Systems, Decision and Control in Energy II


Book Description

This book examines the problems in the field of energy and related fields (chemical, transport, aerospace, construction, metallurgy, engineering, etc.) and consists of 4 subsections: Electrical Engineering, Heat Power Engineering, Cybersecurity and Computer Science & Environmental Safety. In the first section, authors pay attention to contemporary issues related to the development of the electric power industry, electrical engineering, the physics of electrical phenomena and renewable energy sources (such as solar energy and wind energy). The second section is devoted to modern problems in heat power engineering and considers modern means and methods that increase the efficiency and reliability of the functioning of heat power facilities. The third section is devoted to issues of cybersecurity of critical facilities, in particular energy facilities, as well as the development of computer science and the introduction of modern information and measurement systems in the energy sector. The fourth subsection deals with the problems of rational use of natural resources, accounting for emissions of harmful substances, environmental issues at energy facilities, as well as the development of a methodology for environmental safety. The book includes 21 chapters. A book is for researchers, engineers, as well as lecturers and postgraduates of higher education institutions dealing with issues of control, diagnosis and monitoring of energy facilities.




Systems, Decision and Control in Energy III


Book Description

This book describes new energy saving methods and technologies for heat power engineering. The book is devoted to topical issues of energy and related industries. Leading Ukrainian scientists from both scientific institutes and educational universities took part in its creation. The research results are presented in 6 parts: electrical engineering, heat power engineering, nuclear power engineering, fossil fuels, cybersecurity and computer science, environmental safety. Results of regulating of operating modes and applicability of model checking technique in power systems are showed. Separate block of questions regarding the functioning of nuclear power plants, their waste and preventive measures of protection against negative effects on living organisms (including, for example, the Chernobyl nuclear power plant) is considered. The results of the peculiarities of the extraction, purification and use of fossil fuels are presented. In some chapters, presented the results on improving the cybersecurity of energy systems and its resilience to various threats, including the use of 5G technology. Traditionally for this series, issues of ecological safety, the impact of different energy systems on the environment and its protection are considered. A book is for researchers, engineers, as well as lecturers and postgraduates of higher education institutions dealing with energy sector, power systems, ecological safety, etc.







Systems, Decision and Control in Energy V


Book Description

The book consists of 8 parts: Energy Informatics, Electric Power Engineering, Heat Power Engineering, Nuclear Power Engineering, Renewable Power Engineering, Fuels, Transport, and Environmental Safety. The results presented in this book are aimed at solving some of the technical issues proposed by the Ukraine Recovery Plan and other important scientific and applied problems in the field of energy. Scientists from leading Ukrainian academic institutions and universities are working on this book. This book is for scientists, researchers, engineers, as well as lecturers and postgraduates of higher education institutions dealing with energy sector, power systems, ecological safety, etc.




Systems, Decision and Control in Energy IV


Book Description

In recent years, the scale of environmental hazards has been growing, emergencies occur more often at special facilities, in particular nuclear power, the largest of which was the accident at the Chernobyl nuclear power plant in Ukraine on April 26, 1986. With the advent of nuclear power, it was believed that nuclear power reactors were safe enough, control and monitoring systems, protective screens and trained personnel would guarantee their trouble-free operation. There is also a trend now that nuclear power is "environmentally friendly" because it provides a reduction in greenhouse gas emissions with replacing power plants working on fossil fuels. Some countries, such as the United States, have recently classified nuclear energy as a renewable energy source. Despite this, nuclear power is potentially dangerous due to: - possible accidents at power plants, accompanied by the ejection of radioactive materials into the environment; - ejections of about 250 radioactive isotopes into the environment as a result of the operation of nuclear reactors; - emissions of 85Kr, which changes the electrical conductivity of the atmosphere. This gas behaves like a greenhouse gas in the atmosphere, thereby contributing to anthropogenic climate change on Earth; - pollution of the biosphere with plutonium; - radioactive waste is the most important cause of environmental hazard, which remains unresolved. Civilian nuclear power reactors operating throughout the world annually generate large amounts of low-, medium- and high-level radioactive waste. Radioactive pollution accompanies all parts of the complex production of nuclear energy: the extraction and processing of uranium, the operation of nuclear power plants, the storage and regeneration of fuel, which has a significant impact on the environmental friendliness of nuclear energy. In addition, up to 300 natural and technogenic emergencies are registered annually, as a result of which people die and great economic damage is caused. The main reasons for the occurrence of technogenic accidents and catastrophes and the strengthening of the negative impact due to the occurrence of natural and technogenic emergencies in Ukraine are: obsolete fixed assets, in particular for environmental purposes; large volume of transportation, storage and use of hazardous substances; the emergency state of a significant part of public utility networks; insufficient investment support for the process of introducing the latest resource-saving and environmentally friendly technologies in environmentally hazardous industries, primarily in the metallurgical, chemical, petrochemical and energy sectors; environmental problems associated with significant changes in the state of the geological and hydrogeological environment and caused by the closure of unprofitable mining enterprises and mines; unwillingness of economic subjects to take measures to prevent accidents and catastrophes at high-risk and potentially hazardous facilities.







Geomining


Book Description




Control of Overhead Power Lines with Unmanned Aerial Vehicles (UAVs)


Book Description

This book is devoted to the development of complex methods and means of their implementation with using UAVs aimed for improving the safety and efficiency of the energy system. The scientific problem of complex automated monitoring of the energy system objects with using UAVs has been solved, including the control of its elements in the visible and infrared range, the acoustic spectrum, as well as by the levels of the electric field strength. The scientific foundations of mathematical, physical and statistical modeling of electromagnetic and acoustic fields in the elements of electric power objects of complex spatial configurations have been created, taking into account the possibility of the appearance of such nonlinear processes as corona discharges and breakdowns at long air gaps. Improved methods are proposed for determining the exact location of accidents on power lines using UAVs on the basis of the developed mathematical models and the obtained analytical expressions. Conceptual foundations for the creation of methods and means for monitoring the state of insulation, lightning protection systems and the integrity of the structures of electric power facilities with using UAVs have been formed.




Models and Measures in Measurements and Monitoring


Book Description

This book examines modern methods of creating models and measures in measurements, physical and probabilistic measures, models, spaces and bases of signals and fields, deterministic and probabilistic models and measures of angular quantities. Examples of their use on a circle and in phase measurements are given; models and measures for diagnostics in the electric power industry, in standardless measurements of the characteristics of composite materials, in environmental pollution monitoring systems, also with using unmanned aerial vehicles, are considered. Most of the presented results were obtained on the basis of the Institute of Engineering Thermophysics of National Academy of Sciences of Ukraine. The book is intended for researchers, engineers, as well as lecturers, graduate students and students of higher educational institutions dealing with the problems of measurements, monitoring and diagnostics of complex technical objects.




Power Systems Research and Operation


Book Description

This book covers new technologies and methods related to models for short-term forecasting of electricity imbalances in the IPS of Ukraine, taking into account the impact of forecasts of energy production from renewable sources on the accuracy of the imbalance forecast. The book proposed architecture and mathematical model of an artificial neural network for deep learning forecasting of short-term electricity imbalances using hourly data. Using a model to aggregate data with an hourly resolution followed by forecasting to reduce forecast error, the quasi-dynamic modeling method was used to analyze the impact of periodic generation on the network. The application of quasi-dynamic modeling also allows taking into account the system load curve, generation profile, storage system, as well as renewable energy sources (RES) operation in this area. The use of models makes it possible to achieve realistic estimates of generation for the required period. The book considers a local hybrid renewable energy system (HRES) based on different types of RES, which is more efficient than a system with one type of source.