Masters Theses in the Pure and Applied Sciences


Book Description

Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 38 (thesis year 1993) a total of 13,787 thesis titles from 22 Canadian and 164 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 38 reports theses submitted in 1993, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.




Masters Theses in the Pure and Applied Sciences


Book Description

Cited in Sheehy, Chen, and Hurt . Volume 38 (thesis year 1993) reports a total of 13,787 thesis titles from 22 Canadian and 164 US universities. As in previous volumes, thesis titles are arranged by discipline and by university within each discipline. Any accredited university or college with a grad




Ceramic Abstracts


Book Description




Physics Briefs


Book Description







Metals Abstracts


Book Description










The Manipulation of Air-Sensitive Compounds


Book Description

Revised to reflect the continuing and growing importance of research and development within this field, The Manipulation of Air-Sensitive Compounds, 2nd Edition offers state-of-the-art methods used in handling air-sensitive compounds, including gases. Part One covers inert atmosphere techniques, while Part Two treats vacuum line techniques. Appendixes provide safety data, information on materials used to construct apparatus, and a table of vapor pressures of common volatile substances.




Silicon Nitride for Microelectronic Applications


Book Description

The large amount of literature on the technology of thin film silicon nitride indi cates the interest of the Department of Defense, NASA and the semiconductor industry in the development and full utilization of the material. This survey is concerned only with the thin film characteristics and properties of silicon nitride as currently utilized by the semiconductor or microelectronics industry. It also includes the various methods of preparation. Applications in microelectronic devices and circuits are to be provided in Part 2 of the survey. Some bulk silicon nitride property data is included for basic reference and comparison purposes. The survey specifically excludes references and information not within the public domain. ACKNOWLEDGEMENT This survey was generated under U.S. Air Force Contract F33615-70-C-1348, with Mr. B.R. Emrich (MAAM) Air Force Materials Laboratory, Wright-Patterson Air Force Base, Ohio acting as Project Engineer. The author would like to acknowledge the assis tance of Dr. Judd Q. Bartling, Litton Systems, Inc., Guidance and Control Systems Division, Woodland Hills, California and Dr. Thomas C. Hall, Hughes Aircraft Company, Culver City, California in reviewing the survey. v CONTENTS Preface. i Introduction 1 Literature Review. 1 Bulk Characteristics 1 Technology Overview. 2 References 4 Methods of Preparation • 5 Introduction • 5 Direct Nitridation Method 8 Evaporation Method • 9 Glow Discharge Method. 10 Ion Beam Method. 13 Sputtering Methods 13 Pyrolytic Methods. 15 Silane and Ammonia Reaction 15 Silicon Tetrachloride and Tetrafluoride Reaction. 24 Silane and Hydrazine Reaction 27 Production Operations. 28 Equipment.