Reducing Work Zone Crashes by Using Vehicle's Warning Flashers as a Warning Sign


Book Description

Rural two-lane highways constitute a large percentage of the highway system in Kansas. Preserving, expending, and enhancing these highways require the set-up of a large number of one-lane, two-way work zones where traffic safety has been a severe concern. Aimed at reducing the work zone crashes attributable to inattentive driving, the Kansas Department of Transportation (KDOT) initiated a research project to evaluate the effectiveness of a traffic warning sign that is assembled by using the emergency warning flashers of the vehicles in one-lane, two-way work zones. This warning sign was named as the Emergency Flasher Traffic Control Device (EFTCD). It works in the following fashion. When a vehicle entering a one-lane, two-way work zone where stopping is required for waiting to pass the work zone, the driver is required to turn on its emergency warning flashers to warn the following vehicles of the work zone stopping condition. The EFTCD is flexible and cost-effective and may particularly benefit those work zones that are frequently moved due to the construction progress. To accurately evaluate the effectiveness of the proposed EFTCD, researchers conducted experiments in three one-lane, two-way work zones in Kansas including two with a 55-mph speed limit and one with a 65-mph speed limit. During experimental period, researchers collected vehicle speed data with and without the EFTCD and surveyed drivers for their interpretation of this warning sign and recommendation on its potential implementation. Analyses results showed that the EFTCD effectively reduced the mean speeds in work zones as well as the proportions of notably high speeds. In addition, survey results indicated that the EFTCD successfully captured the attention of most drivers when they approached the work zones. A majority of drivers recommended the implementation of this warning sign in the work zones. Therefore, researchers concluded that the EFTCD was effective in one-lane, two-way work zones. Recommendations on future research were also presented based on the results of this study. The outcomes of this research project benefit not only Kansas, but also other States where rural two-lane highways constitute a high percentage of their highway systems.




Roadside Design Guide


Book Description













Manual on Uniform Traffic Control Devices


Book Description




Roadside Design Guide


Book Description

"The Roadside Design Guide presents a synthesis of current information and operating practices related to roadside safety and is written in dual units-metric and U.S. Customary. This book is a guide. It is not a standard, nor is it a design policy. It is intended to use as a resource document from which individual highway agencies can develop standards and policies. Although much of the material in the guide can be considered universal in its application, several recommendations are subjective in nature and may need modification to fit local conditions. However, it is important that significant deviations from the guide be based on operational experience and objective analysis. The 2011 edition of the AASHTO Roadside Design Guide has been updated to include hardware that has met the evaluation criteria contained in the National Cooperative Highway Research Program (NCHRP) Report 350: Recommended Procedures for the Safety Performance Evaluation of Highway Features and begins to detail the most current evaluation criteria contained under the Manual for Assessing Safety Hardware, 2009 (MASH). For the most part, roadside hardware tested and accepted under older guidelines that are no longer applicable has not been excluded in this edition." -- AASHTO website.




Manual on Uniform Traffic Control Devices


Book Description

The Manual of Uniform Traffice Control Devices (MUTCD) is aproved by the Federal Highway Administrator as the National Standard in accordance with Title 23 U.S. Code, Sections 109(d), 114(a), 217, 315, and 402(a), 23 CFR 655, and 49 CFR 1.48(b)(33), and 1.48(c)(2).





Book Description




Roads and the Environment


Book Description

Content Description #Includes bibliographical references and index.