Best Practices in Physics-based Fault Rupture Models for Seismic Hazard Assessment of Nuclear Installations


Book Description

This volume collects several extended articles from the first workshop on Best Practices in Physics-based Fault Rupture Models for Seismic Hazard Assessment of Nuclear Installations (BestPSHANI). Held in 2015, the workshop was organized by the IAEA to disseminate the use of physics-based fault-rupture models for ground motion prediction in seismic hazard assessments (SHA). The book also presents a number of new contributions on topics ranging from the seismological aspects of earthquake cycle simulations for source scaling evaluation, seismic source characterization, source inversion and physics-based ground motion modeling to engineering applications of simulated ground motion for the analysis of seismic response of structures. Further, it includes papers describing current practices for assessing seismic hazard in terms of nuclear safety in low seismicity areas, and proposals for physics-based hazard assessment for critical structures near large earthquakes. The papers validate and verify the models by comparing synthetic results with observed data and empirical models. The book is a valuable resource for scientists, engineers, students and practitioners involved in all aspects of SHA.




Diffuse Seismicity in Seismic Hazard Assessment for Site Evaluation of Nuclear Installations


Book Description

Diffuse seismicity refers to earthquakes occurring in locations where no apparent correlation can be made with any causative faults. This publication provides guidance for addressing the seismic hazard from diffuse seismicity in a manner consistent with internationally recognized practices and with reference to relevant IAEA safety standards.




Seismic Risk Analysis of Nuclear Power Plants


Book Description

Seismic Risk Analysis of Nuclear Power Plants addresses the needs of graduate students in engineering, practicing engineers in industry, and regulators in government agencies, presenting the entire process of seismic risk analysis in a clear, logical, and concise manner. It offers a systematic and comprehensive introduction to seismic risk analysis of critical engineering structures focusing on nuclear power plants, with a balance between theory and applications, and includes the latest advances in research. It is suitable as a graduate-level textbook, for self-study, or as a reference book. Various aspects of seismic risk analysis - from seismic hazard, demand, and fragility analyses to seismic risk quantification, are discussed, with detailed step-by-step analysis of specific engineering examples. It presents a wide range of topics essential for understanding and performing seismic risk analysis, including engineering seismology, probability theory and random processes, digital signal processing, structural dynamics, random vibration, and engineering risk and reliability.




Seismic Hazard Assessment in Site Evaluation for Nuclear Installations


Book Description

Provides the state-of-the-art practice and detailed technical elements related to ground motion evaluation by ground motion prediction equations (GMPEs) and site response in the context of seismic hazard assessments as recommended in IAEA Safety Standards Series No. SSG-9, Seismic Hazards in Site Evaluation for Nuclear Installations.




Ground Motion Simulation Based on Fault Rupture Modelling for Seismic Hazard Assessment in Site Evaluation for Nuclear Installations


Book Description

Explaining the principles that underlie strong ground motion simulation, this publication describes various methods for simulating strong ground motions, and presents some examples of strong ground motion simulations using fault rupture modelling. The detailed guidelines and practical tools presented in this Safety Report will be of value to researchers, operating organizations, regulatory bodies, vendors and technical support organizations in the areas of seismic hazard evaluation of nuclear installations. The information provided will also be of great importance for seismic hazard assessments following the Fukushima Daiichi nuclear power plant accident.




Seismic Hazard and Risk Assessment


Book Description

This book contains the best contributions presented during the 6th National Conference on Earthquake Engineering and the 2nd National Conference on Earthquake Engineering and Seismology - 6CNIS & 2CNISS, that took place on June 14-17, 2017 in Bucharest - Romania, at the Romanian Academy and Technical University of Civil Engineering of Bucharest. The book offers an updated overview of seismic hazard and risk assessment activities, with an emphasis on recent developments in Romania, a very challenging case study because of its peculiar intermediate-depth seismicity and evolutive code-compliant building stock. Moreover, the book collects input of renowned scientists and professionals from Germany, Greece, Italy, Japan, Netherlands, Portugal, Romania, Spain, Turkey and United Kingdom.The content of the book focuses on seismicity of Romania, geotechnical earthquake engineering, structural analysis and seismic design regulations, innovative solutions for seismic protection of building structures, seismic risk evaluation, resilience-based assessment of structures and management of emergency situations. The sub-chapters consist of the best papers of 6CNIS & 2CNISS selected by the International Advisory and Scientific Committees. The book is targeted at researchers and experts in seismic hazard and risk, evaluation and rehabilitation of buildings and structures, insurers and re-insurers, and decision makers in the field of emergency situations and recovery activities.




Seismic Design for Nuclear Power Plants


Book Description

The development of protective measures to guard against the spread of radioactive debris following reactor disasters has been given extensive and careful engineering attention over the past several years. Much of this attention has been devoted to eliminating or minimizing the effects of malfunctions of internal components. But reactors can also suffer externally caused disasters—for example, their radioactive cores can be damaged by earthquakes or by missiles generated by tornadoes. Earthquakes in particular will continue to render man vulnerable even to the "peaceful atom" as the number of nuclear power plants increases and as they come to be located in those parts of the world that have a history of seismic activity. It was to consider such problems that the seminar reported here was held. The conferees, who are leaders in this special and important field, gathered in Cambridge, Massachusetts, in spring 1969, to present the papers whose titles are listed below. Together they cover both the theoretical underpinnings of the subject and specific applications to nuclear reactors; they provide both useful summaries of what is known to date and some new thinking on the subject, not before published. Contents: Preface—T. J. Thompson. Foreword—R. J. Hansen. Introduction—R. V. Whitman. Geological and Seismological Factors Influencing the Assessment of a Seismic Threat to Nuclear Reactors—Daniel Linehan, S. J. Geophysics—Keiiti Aki. Design Seismic Inputs—C. Allin Cornell. Some Observations on Probabilistic Methods in the Seismic Design of Nuclear Power Plants—C. Allin Cornell. Seismic Risk and Seismic Design Decisions—Luis Esteva. Fundamentals of Soil Amplification—J. M. Roesset. Soil Structure Interaction—R. V. Whitman. Evaluation of Soil Properties for Site Evaluation and Dynamic Analysis of Nuclear Plants—R. V. Whitman. Structural Response to Seismic Input—J. M. Biggs. Seismic Analysis of Equipment Mounted on a Massive Structure—J. M. Biggs and J. M. Roesset. Modal Response of Containment Structures—Peter Jan Pahl. Provision of Required Seismic Resistance—M. J. Holley, Jr. A Measure of Earthquake Intensity—Arturo Arias. Closure—R. J. Hansen.




Seismic Hazards in Site Evaluation for Nuclear Installations


Book Description

This Safety Guide supersedes the 2010 edition of IAEA Safety Standards Series No. SSG-9. It takes account of recently gained knowledge and practices developed by Member States related to seismic hazards, especially lessons from the Fukushima Daiichi accident. It also addresses concomitant events associated with earthquakes, such as tsunamis. The revision provides a clearer separation between the process for assessing the seismic hazards at a specific nuclear installation site and the process for defining the related basis for design and safety assessment of the nuclear installation. Thus, it bridges gaps and avoids undue overlap of the two processes, which correspond to and are performed at different stages of siting of the nuclear installation.




An Introduction to Probabilistic Fault Displacement Hazard Analysis in Site Evaluation for Existing Nuclear Installations


Book Description

Probabilistic fault displacement hazard analysis (PFDHA) is a relatively new methodology, and actual examples of applications are quite limited. The current publication provides an introduction to probabilistic approaches to fault displacement hazard assessment with reference to relevant IAEA safety standards. It delineates the most important aspects of PFDHA (including up to date practices, open problems, and challenging issues) within a coherent framework. The information provided will be valuable not only for Member States when applying PFDHA to the site safety assessment of existing installations, but also for nuclear power plant operating organizations, regulatory bodies, vendors, technical support organizations and researchers working in the area of seismic hazard assessment.