› › Rotordynamics Of Automotive Turbochargers

Rotordynamics of Automotive Turbochargers

Author : Hung Nguyen-Schäfer

Publisher : Springer

Page : 367 pages

File Size : 23,32 MB

Release : 2015-05-15

Category : Technology & Engineering

ISBN : 3319176447

Get eBook

Book Description

Rotordynamics of automotive turbochargers is dealt with in this book encompassing the widely working field of small turbomachines under real operating conditions at the very high rotor speeds up to 300000 rpm. The broadly interdisciplinary field of turbocharger rotordynamics involves 1) Thermodynamics and Turbo-Matching of Turbochargers 2) Dynamics of Turbomachinery 3) Stability Analysis of Linear Rotordynamics with the Eigenvalue Theory 4) Stability Analysis of Nonlinear Rotordynamics with the Bifurcation Theory 5) Bearing Dynamics of the Oil Film using the Two-Phase Reynolds Equation 6) Computation of Nonlinear Responses of a Turbocharger Rotor 7) Aero and Vibroacoustics of Turbochargers 8) Shop and Trim Balancing at Two Planes of the Rotor 9) Tribology of the Bearing Surface Roughness 10) Design of Turbocharger Platforms using the Similarity Laws The rotor response of an automotive turbocharger at high rotor speeds is studied analytically, computationally, and experimentally. Due to the nonlinear characteristics of the oil-film bearings, some nonlinear responses of the rotor besides the harmonic response 1X, such as oil whirl, oil whip, and modulated frequencies occur in Waterfall diagram. Additionally, the influences of the surface roughness and oil characteristics on the rotor behavior, friction, and wear are discussed. This book is written by an industrial R&D expert with many years of experience in the automotive and turbocharger industries. The all-in-one book of turbochargers is intended for scientific and engineering researchers, practitioners working in the rotordynamics field of automotive turbochargers, and graduate students in applied physics and mechanical engineering.



Rotordynamics of Automotive Turbochargers

Author : Hung Nguyen-Schäfer

Publisher : Springer Science & Business Media

Page : 327 pages

File Size : 46,99 MB

Release : 2012-03-06

Category : Technology & Engineering

ISBN : 3642275184

Get eBook

Book Description

This book deals with rotordynamics of automotive turbochargers while encompassing the analysis of the dynamics of rotating machines at very high rotor speeds of 300,000 rpm and above. This interdisciplinary field involves 1. thermodynamics and turbo-matching knowledge to compute working conditions of turbochargers, 2. fluid and bearing dynamics to calculate various operating thrust loads and to design the rotating floating ring bearings (two-oil-film bearings), and 3. tribology to improve the rotor stability and to reduce the bearing friction. Mathematical background in modeling and simulation methods is necessary; however, the prerequisites have been kept to a minimum. The book addresses both practitioners working in the field of rotordynamics of automotive turbochargers and graduate students in mechanical engineering.



Aero and Vibroacoustics of Automotive Turbochargers

Author : Hung Nguyen-Schäfer

Publisher : Springer Science & Business Media

Page : 145 pages

File Size : 42,5 MB

Release : 2013-01-06

Category : Technology & Engineering

ISBN : 3642350704

Get eBook

Book Description

Aero and Vibroacoustics of Automotive Turbochargers is a topic involving aspects from the working fields of thermodynamics of turbomachinery, aerodynamics, rotordynamics, and noise propagation computation. In this broadly interdisciplinary subject, thermodynamics of turbomachinery is used to design the turbocharger and to determine its operating conditions. Aerodynamics is needed to study the compressor flow dynamics and flow instabilities of rotating stall and surge, which can produce growling and whining-type noises. Rotordynamics is necessary to study rotor unbalance and self-excited oil-whirl instabilities, which lead to whistling and constant tone-type noises in rotating floating oil-film type bearings. For the special case of turbochargers using ball bearings, some high-order harmonic and wear noises also manifest in the rotor operating range. Lastly, noise propagation computation, based on Lighthill’s analogy, is required to investigate airborne noises produced by turbochargers in passenger vehicles. The content of this book is intended for advanced undergraduates, graduates in mechanical engineering, research scientists and practicing engineers who want to better understand the interactions between these working fields and the resulting impact on the interesting topic of Aero and Vibroacoustics of Automotive Turbochargers.



Advances in Applied Mechanical Engineering

Author : Hari Kumar Voruganti

Publisher : Springer Nature

Page : 1161 pages

File Size : 33,9 MB

Release : 2020-02-01

Category : Science

ISBN : 9811512019

Get eBook

Book Description

This book presents select peer reviewed proceedings of the International Conference on Applied Mechanical Engineering Research (ICAMER 2019). The books examines various areas of mechanical engineering namely design, thermal, materials, manufacturing and industrial engineering covering topics like FEA, optimization, vibrations, condition monitoring, tribology, CFD, IC engines, turbo-machines, automobiles, manufacturing processes, machining, CAM, additive manufacturing, modelling and simulation of manufacturing processing, optimization of manufacturing processing, supply chain management, and operations management. In addition, recent studies on composite materials, materials characterization, fracture and fatigue, advanced materials, energy storage, green building, phase change materials and structural change monitoring are also covered. Given the contents, this book will be useful for students, researchers and professionals working in mechanical engineering and allied fields.



Rotor Dynamics of Turbomachinery

Author : Duncan Nicol Walker

Publisher :

Page : 340 pages

File Size : 37,57 MB

Release : 2020-09-15

Category :

ISBN :

Get eBook

Book Description

Rotor dynamics model creation and analyses are essential parts of new machine design and development for lateral, torsional and axial vibration. These processes are also needed for addressing vibration problems or failure investigations for equipment in service.Lack of sufficient experience by analysts can result in creation of vibration mathematical models that are inadequate for these purposes. Reliance on sophisticated analytical tools that are commercially available will not help achieve needed accuracy of results if inadequate model data are used. This book focuses on large high speed turbine-generators as are they are difficult to model. Information provided gives guidance for preparing suitable models, defines analysis methods and interpretation of vibration results. Numerous case studies are provided showing model creation and definition and corresponding torsional and lateral vibration results. Expected accuracy of vibration predictions is provided. Processes such as high speed balancing and fatigue life consumption estimation is discussed in detail. Reference is made to relevant domestic and international vibration standards.



11th International Conference on Turbochargers and Turbocharging

Author : IMechE

Publisher : Elsevier

Page : 497 pages

File Size : 14,21 MB

Release : 2014-08-25

Category : Technology & Engineering

ISBN : 0081000340

Get eBook

Book Description

The future market forces and environmental considerations in the passenger car and commercial vehicle sector mean more stringent engine downsizing is far more prevalent. Therefore, novel systems are required to provide boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems for high efficiency, response, reliability, durability and compactness. The current emission legislations and environmental trends for reducing CO2 and fuel consumption are the major market forces in the land and marine transport industries. The internal combustion engine is the key product and downsizing, efficiency and economy are the driving forces for development for both spark ignition (SI) and compression ignition (CI) engines in both markets. Future market forces and environmental considerations for transportation, specifically in the passenger car, commercial vehicle and the marine sectors mean more stringent engine downsizing. This international conference is the latest in the highly successful and prestigious series held regularly since 1978. These proceedings from the Institution's highly successful and prestigious series address current and novel aspects of turbocharging systems design, boosting solutions for engine downsizing and improvements in efficiency, and present the latest research and development in this growing and innovative area. - Focuses on boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems - Explores the current need for high efficiency, reliability, durability and compactness in recovery systems - Examines what new systems developments are underway



Structural Dynamics of Turbo-Machines

Author : A. S. Rangwala

Publisher : New Age International

Page : 63 pages

File Size : 21,10 MB

Release : 2009

Category : Structural dynamics

ISBN : 8122422306

Get eBook

Book Description

About the Book: STRUCTURAL DYNAMICS OF TURBO-MACHINES presents a detailed and comprehensive treatment of structural vibration evaluation of turbo-machines. Starting with the fundamentals of the theory of vibration as related to various aspects of rotating machines, the dynamic analysis procedures of a broad spectrum of turbo-machines is covered. An in-depth procedure for analyzing the torsional and flexural oscillations of the components and of the rotor-bearing system is presented. The latest trends in design and analysis are presented, chief among them: Blade and coupled disk-blade mod.



Advances in Mechanism and Machine Science

Author : Tadeusz Uhl

Publisher : Springer

Page : 4203 pages

File Size : 16,37 MB

Release : 2019-06-13

Category : Technology & Engineering

ISBN : 3030201317

Get eBook

Book Description

This book gathers the proceedings of the 15th IFToMM World Congress, which was held in Krakow, Poland, from June 30 to July 4, 2019. Having been organized every four years since 1965, the Congress represents the world’s largest scientific event on mechanism and machine science (MMS). The contributions cover an extremely diverse range of topics, including biomechanical engineering, computational kinematics, design methodologies, dynamics of machinery, multibody dynamics, gearing and transmissions, history of MMS, linkage and mechanical controls, robotics and mechatronics, micro-mechanisms, reliability of machines and mechanisms, rotor dynamics, standardization of terminology, sustainable energy systems, transportation machinery, tribology and vibration. Selected by means of a rigorous international peer-review process, they highlight numerous exciting advances and ideas that will spur novel research directions and foster new multidisciplinary collaborations.



Radial Flow Turbocompressors

Author : Michael Casey

Publisher : Cambridge University Press

Page : 789 pages

File Size : 46,23 MB

Release : 2021-06-10

Category : Science

ISBN : 1108416675

Get eBook

Book Description

An introduction to the theory and engineering practice that underpins the component design and analysis of radial flow turbocompressors. Drawing upon an extensive theoretical background and years of practical experience, the authors provide descriptions of applications, concepts, component design, analysis tools, performance maps, flow stability, and structural integrity, with illustrative examples. Features wide coverage of all types of radial compressor over many applications unified by the consistent use of dimensional analysis. Discusses the methods needed to analyse the performance, flow, and mechanical integrity that underpin the design of efficient centrifugal compressors with good flow range and stability. Includes explanation of the design of all radial compressor components, including inlet guide vanes, impellers, diffusers, volutes, return channels, de-swirl vanes and side-streams. Suitable as a reference for advanced students of turbomachinery, and a perfect tool for practising mechanical and aerospace engineers already within the field and those just entering it.



Proceedings of the 10th International Conference on Rotor Dynamics – IFToMM

Author : Katia Lucchesi Cavalca

Publisher : Springer

Page : 550 pages

File Size : 28,12 MB

Release : 2018-08-18

Category : Technology & Engineering

ISBN : 3319992708

Get eBook

Book Description

IFToMM conferences have a history of success due to the various advances achieved in the field of rotor dynamics over the past three decades. These meetings have since become a leading global event, bringing together specialists from industry and academia to promote the exchange of knowledge, ideas, and information on the latest developments in the dynamics of rotating machinery. The scope of the conference is broad, including e.g. active components and vibration control, balancing, bearings, condition monitoring, dynamic analysis and stability, wind turbines and generators, electromechanical interactions in rotor dynamics and turbochargers. The proceedings are divided into four volumes. This third volume covers the following main topics: dynamic analysis and stability; electromechanical interactions in rotordynamics; nonlinear phenomena in rotordynamics; rotordynamics of micro, nano and cryogenic machines; and fluid structure interactions in rotordynamics.