Author : Robert A. Street
Publisher : Springer Science & Business Media
Page : 429 pages
File Size : 23,40 MB
Release : 2013-06-29
Category : Technology & Engineering
ISBN : 3662041413
This book gives the first systematic and complete survey of technology and application of amorphous silicon, a material with a huge potential in electronic applications. The book features contributions by world-wide leading researchers in this field.
Author : Arun Madan
Publisher : Elsevier
Page : 558 pages
File Size : 44,16 MB
Release : 2012-12-02
Category : Science
ISBN : 0080924433
This comprehensive, detailed treatise on the physics and applications of the new emerging technology of amorphous semiconductors focuses on specific device research problems such as the optimization of device performance. The first part of the book presents hydrogenated amorphous silicon type alloys, whose applications include inexpensive solar cells, thin film transistors, image scanners, electrophotography, optical recording and gas sensors. The second part of the book discusses amorphous chalcogenides, whose applications include electrophotography, switching, and memory elements. This book will serve as an excellent reference source for solid state scientists and engineers, and as a useful self-contained introduction to the field for graduate students.
Author : R. A. Street
Publisher : Cambridge University Press
Page : 432 pages
File Size : 28,43 MB
Release : 2005-09-08
Category : Technology & Engineering
ISBN : 9780521019347
Divided roughly into two parts, the book describes the physical properties and device applications of hydrogenated amorphous silicon. The first section is concerned with the atomic and electronic structure, and covers growth defects and doping and defect reactions. The emphasis is on the optical and electronic properties that result from the disordered structure. The second part of the book describes electronic conduction, recombination, interfaces, and multilayers. The special attribute of a-Si:H which makes it useful is the ability to deposit the material inexpensively over large areas, while retaining good semiconducting properties, and the final chapter discusses various applications and devices.
Author : Arvind Shah
Publisher : EPFL Press
Page : 472 pages
File Size : 27,37 MB
Release : 2010-08-19
Category : Technology & Engineering
ISBN : 9781420066746
Photovoltaic technology has now developed to the extent that it is close to fulfilling the vision of a "solar-energy world," as devices based on this technology are becoming efficient, low-cost and durable. This book provides a comprehensive treatment of thin-film silicon, a prevalent PV material, in terms of its semiconductor nature, starting out with the physical properties, but concentrating on device applications. A special emphasis is given to amorphous silicon and microcrystalline silicon as photovoltaic materials, along with a model that allows these systems to be physically described in the simplest manner possible, thus allowing the student or scientist/engineer entering the field of thin-film electronics to master a few basic concepts that are distinct from those in the field of conventional semiconductors. The main part of the book deals with solar cells and modules by illustrating the basic functioning of these devices, along with their limitations, design optimization, testing and fabrication methods. Among the manufacturing processes discussed are plasma-assisted and hot-wire deposition, sputtering, and structuring techniques.
Author : Wilfried G. J. H. M. van Sark
Publisher : Springer Science & Business Media
Page : 588 pages
File Size : 27,97 MB
Release : 2011-11-16
Category : Technology & Engineering
ISBN : 3642222757
Today’s solar cell multi-GW market is dominated by crystalline silicon (c-Si) wafer technology, however new cell concepts are entering the market. One very promising solar cell design to answer these needs is the silicon hetero-junction solar cell, of which the emitter and back surface field are basically produced by a low temperature growth of ultra-thin layers of amorphous silicon. In this design, amorphous silicon (a-Si:H) constitutes both „emitter“ and „base-contact/back surface field“ on both sides of a thin crystalline silicon wafer-base (c-Si) where the electrons and holes are photogenerated; at the same time, a-Si:H passivates the c-Si surface. Recently, cell efficiencies above 23% have been demonstrated for such solar cells. In this book, the editors present an overview of the state-of-the-art in physics and technology of amorphous-crystalline heterostructure silicon solar cells. The heterojunction concept is introduced, processes and resulting properties of the materials used in the cell and their heterointerfaces are discussed and characterization techniques and simulation tools are presented.
Author : Pio Capezzuto
Publisher : Elsevier
Page : 339 pages
File Size : 35,19 MB
Release : 1995-10-10
Category : Science
ISBN : 0080539106
Semiconductors made from amorphous silicon have recently become important for their commercial applications in optical and electronic devices including FAX machines, solar cells, and liquid crystal displays. Plasma Deposition of Amorphous Silicon-Based Materials is a timely, comprehensive reference book written by leading authorities in the field. This volume links the fundamental growth kinetics involving complex plasma chemistry with the resulting semiconductor film properties and the subsequent effect on the performance of the electronic devices produced. - Focuses on the plasma chemistry of amorphous silicon-based materials - Links fundamental growth kinetics with the resulting semiconductor film properties and performance of electronic devices produced - Features an international group of contributors - Provides the first comprehensive coverage of the subject, from deposition technology to materials characterization to applications and implementation in state-of-the-art devices
Author : M.F. Thorpe
Publisher : Springer Science & Business Media
Page : 451 pages
File Size : 25,64 MB
Release : 2012-12-06
Category : Science
ISBN : 9401009147
The aim of this NATO ASI has been to present an up-to-date overview of current areas of interest in amorphous materials, with particular emphasis on electronic properties and device applications. In order to limit the material to a manageable amount, the meeting was concerned almost exclusively with semiconducting materials. This volume should be regarded as a follow-on to the NATO ASI held in Sozopol, Bulgaria in 1996 and published as "Amorphous Insulators and Semiconductors" edited by M.F. Thorpe and M.1. Mitkova (Kluwer Academic Publishers, NATO ASI series, 3 High Technology - Vol. 23). The lectures and seminars fill the gap between graduate courses and research seminars. The lecturers and seminar speakers were chosen as experts in their respective areas, and the lectures and seminars that were given are presented in this volume. During the first week of the meeting, an emphasis was placed on introductory lectures while the second week focused more on research seminars. There were two very good poster sessions that generated a lot of discussion, but these are not reproduced in this volume as the editors wanted to have only larger contributions to make the proceedings more coherent.
Author : Christoph Richter
Publisher : Springer
Page : 744 pages
File Size : 14,54 MB
Release : 2012-11-29
Category : Science
ISBN : 9781461458050
Gathering some 30 entries from the Encyclopedia of Sustainability Science and Technology, this book presents fundamental principles and technologies for sustainably harnessing solar energy. Covers photovoltaics, solar thermal energy, solar radiation and more.
Author : Stephen E. Saddow
Publisher : Elsevier
Page : 370 pages
File Size : 33,18 MB
Release : 2022-07-13
Category : Technology & Engineering
ISBN : 0323908268
After over two decades of focused research and development, silicon carbide (SiC) is now ready for use in the healthcare sector and Silicon Carbide Technology for Advanced Human Healthcare Applications provides an up-to-date assessment of SiC devices for long-term human use. It explores a plethora of applications that SiC is uniquely positioned for in human healthcare, beginning with the three primary areas of technology which are closest to human trials and thus adoption in the healthcare industry: neural implants and spinal cord repair, graphene and biosensors, and finally deep tissue cancer therapy using SiC nanotechnology. Biomedical-inspired engineers, scientists, and healthcare professionals will find this book to be very useful in two ways: (I) as a guide to new ways to design and develop advanced medical devices and (II) as a reference for new developments in the field. The book's intent is to stimulate ideas for further technological enhancements and breakthroughs, which will provide alternative solutions for human healthcare applications. - Discusses the utilization of SiC materials for biomedical applications - Provides a logical pathway to understand why SiC is ideal for several critical applications, in particular for long-term implantable devices, and will serve as a guide to new ways to design and develop advanced medical devices - Serves as a reference for new developments in the field and as a technology resource for medical doctors and practitioners looking to identify and implement advanced engineering solutions to everyday medical challenges that currently lack long-term, cost-effective solutions
Author : S.D. Brotherton
Publisher : Springer Science & Business Media
Page : 467 pages
File Size : 23,1 MB
Release : 2013-04-16
Category : Technology & Engineering
ISBN : 3319000020
Introduction to Thin Film Transistors reviews the operation, application and technology of the main classes of thin film transistor (TFT) of current interest for large area electronics. The TFT materials covered include hydrogenated amorphous silicon (a-Si:H), poly-crystalline silicon (poly-Si), transparent amorphous oxide semiconductors (AOS), and organic semiconductors. The large scale manufacturing of a-Si:H TFTs forms the basis of the active matrix flat panel display industry. Poly-Si TFTs facilitate the integration of electronic circuits into portable active matrix liquid crystal displays, and are increasingly used in active matrix organic light emitting diode (AMOLED) displays for smart phones. The recently developed AOS TFTs are seen as an alternative option to poly-Si and a-Si:H for AMOLED TV and large AMLCD TV applications, respectively. The organic TFTs are regarded as a cost effective route into flexible electronics. As well as treating the highly divergent preparation and properties of these materials, the physics of the devices fabricated from them is also covered, with emphasis on performance features such as carrier mobility limitations, leakage currents and instability mechanisms. The thin film transistors implemented with these materials are the conventional, insulated gate field effect transistors, and a further chapter describes a new thin film transistor structure: the source gated transistor, SGT. The driving force behind much of the development of TFTs has been their application to AMLCDs, and there is a chapter dealing with the operation of these displays, as well as of AMOLED and electrophoretic displays. A discussion of TFT and pixel layout issues is also included. For students and new-comers to the field, introductory chapters deal with basic semiconductor surface physics, and with classical MOSFET operation. These topics are handled analytically, so that the underlying device physics is clearly revealed. These treatments are then used as a reference point, from which the impact of additional band-gap states on TFT behaviour can be readily appreciated. This reference book, covering all the major TFT technologies, will be of interest to a wide range of scientists and engineers in the large area electronics industry. It will also be a broad introduction for research students and other scientists entering the field, as well as providing an accessible and comprehensive overview for undergraduate and postgraduate teaching programmes.
