› › Revealing The Morphology Of Small Molecule Organic Solar Cell By Electron Microscopy

Correlating structure and function in small molecule organic solar cells by means of scanning probe and electron microscopy

Author : Michael Scherer

Publisher : BoD – Books on Demand

Page : 202 pages

File Size : 42,25 MB

Release : 2016-07-20

Category : Science

ISBN : 3741251526

Get eBook

Book Description

In this work nanoscale properties in active layers of small molecule organic solar cells are studied regarding their impact on device performance. For this, the effect of variations in stack design and process conditions is examined both electrically and with high resolution imaging techniques. Two topics are addressed: (i) the visualization of charge extraction/injection properties of solar cell contacts and (ii) the tailoring of structural properties of co-evaporated material blends for bulk heterojunction (BHJ) organic solar cells. (i) We study the impact of controlled contact manipulation on the internal electric potential distribution of fluorinated zincphtalocyanine (F4ZnPc)/fullerene (C60) organic solar cells under operating conditions. In a detailed analytical study using photoelectron spectroscopy and in-operando scanning Kelvin probe microscopy it is demonstrated that the electric field distribution of organic solar cells at the maximum power point depends in an overproportional manner on contact properties and ranges from bulk to contact dominated even for solar cells with decent device performance. (ii) The morphology of co-evaporated active layer blends depends on both substrate and substrate temperature. Here we study the morphology of F4ZnPc:C60 blends with analytical transmission electron microscopy. For all substrates used is found that co-evaporation of the materials at elevated substrate temperature (100° Cel) induces a distinct phase segregation of F4ZnPc and C60. However, only when using a C60 underlayer, as in inverted devices, also the crystallinity of the segregated C60 phase increases. There is only a slight increase in crystallinity when F4ZnPc acts as an underlayer, as typically for non-inverted devices. Solar cell characterization reveals that the crystalline C60 domains are the main driving force for enhanced free charge carrier generation and higher power conversion efficiencies. With this we could provide a novel explanation why record efficiencies of small molecule organic solar cells are realized in inverted device architecture only.



Organic Solar Cells

Author : Qiquan Qiao

Publisher : CRC Press

Page : 510 pages

File Size : 29,33 MB

Release : 2017-12-19

Category : Science

ISBN : 1351831216

Get eBook

Book Description

Current energy consumption mainly depends on fossil fuels that are limited and can cause environmental issues such as greenhouse gas emissions and global warming. These factors have stimulated the search for alternate, clean, and renewable energy sources. Solar cells are some of the most promising clean and readily available energy sources. Plus, the successful utilization of solar energy can help reduce the dependence on fossil fuels. Recently, organic solar cells have gained extensive attention as a next-generation photovoltaic technology due to their light weight, mechanical flexibility, and solution-based cost-effective processing. Organic Solar Cells: Materials, Devices, Interfaces, and Modeling provides an in-depth understanding of the current state of the art of organic solar cell technology. Encompassing the full spectrum of organic solar cell materials, modeling and simulation, and device physics and engineering, this comprehensive text: Discusses active layer, interfacial, and transparent electrode materials Explains how to relate synthesis parameters to morphology of the photoactive layer using molecular dynamics simulations Offers insight into coupling morphology and interfaces with charge transport in organic solar cells Explores photoexcited carrier dynamics, defect states, interface engineering, and nanophase separation Covers inorganic–organic hybrids, tandem structure, and graphene-based polymer solar cells Organic Solar Cells: Materials, Devices, Interfaces, and Modeling makes an ideal reference for scientists and engineers as well as researchers and students entering the field from broad disciplines including chemistry, material science and engineering, physics, nanotechnology, nanoscience, and electrical engineering.



Fullerene Polymers

Author : Nazario Martín

Publisher : John Wiley & Sons

Page : 332 pages

File Size : 15,9 MB

Release : 2009-08-14

Category : Science

ISBN : 9783527628759

Get eBook

Book Description

Written by an outstanding team of experts in the interdisciplinary areas of research, this book is based on a new classification of the different types of fullerene polymers according to their chemical structures. It covers all aspects, from different classes, to their synthesis and applications in material science. Of great interest to polymer and synthetic chemists, but also for material scientists and industrial chemists.



Organic and Hybrid Solar Cells

Author : Lukas Schmidt-Mende

Publisher : Walter de Gruyter GmbH & Co KG

Page : 518 pages

File Size : 28,59 MB

Release : 2016-05-24

Category : Technology & Engineering

ISBN : 3110388510

Get eBook

Book Description

With the increasing world-energy demand there is a growing necessity for clean and renewable energy. The sun being one of the most abundant potential sources accounts for less than 1% of the global energy supply. The market for solar cells is one of the most strongly increasing markets, even though the prize of conventional solar cells is still quite high. New emerging technologies, such as organic and hybrid solar cells have the potential to decrease the price of solar energy drastically. This book offers an introduction to these new types of solar cells and discusses fabrication, different architectures and their device physics on the bases of the author's teaching course on a master degree level. A comparison with conventional solar cells will be given and the specialties of organic solar cells emphasized.



Organic Solar Cells

Author : Wolfgang Tress

Publisher : Springer

Page : 474 pages

File Size : 32,50 MB

Release : 2014-11-22

Category : Technology & Engineering

ISBN : 3319100971

Get eBook

Book Description

This book covers in a textbook-like fashion the basics or organic solar cells, addressing the limits of photovoltaic energy conversion and giving a well-illustrated introduction to molecular electronics with focus on the working principle and characterization of organic solar cells. Further chapters based on the author’s dissertation focus on the electrical processes in organic solar cells by presenting a detailed drift-diffusion approach to describe exciton separation and charge-carrier transport and extraction. The results, although elaborated on small-molecule solar cells and with focus on the zinc phthalocyanine: C60 material system, are of general nature. They propose and demonstrate experimental approaches for getting a deeper understanding of the dominating processes in amorphous thin-film based solar cells in general. The main focus is on the interpretation of the current-voltage characteristics (J-V curve). This very standard measurement technique for a solar cell reflects the electrical processes in the device. Comparing experimental to simulation data, the author discusses the reasons for S-Shaped J-V curves, the role of charge carrier mobilities and energy barriers at interfaces, the dominating recombination mechanisms, the charge carrier generation profile, and other efficiency-limiting processes in organic solar cells. The book concludes with an illustrative guideline on how to identify reasons for changes in the J-V curve. This book is a suitable introduction for students in engineering, physics, material science, and chemistry starting in the field of organic or hybrid thin-film photovoltaics. It is just as valuable for professionals and experimentalists who analyze solar cell devices.



Stability and Degradation of Organic and Polymer Solar Cells

Author : Frederik C. Krebs

Publisher : John Wiley & Sons

Page : 375 pages

File Size : 38,53 MB

Release : 2012-04-23

Category : Technology & Engineering

ISBN : 1119952514

Get eBook

Book Description

Organic photovoltaics (OPV) are a new generation of solar cells with the potential to offer very short energy pay back times, mechanical flexibility and significantly lower production costs compared to traditional crystalline photovoltaic systems. A weakness of OPV is their comparative instability during operation and this is a critical area of research towards the successful development and commercialization of these 3rd generation solar cells. Covering both small molecule and polymer solar cells, Stability and Degradation of Organic and Polymer Solar Cells summarizes the state of the art understanding of stability and provides a detailed analysis of the mechanisms by which degradation occurs. Following an introductory chapter which compares different photovoltaic technologies, the book focuses on OPV degradation, discussing the origin and characterization of the instability and describing measures for extending the duration of operation. Topics covered include: *Chemical and physical probes for studying degradation *Imaging techniques *Photochemical stability of OPV materials *Degradation mechanisms *Testing methods *Barrier technology and applications Stability and Degradation of Organic and Polymer Solar Cells is an essential reference source for researchers in academia and industry, engineers and manufacturers working on OPV design, development and implementation.





Semiconducting Polymers

Author : Christine Luscombe

Publisher : Royal Society of Chemistry

Page : 293 pages

File Size : 13,86 MB

Release : 2016-10-12

Category : Technology & Engineering

ISBN : 1782624007

Get eBook

Book Description

Semiconducting polymers are of great interest for applications in electroluminescent devices, solar cells, batteries and diodes. In recent years vast advances have been made in the area of controlled synthesis of semiconducting polymers, specifically polythiophenes. The book is separated into two main sections, the first will introduce the advances made in polymer synthesis, and the second will focus on the microstructure and property analysis that has been enabled because of the recent advances in synthetic strategies. Edited by one of the leaders in the area of polythiophene synthesis, this new book will bring the field up to date with more recent models for understanding semiconducting polymers. The book will be applicable to materials and polymers chemists in industry and academia from postgraduate level upwards.



Conjugated Polymers

Author : John R. Reynolds

Publisher : CRC Press

Page : 847 pages

File Size : 32,8 MB

Release : 2019-03-25

Category : Technology & Engineering

ISBN : 1315159295

Get eBook

Book Description

This book covers properties, processing, and applications of conducting polymers. It discusses properties and characterization, including photophysics and transport. It then moves to processing and morphology of conducting polymers, covering such topics as printing, thermal processing, morphology evolution, conducting polymer composites, thin films



Transmission Electron Microscopy Characterization of Nanomaterials

Author : Challa S.S.R. Kumar

Publisher : Springer Science & Business Media

Page : 718 pages

File Size : 45,53 MB

Release : 2013-12-09

Category : Science

ISBN : 3642389341

Get eBook

Book Description

Third volume of a 40volume series on nanoscience and nanotechnology, edited by the renowned scientist Challa S.S.R. Kumar. This handbook gives a comprehensive overview about Transmission electron microscopy characterization of nanomaterials. Modern applications and state-of-the-art techniques are covered and make this volume an essential reading for research scientists in academia and industry.