Technologies for Upgrading Existing or Designing New Drinking Water


Book Description

This book discusses drinking water treatment technologies that address contaminants and contaminant categories regulated under the Safe Drinking Water Act and its 1986 amendments. It covers both established and emerging technologies needed to comply with the new regulations of 1986 amendment.







Upgrading Existing Or Designing New Drinking Water Treatment Facilities


Book Description

Describes technologies for upgrading existing or designing new drinking water treatment facilities. Prefiltration, filtration, disinfection, and organic and inorganic contaminants are covered. Particular solutions for small community water treatment plants (2500-100,000 gpd) are described, along with 13 "case studies".







Technologies for Upgrading Existing or Designing New Drinking Water


Book Description

This book discusses drinking water treatment technologies that address contaminants and contaminant categories regulated under the Safe Drinking Water Act and its 1986 amendments. It covers both established and emerging technologies needed to comply with the new regulations of 1986 amendment.




Upgrading Water Treatment Plants


Book Description

Upgrading Water Treatment Plants is a comprehensive and practical guide providing the technical detail required to upgrade existing water treatment plants to increase processing efficiency and improve overall quality without the need for substantial investment into new physical plant installation. Based on practical experience and field tested methodology, this book is an invaluable reference for civil engineers, treatment plant managers and water scientists in consultancies, water utilities, government agencies and international organisations concerned with public health and water quality.




Flotation Technology


Book Description

The past 30 years have seen the emergence of a growing desire worldwide that positive actions be taken to restore and protect the environment from the degrading effects of all forms of pollution – air, water, soil, and noise. Since pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unreal- tic demand for zero waste. However, as long as waste continues to exist, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been identi?ed: (1) How serious is the pollution? (2) Is the technology to abate it available? and (3) Do the costs of abatement justify the degree of abatement achieved? This book is one of the volumes of the Handbook of Environmental Engineering series. The principal intention of this series is to help readers formulate answers to the last two questions above. The traditional approach of applying tried-and-true solutions to speci?c pollution p- blems has been a major contributing factor to the success of environmental engineering and has accounted in large measure for the establishment of a “methodology of pollution control. ” However, the realization of the ever-increasing complexity and interrelated nature of current environmental problems renders it imperative that intelligent planning of pollution abatement systems be undertaken.




Advanced Physicochemical Treatment Technologies


Book Description

In Advanced Physiochemical Treatment Technologies, leading pollution control educators and practicing professionals describe how various combinations of different cutting-edge process systems can be arranged to solve air, noise, and thermal pollution problems. Each chapter discusses in detail the three basic forms in which pollutants and waste are manifested: gas, solid, and liquid. There is an extensive collection of design examples and case histories.




Handbook of Public Water Systems


Book Description

Public water systems deliver high-quality water to the public. They also present a vast array of problems, from pollution monitoring and control to the fundamentals of hydraulics and pipe fitting.




Technology Transfer


Book Description