Residual Stress and Stress Relaxation


Book Description

The Army Materials and Mechanics Research Center in coop eration with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University has been conducting the Annual Sagamore Army Materials Research Conference since 1954. The specific purpose of these conferences has been to bring together scientists and engineers from academic institutions, industry and government who are uniquely qualified to explore in depth a subject of importance to the Department of Defense, the Army and the scientific community. These proceedings, entitled RESIDUAL STRESS AND STRESS RELAXATION, address the nature of residual stresses and their measurements, the sources of residual stress, stress relaxation, sub-critical crack growth in the presence of residual stress, residual stresses and properties, and research in progress. We wish to acknowledge the assistance of Mr. Dan McNaught of the Army Materials and Mechanics Research Center and Mr. Robert J. Sell and Helen Brown DeMascio of Syracuse University throughout the stages of the conference planning and finally the publication of the book. The continued active interest and support of these conferences by Dr. E. Wright, Director of the Army Materials and Mechanics Research Center, is appreciated.




A Teaching Essay on Residual Stresses and Eigenstrains


Book Description

Residual stresses are an important subject in materials science and engineering that has implications across disciplines, from quantum dots to human teeth, from aeroengines to automotive surface finishing. Although a number of monographs exist, no resource is available in the form of a book to serve as a good basis for teaching the fundamentals. A Teaching Essay on Residual Stresses and Eigenstrains introduces eigenstrain methods as a powerful unified approach to residual stress modeling, measurement, and management. Starting with simple residual stress states, the key relationships are elucidated between deformation processes, inelastic strains (eigenstrains) these may introduce, and the resulting residual stress states. This book is written not only for the materials scientist, mechanical engineer, and student seeking to appreciate the origins of residual stress, but also for the more mature researcher and industrial engineer looking to improve their understanding of the eigenstrain approach to describing residual stress. - Provides a unified basis for understanding the fundamentals of residual stress origins and consequences - Introduces a classification of the most important residual stress states and their efficient description, as well as discussing measurement approaches, their limitations, and uses - Approaches the nature and application of eigenstrain methods in a systematic way to describe residual stress fields




Handbook of Residual Stress and Deformation of Steel


Book Description

Annotation Examines the factors that contribute to overall steel deformation problems. The 27 articles address the effect of materials and processing, the measurement and prediction of residual stress and distortion, and residual stress formation in the shaping of materials, during hardening processes, and during manufacturing processes. Some of the topics are the stability and relaxation behavior of macro and micro residual stresses, stress determination in coatings, the effects of process equipment design, the application of metallo- thermo-mechanic to quenching, inducing compressive stresses through controlled shot peening, and the origin and assessment of residual stresses during welding and brazing. Annotation c. Book News, Inc., Portland, OR (booknews.com)




Residual Stress Measurement and the Slitting Method


Book Description

This book provides complete coverage of the slitting method. It details new results in analysis, computation, and estimation and discusses different roles of residual stresses from the fracture mechanics perspective. It provides detailed formulations and examples of compliance functions, weighted least squares fit and convergence test in stress estimation, and computer programs to facilitate the implementation of the slitting method.




Residual Stresses 2016


Book Description

This book presents the proceedings of the International Conference on Residual Stresses 10 and is devoted to the prediction/modelling, evaluation, control, and application of residual stresses in engineering materials. New developments, on stress-measurement techniques, on modelling and prediction of residual stresses and on progress made in the fundamental understanding of the relation between the state of residual stress and the material properties, are highlighted. The proceedings offer an overview of the current understanding of the role of residual stresses in materials used in wide ranging application areas.




Residual Stress and Stress Relaxation


Book Description

The Army Materials and Mechanics Research Center in coop eration with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University has been conducting the Annual Sagamore Army Materials Research Conference since 1954. The specific purpose of these conferences has been to bring together scientists and engineers from academic institutions, industry and government who are uniquely qualified to explore in depth a subject of importance to the Department of Defense, the Army and the scientific community. These proceedings, entitled RESIDUAL STRESS AND STRESS RELAXATION, address the nature of residual stresses and their measurements, the sources of residual stress, stress relaxation, sub-critical crack growth in the presence of residual stress, residual stresses and properties, and research in progress. We wish to acknowledge the assistance of Mr. Dan McNaught of the Army Materials and Mechanics Research Center and Mr. Robert J. Sell and Helen Brown DeMascio of Syracuse University throughout the stages of the conference planning and finally the publication of the book. The continued active interest and support of these conferences by Dr. E. Wright, Director of the Army Materials and Mechanics Research Center, is appreciated.




Residual Stresses in Composite Materials


Book Description

Residual stresses are a common phenomenon in composite materials. They can either add to or significantly reduce material strength. Because of the increasing demand for high-strength, light-weight materials such as composites and their wide range of applications in the aerospace and automotive industries, in civil infrastructure and in sporting applications, it is critical that the residual stresses of composite materials are understood and measured correctly.The first part of this important book reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses. Various mathematical (analytical and numerical) methods for calculation of residual stresses in composite materials are also presented. Chapters in the first section of the book discuss the simulated hole drilling method, the slitting/crack compliance method, measuring residual stresses in homogeneous and composite glass materials using photoelastic techniques, and modeling residual stresses in composite materials. The second part of the book discusses residual stresses in polymer matrix, metal-matrix and a range of other types of composites. Moreover, the addition of nanoparticles to the matrix of polymeric composites as a new technique for reduction of residual stresses is discussed.Residual stresses in composite materials provides a comprehensive overview of this important topic, and is an invaluable reference text for both academics and professionals working in the mechanical engineering, civil engineering, aerospace, automotive, marine and sporting industries. - Reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses - Discusses residual stresses in polymer matrix, metal-matrix and other types of composite - Considers the addition of nanoparticles to the matrix of polymeric composites as a new technique for reduction of residual stresses




Fatigue Assessment of Welded Joints by Local Approaches


Book Description

Local approaches to fatigue assessment are used to predict the structural durability of welded joints, to optimise their design and to evaluate unforeseen joint failures. This standard work provides a systematic survey of the principles and practical applications of the various methods. It covers the hot spot structural stress approach to fatigue in general, the notch stress and notch strain approach to crack initiation and the fracture mechanics approach to crack propagation. Seam-welded and spot-welded joints in structural steels and aluminium alloys are also considered.This completely reworked second edition takes into account the tremendous progress in understanding and applying local approaches which has been achieved in the last decade. It is a standard reference for designers, structural analysts and testing engineers who are responsible for the fatigue-resistant in-service behaviour of welded structures. - Completely reworked second edition of a standard work providing a systematic survey of the principles and practical applications of the various methods - Covers the hot spot structural stress approach to fatigue in general, the notch stress and notch strain approach to crack initiation and the fracture mechanics approach to crack propagation. - Written by a distinguished team of authors




Springer Handbook of Experimental Solid Mechanics


Book Description

The Springer Handbook of Experimental Solid Mechanics documents both the traditional techniques as well as the new methods for experimental studies of materials, components, and structures. The emergence of new materials and new disciplines, together with the escalating use of on- and off-line computers for rapid data processing and the combined use of experimental and numerical techniques have greatly expanded the capabilities of experimental mechanics. New exciting topics are included on biological materials, MEMS and NEMS, nanoindentation, digital photomechanics, photoacoustic characterization, and atomic force microscopy in experimental solid mechanics. Presenting complete instructions to various areas of experimental solid mechanics, guidance to detailed expositions in important references, and a description of state-of-the-art applications in important technical areas, this thoroughly revised and updated edition is an excellent reference to a widespread academic, industrial, and professional engineering audience.




New Challenges in Residual Stress Measurements and Evaluation


Book Description

Residual stresses (RS) are stresses present inside materials even in the absence of any applied load. They are of capital importance because they can impact greatly on the mechanical strength of the material, on its dimensional correspondence to design specifications as well as on the fatigue life of the part. RS measurement and evaluation is currently an important research topic where a lot of challenges still need to be addressed. This book aims to provide the reader with an overview of the principal novelties in this field including current limitations and potential future developments. Both radically new experimental approaches as well as recent evolutions of consolidated ones will be presented, along with the latest novelties in the area of numerical residual stress evaluation.