Reservoir Geomechanics


Book Description

This interdisciplinary book encompasses the fields of rock mechanics, structural geology and petroleum engineering to address a wide range of geomechanical problems that arise during the exploitation of oil and gas reservoirs. It considers key practical issues such as prediction of pore pressure, estimation of hydrocarbon column heights and fault seal potential, determination of optimally stable well trajectories, casing set points and mud weights, changes in reservoir performance during depletion, and production-induced faulting and subsidence. The book establishes the basic principles involved before introducing practical measurement and experimental techniques to improve recovery and reduce exploitation costs. It illustrates their successful application through case studies taken from oil and gas fields around the world. This book is a practical reference for geoscientists and engineers in the petroleum and geothermal industries, and for research scientists interested in stress measurements and their application to problems of faulting and fluid flow in the crust.




Geothermal Reservoir Engineering


Book Description

As nations alike struggle to diversify and secure their power portfolios, geothermal energy, the essentially limitless heat emanating from the earth itself, is being harnessed at an unprecedented rate. For the last 25 years, engineers around the world tasked with taming this raw power have used Geothermal Reservoir Engineering as both a training manual and a professional reference. This long-awaited second edition of Geothermal Reservoir Engineering is a practical guide to the issues and tasks geothermal engineers encounter in the course of their daily jobs. The book focuses particularly on the evaluation of potential sites and provides detailed guidance on the field management of the power plants built on them. With over 100 pages of new material informed by the breakthroughs of the last 25 years, Geothermal Reservoir Engineering remains the only training tool and professional reference dedicated to advising both new and experienced geothermal reservoir engineers. - The only resource available to help geothermal professionals make smart choices in field site selection and reservoir management - Practical focus eschews theory and basics- getting right to the heart of the important issues encountered in the field - Updates include coverage of advances in EGS (enhanced geothermal systems), well stimulation, well modeling, extensive field histories and preparing data for reservoir simulation - Case studies provide cautionary tales and best practices that can only be imparted by a seasoned expert




Proceedings


Book Description







Geothermal Well Test Analysis


Book Description

Geothermal Well Test Analysis: Fundamentals, Applications and Advanced Techniques provides a comprehensive review of the geothermal pressure transient analysis methodology and its similarities and differences with petroleum and groundwater well test analysis. Also discussed are the different tests undertaken in geothermal wells during completion testing, output/production testing, and the interpretation of data. In addition, the book focuses on pressure transient analysis by numerical simulation and inverse methods, also covering the familiar pressure derivative plot. Finally, non-standard geothermal pressure transient behaviors are analyzed and interpreted by numerical techniques for cases beyond the limit of existing analytical techniques. - Provides a guide on the analysis of well test data in geothermal wells, including pressure transient analysis, completion testing and output testing - Presents practical information on how to avoid common issues with data collection in geothermal wells - Uses SI units, converting existing equations and models found in literature to this unit system instead of oilfield units




Geothermal Energy Update


Book Description




Geothermal Reservoir Engineering


Book Description

During the oil crisis of 1973, we suddenly became aware that fossil fuel resources are limited and will be exhausted soon if new alternatives are not put into use immediately. Conservation measures and extensive research on new sources of energy has eased the demand on fossil fuels, especially crude oil. Geothermal energy as an alternative; source had its share in this devel opment and electricity producing capacity increased from 700 to 4700 MWe during 1970 to 1985. Geothermal reservoir engineering emerged as an impor tant field in the assessment of geothermal sources. During the 25 years of its development, several areas were identified that needed further at tention for the correct description and interpretation of reservoir be havior. This fact as accepted by all operators is vital for the steady and continuous operation of power plants. During this NATO ASI, a detailed review of theory and field case his tories on geothermal reservoir engineering was presented. In understanding .the reservoir, conceptual models, natural state models, well bore measure ments, transient and tracer testing provide data which are indispensable. They are powerful tools in understanding reservoir behavior provided we know how to interpret them. During lectures the theory and practical applications of these interpretive methods were discussed.




Heat Exchangers


Book Description

Selecting and bringing together matter provided by specialists, this project offers comprehensive information on particular cases of heat exchangers. The selection was guided by actual and future demands of applied research and industry, mainly focusing on the efficient use and conversion energy in changing environment. Beside the questions of thermodynamic basics, the book addresses several important issues, such as conceptions, design, operations, fouling and cleaning of heat exchangers. It includes also storage of thermal energy and geothermal energy use, directly or by application of heat pumps. The contributions are thematically grouped in sections and the content of each section is introduced by summarising the main objectives of the encompassed chapters. The book is not necessarily intended to be an elementary source of the knowledge in the area it covers, but rather a mentor while pursuing detailed solutions of specific technical problems which face engineers and technicians engaged in research and development in the fields of heat transfer and heat exchangers.




Geothermal Energy Systems


Book Description

Geothermal Energy Systems The book encounters basic knowledge about geothermal technology for the utilization of geothermal resources. The book helps to understand the basic geology needed for the utilization of geothermal energy, shows up the practice to make access to geothermal reservoirs by drilling and the engineering of the reservoir by enhancing methods. The book describes the technology to make use of the Earth?s heat for direct use, power, and/or chill and gives boundary conditions for its economic and environmental utilization. A special focus is made on enhanced or engineered geothermal systems (EGS) which are based on concepts which bring a priori less productive reservoirs to an economic use. From the contents: Reservoir Definition Exploration Methods Drilling into Geothermal Reservoirs Enhancing Geothermal Reservoirs Geothermal Reservoir Simulation Energetic Use of EGS Reservoirs Economic Performance and Environmental Assessment Deployment of Enhanced Geothermal Systems plants and CO2-mitigation