an expert with over 30 years of experience, this book introduces innovative approaches to simplify the RCM process such as: single vs. multiple failure analysis, hidden failures analysis, potentially critical components analysis, run-to-failure and the difference between redundant, standby, and backup functions. Included are real life examples of flawed preventive maintenance programs and how they led to disasters that could have easily been avoided. Also illustrated in detail, with real-life examples, is the step-by-step process for developing, implementing, and maintaining a premier classical RCM program. Senior management, middle management, supervisors, and craftsmen/technicians responsible for plant safety and reliability will find this book to be invaluable as a means for establishing a first class preventive maintenance program.




Reliability Centered Maintenance – Reengineered


Book Description

Reliability Centered Maintenance – Reengineered: Practical Optimization of the RCM Process with RCM-R® provides an optimized approach to a well-established and highly successful method used for determining failure management policies for physical assets. It makes the original method that was developed to enhance flight safety far more useful in a broad range of industries where asset criticality ranges from high to low. RCM-R® is focused on the science of failures and what must be done to enable long-term sustainably reliable operations. If used correctly, RCM-R® is the first step in delivering fewer breakdowns, more productive capacity, lower costs, safer operations and improved environmental performance. Maintenance has a huge impact on most businesses whether its presence is felt or not. RCM-R® ensures that the right work is done to guarantee there are as few nasty surprises as possible that can harm the business in any way. RCM-R® was developed to leverage on RCM’s original success at delivering that effectiveness while addressing the concerns of the industrial market. RCM-R® addresses the RCM method and shortfalls in its application -- It modifies the method to consider asset and even failure mode criticality so that rigor is applied only where it is truly needed. It removes (within reason) the sources of concern about RCM being overly rigorous and too labor intensive without compromising on its ability to deliver a tailored failure management program for physical assets sensitive to their operational context and application. RCM-R® also provides its practitioners with standard based guidance for determining meaningful failure modes and causes facilitating their analysis for optimum outcome. Includes extensive review of the well proven RCM method and what is needed to make it successful in the industrial environment Links important elements of the RCM method with relevant International Standards for risk management and failure management Enhances RCM with increased emphasis on statistical analysis, bringing it squarely into the realm of Evidence Based Asset Management Includes extensive, experience based advice on implementing and sustaining RCM based failure management programs




Reliability-centered Maintenance


Book Description

Completely reorganised and comprehensively rewritten for its second edition, this guide to reliability-centred maintenance develops techniques which are practised by over 250 affiliated organisations worldwide.







Maintenance and Reliability Best Practices


Book Description

Drawing upon the authors many years of shop floor and management experience in a variety of industries, this




Effective FMEAs


Book Description

Outlines the correct procedures for doing FMEAs and how to successfully apply them in design, development, manufacturing, and service applications There are a myriad of quality and reliability tools available to corporations worldwide, but the one that shows up consistently in company after company is Failure Mode and Effects Analysis (FMEA). Effective FMEAs takes the best practices from hundreds of companies and thousands of FMEA applications and presents streamlined procedures for veteran FMEA practitioners, novices, and everyone in between. Written from an applications viewpoint—with many examples, detailed case studies, study problems, and tips included—the book covers the most common types of FMEAs, including System FMEAs, Design FMEAs, Process FMEAs, Maintenance FMEAs, Software FMEAs, and others. It also presents chapters on Fault Tree Analysis, Design Review Based on Failure Mode (DRBFM), Reliability-Centered Maintenance (RCM), Hazard Analysis, and FMECA (which adds criticality analysis to FMEA). With extensive study problems and a companion Solutions Manual, this book is an ideal resource for academic curricula, as well as for applications in industry. In addition, Effective FMEAs covers: The basics of FMEAs and risk assessment How to apply key factors for effective FMEAs and prevent the most common errors What is needed to provide excellent FMEA facilitation Implementing a "best practice" FMEA process Everyone wants to support the accomplishment of safe and trouble-free products and processes while generating happy and loyal customers. This book will show readers how to use FMEA to anticipate and prevent problems, reduce costs, shorten product development times, and achieve safe and highly reliable products and processes.




Revenue Cycle Management


Book Description

It is easy to get lost in all the phases of revenue management, so how does a practice keep it all straight? Proven solutions to optimize revenue cycle are the key, and this primer is a business-critical resource to deliver just that.




A Concise Guide to Continuity of Care in Midwifery


Book Description

Continuity of care in midwifery – the most traditional way of practising – has been overlooked for much of the last century but is re-emerging as an evidence-based model of care, one which is known to benefit women. This book is a vital companion to students and qualified midwives as continuity of care is integrated into midwifery education and services. A practical, easy-to-read guide to practising caseload midwifery, this book outlines the contemporary political and professional context for midwifery care, different models of care, and the evidence and outcomes associated with continuity of carer. It discusses the real-life concerns, challenges and opportunities of working closely with women throughout their pregnancy and birth, covering key issues such as risk assessment, consent, boundaries, time management, documentation, communication, burnout and decision-making. Supporting the development of midwives from students to newly qualified professionals and beyond, it ends with a chapter containing a range of resources for reference, including helpful tools and worksheets. Including vignettes from students, qualified midwives, and women and their partners, this book is designed for anyone new to practising midwifery continuity of care.




Reflectance Confocal Microscopy for Skin Diseases


Book Description

This book focuses on the use and significance of in vivo reflectance confocal microscopy (RCM) for non-invasive high-resolution imaging of the skin. All of the chapters in this hands-on guide are generously illustrated with numerous confocal images and structured in a reader-friendly way. The contents include detailed information on the most relevant and up-to-date aspects of RCM, schematic drawings summarizing and explaining the most important RCM criteria, and a chapter specifically devoted to bridging the gap between dermoscopy, RCM, and histopathology. At the end of each chapter, core messages recapitulate the most pertinent aspects. Reflectance Confocal Microscopy for Skin Diseases will be a valuable resource for all physicians involved in the diagnosis and treatment of neoplastic and inflammatory skin diseases.




Machine Reliability and Condition Monitoring: A Comprehensive Guide to Predictive Maintenance Planning


Book Description

Condition monitoring is the process of keeping an eye on a machine's condition parameter in order to spot any major changes that could be signs of a malfunction developing. It plays a significant role in preventive maintenance and is a major component of predictive maintenance. By combining machine sensor data that detects vibration and other characteristics (in real-time) with cutting-edge machine monitoring software, condition monitoring (CM), a maintenance strategy, anticipates machine health and safety. Predictive Maintenance strategy employs vibration analysis, thermography analysis, ultrasound analysis, oil analysis and other techniques to improve machine reliability. The goal of the strategy is to provide the stated function of the facility, with the required reliability and availability at the lowest cost.