Reliability of Dynamically Sensitive Offshore Platforms Exposed to Extreme Waves


Book Description

The growing interest in the use of offshore platforms in deeper waters and harsher environments, as well as the desire to extend the operation of existing structures beyond their design lives, is increasing attention on the assessment of their dynamic response and their failure conditions under extreme storm loading. There are a large number of factors influencing the performance of dynamically sensitive platforms, but a major issue is how to include all of the irregularity, directionality and nonlinearity that ocean waves cause on their loading. Therefore, the role each plays in the assessment of dynamically sensitive structures under extreme loads is investigated systematically in this thesis. The aim is to develop practical methods to estimate extreme response and the probability of failure of dynamically sensitive offshore structures in a given sea-state. The directionality and nonlinearity of ocean waves has been captured in this thesis by extending the formulations of the NewWave and Constrained NewWave theories. NewWave is a deterministic method that accounts for the spectral composition of the sea-state, and can be used as an alternative to both regular wave and full random time domain simulations of lengthy time histories. Based on this theory a predetermined crest height and the surface elevation around the crest during an extreme event can be theoretically simulated. Constrained NewWave, which is generated by mathematically constraining a NewWave within a random time series, allows the irregularity of ocean waves to be considered. These wave theories have been extended in this thesis to include 2nd order and directionality effects, and their formulations have been written into a new Fortran code for calculation of the water surface and water particle kinematics. The effects of irregularity, directionality and nonlinearity of ocean waves on dynamically sensitive structures are then shown for an example mobile jack-up drilling platform. The sample jack-up platform is modelled in the USFOS software, and includes the effects of material and geometrical nonlinearities as well as spudcan-soil-structure nonlinear interactions. Finally, based on structured application of multiple Constrained NewWaves in combination with the Monte Carlo method, a framework is proposed to estimate the extreme response and the failure probability of dynamically sensitive offshore structures exposed to a given duration of the one extreme sea-state. The results demonstrate that in an extreme event the irregularity, directionality and nonlinearity of ocean waves have considerable effects on the overall performance of the sample jack-up platform. It is shown that the extreme response and the probability of failure of the sample jackup are not only governed by the maximum crest elevation but also depend on the random background of ocean waves. In addition, it is indicated that the inclusion of the directionality effects of ocean waves results in reductions in the extreme response and failure rate of the sample jack-up platform. On the other hand, the nonlinearity effects cause additional energy in low and high frequencies and raise the crest height, which increases the extreme response of the sample jack-up platform. The methods developed in this thesis have application to any dynamically sensitive structure and will help reduce the level of uncertainty in predicting their extreme response or failure probability. This may help in extending their operational conditions, say into deeper waters and harsher sea-states, or in extending their operational life.




Offshore Compliant Platforms


Book Description

A guide to the analysis and design of compliant offshore structures that highlights a new generation of platforms Offshore Compliant Platforms provides an authoritative guideto the analysis and design of compliant offshore structures and puts the focus on a new generation of platforms such as: triceratops, Buoyant Leg Storage and Regasification platforms. Whilst the authors – noted experts on the topic – include basic information on the conceptual development of conventional platforms, the book presents detailed descriptions of the design and development of new deep-water platforms. The book describes the preliminary design of triceratops in ultra-deep waters and presents a detailed analysis of environmental loads that are inherent in offshore locations such as wave, wind and current. The new methodology for the dynamic analysis of triceratops under ice loads, predominantly in ice-covered regions, is also examined with detailed parametric studies. In addition, the book covers the structural geometry and the various methods of analysis for assessing the performance of any other similar offshore platform under the special loads. A discussion of the fatigue analysis and service life prediction is also included. This important book: • Includes the analysis and design of compliant offshore structures with a focus on a new generation of platforms • Examines the preliminary design of triceratops in ultra-deep waters • Covers an analysis of environmental loads that are inherent in offshore locations such as wave, wind and current • Reviews the structural geometry and various methods of analysis for assessing the performance of any other similar offshore platform under special loads • Discusses fatigue analysis and service life prediction Written for engineers and researchers across engineering including civil, mechanical, structural, offshore, ocean and naval architecture, Offshore Compliant Platforms fills the need for a guide to new offshore platforms that provides an understanding of the behaviour of these structures under different loading conditions.













Environmental Load Factors and System Strength Evaluation of Offshore Jacket Platforms


Book Description

This book presents a study for the determination of environmental load factors for Jacket Platforms in Malaysia and a methodology to determine the life extension of aging platforms. The simplified methods described here could be used for determining not only structural reliability but also safety factors. Its content is particularly interesting to design and maintenance engineers who are working in offshore or onshore industry.




Design Aids for Offshore Topside Platforms Under Special Loads


Book Description

Offshore platforms face many risks, including a hostile ocean environment, extreme temperatures, overpressure loads, fire risks, and hydrocarbon explosions, all of which pose unique challenges in designing their topside platforms. The topside design also involves the selection of appropriate materials to reduce fire risk without compromising the functional requirements. These platforms serve valuable, utility, production, and processing purposes, and can also provide living quarters for personnel. Concepts such as basic design, special design, materials selection, and risk hazards are explained in the authors' straightforward classroom style, and are based on their rich experience in both academia and industry. Features • Includes practical examples which are solved using international codes to offer a better understanding of the subjects presented • Addresses safety and risk of offshore platforms, and considers numerous topside accident scenarios • Discusses the structural and mechanical properties of various materials, such as steel and newer functionally graded materials (FGMs) Design Aids for Offshore Topside Platforms Under Special Loads serves as a design manual for multi-disciplinary engineering graduates and practicing professionals working in civil, mechanical, offshore, naval, and petroleum engineering fields. In addition, the book will serve as reference manual for practicing design engineers and risk assessors.




Piers, Jetties and Related Structures Exposed to Waves


Book Description

Piers, Jetties and Related Structures Exposed to Waves, Second Edition delivers guidelines for engineers to analyse and optimise pier and jetty designs. It is essential reading for maritime designers and consultants tasked with analysing, designing and constructing piers and jetties.