The Physics of Large Deformation of Crystalline Solids


Book Description

Historically, a major problem for the study of the large deformation of crystalline solids has been the apparent lack of unity in experimentally determined stress-strain functions. The writer's discovery in 1949 of the unexpectedly high velocity of incremental loading waves in pre-stressed large deformation fields emphasized to him the pressing need for the independent, systematic experimental study of the subject, to provide a firm foundation upon which physically plausible theories for the finite deformation of crystalline solids could be constructed. Such a study undertaken by the writer at that time and continued uninterruptedly to the present, led in 1956 to the development of the diffraction grating experiment which permitted, for the first time, the optically accurate determination of the strain-time detail of non-linear finite amplitude wave fronts propagating into crystalline solids whose prior history was precisely known. These experimental diffraction grating studies during the past decade have led to the discovery that the uniaxial stress-strain functions of 27 crystalline solids are unified in a single, generalized stress-strain function which is described, much of it hitherto unpublished, in the present monograph. The detailed study of over 2,000 polycrystal and single crystal uni axial stress experiments in 27 crystalline solids, in terms of the variation of a large number of pertinent parameters, has provided new unified pat terns of understanding which, it is hoped, will be of interest and value to theorists and experimentalists alike.




An Introduction to Composite Materials


Book Description

This edition has been greatly enlarged and updated to provide both scientists and engineers with a clear and comprehensive understanding of composite materials. In describing both theoretical and practical aspects of their production, properties and usage, the book crosses the borders of many disciplines. Topics covered include: fibres, matrices, laminates and interfaces; elastic deformation, stress and strain, strength, fatigue crack propagation and creep resistance; toughness and thermal properties; fatigue and deterioration under environmental conditions; fabrication and applications. Coverage has been increased to include polymeric, metallic and ceramic matrices and reinforcement in the form of long fibres, short fibres and particles. Designed primarily as a teaching text for final-year undergraduates in materials science and engineering, this book will also interest undergraduates and postgraduates in chemistry, physics, and mechanical engineering. In addition, it will be an excellent source book for academic and technological researchers on materials.




Anisotropy and Localization of Plastic Deformation


Book Description

Present developments in materials science, mechanics and engineering, as well as the demands of modern technology, result in a new and growing interest in plasticity and in bordering domains of the mechanical behavior of materials. This growing interest is attested to by the success of both The International Journal of Plasticity, which after its inception rapidly became the leading journal for plasticity research, and the series ofInternational Symposia on Plasticity and Its Current Applications, which is now the premier international forum for plasticity research dissemination. The First International Symposium on Plasticity and Its Current Applications was conceived and organized by Professor Akhtar S. Khan, and was held at the University of Oklahoma (Norman, Oklahoma, USA) from July 30 to August 3, 1984. It was attended by over one hundred scientists from fifteen countries. "Plasticity '89: the Second International Symposium on Plasticity and Its Current Applications" was held at Mie University (Tsu, Japan) from July 31 to August 4, 1989; this symposium was co-chaired by Professors Khan and Tokuda. The main emphasis of this meeting was on dynamic plasticity and micromechanics, although it included other aspects of plasticity as well. It was attended by over two hundred researchers from twenty-three nations.




Multiscale Modeling in Continuum Mechanics and Structured Deformations


Book Description

An updated account of the state of the art in the subject, presenting recent progress in two active and related areas of continuum mechanics: fracture mechanics and structured deformations.




Large Plastic Deformation of Crystalline Aggregates


Book Description

The book gives a comprehensive view of the present ability to take into account the microstructure and texture evolution in building up engineering models of the plastic behaviour of polycrystalline materials at large strains. It is designed for postgraduate students, research engineers and academics that are interested in using advanced models of the mechanical behaviour of polycrystalline materials.




Nonlinear Mechanics of Crystals


Book Description

This book describes behavior of crystalline solids primarily via methods of modern continuum mechanics. Emphasis is given to geometrically nonlinear descriptions, i.e., finite deformations. Primary topics include anisotropic crystal elasticity, plasticity, and methods for representing effects of defects in the solid on the material's mechanical response. Defects include crystal dislocations, point defects, twins, voids or pores, and micro-cracks. Thermoelastic, dielectric, and piezoelectric behaviors are addressed. Traditional and higher-order gradient theories of mechanical behavior of crystalline solids are discussed. Differential-geometric representations of kinematics of finite deformations and lattice defect distributions are presented. Multi-scale modeling concepts are described in the context of elastic and plastic material behavior. Representative substances towards which modeling techniques may be applied are single- and poly- crystalline metals and alloys, ceramics, and minerals. This book is intended for use by scientists and engineers involved in advanced constitutive modeling of nonlinear mechanical behavior of solid crystalline materials. Knowledge of fundamentals of continuum mechanics and tensor calculus is a prerequisite for accessing much of the text. This book could be used as supplemental material for graduate courses on continuum mechanics, elasticity, plasticity, micromechanics, or dislocation mechanics, for students in various disciplines of engineering, materials science, applied mathematics, and condensed matter physics.




Elastoplasticity Theory


Book Description

Understanding the elastoplastic deformation of metals and geomaterials, including the constitutive description of the materials and analysis of structure undergoing plastic deformation, is an essential part of the background required by mechanical, civil, and geotechnical engineers as well as materials scientists. However, most books address the su




Crystal Growth


Book Description

Crystal Growth, Second Edition deals with crystal growth methods and the relationships between them. The chemical physics of crystal growth is discussed, along with solid growth techniques such as annealing, sintering, and hot pressing; melt growth techniques such as normal freezing, cooled seed method, crystal pulling, and zone melting; solution growth methods; and vapor phase growth. This book is comprised of 15 chapters and opens with a bibliography of books and source material, highlighted by a classification of crystal growth techniques. The following chapters focus on the molecular state of a crystal when in equilibrium with respect to growth or dissolution; the fundamentals of classical and modern hydrodynamics as applied to crystal growth processes; creation, control, and measurement of the environment in which a crystal with desired properties can grow; and growth processes where transport occurs through the vapor phase. The reader is also introduced to crystal growth with molecular beam epitaxy; crystal pulling as a crystal growth method; and zone refining and its applications. This monograph will be of interest to physicists and crystallographers.




The Breadth and Depth of Continuum Mechanics


Book Description

This volume collects papers dedicated to Jerry Ericksen on his sixtieth birthday, December 20, 1984. They first appeared in Volumes 82-90 (1983-1985) of the Archive for Rational Mechanics and Analysis. At the request of the Editors the list of authors to be invited was drawn up by C. M. Dafermos, D. D. Joseph, and F. M. Leslie. The breadth and depth of the works here reprinted reflect the corresponding qualities in Jerry Ericksen's research, teaching, scholarship, and inspiration. His interests and expertness center upon the mechanics of materials and extend to everything that may contribute to it: pure analysis, algebra, geometry, through all aspects of theoretical mechanics to fundamental experiment, all of these illumi nated by an intimate and deep familiarity with the sources, even very old ones. He is independent of school and contemptuous of party spirit; his generosity in giving away his ideas is renowned, but not everyone is capable of accepting what is offered. His writings are totally free of broad claims and attributions beyond his own study. Some are decisive, some are prophetic, and all are forthright. His work has served as a beacon of insight and simple honesty in an age of ever more trivial and corrupt science. The authors of the memoirs in this volume are his students, colleagues, admirers, and (above all) his friends.




Mechanics Today


Book Description

Mechanics Today: Volume 1 is a collection of articles from researchers in the field of applied mechanics. The articles contained in this volume provide the fundamental, analytical and experimental results (where applicable) aspects of the subject matter being discussed. The book has chapters focusing on the dynamic effects in brittle fracture; qualitative theory of the ordinary differential equations of nonlinear elasticity; general variational principles for nonlinear, incremental, and linear elasticity; and the theory of viscometric flow. Physicists, engineers, metallurgists, materials scientists, and students of materials science and applied physics will find this text a good source of information.