2010 ADA Standards for Accessible Design


Book Description

(a) Design and construction. (1) Each facility or part of a facility constructed by, on behalf of, or for the use of a public entity shall be designed and constructed in such manner that the facility or part of the facility is readily accessible to and usable by individuals with disabilities, if the construction was commenced after January 26, 1992. (2) Exception for structural impracticability. (i) Full compliance with the requirements of this section is not required where a public entity can demonstrate that it is structurally impracticable to meet the requirements. Full compliance will be considered structurally impracticable only in those rare circumstances when the unique characteristics of terrain prevent the incorporation of accessibility features. (ii) If full compliance with this section would be structurally impracticable, compliance with this section is required to the extent that it is not structurally impracticable. In that case, any portion of the facility that can be made accessible shall be made accessible to the extent that it is not structurally impracticable. (iii) If providing accessibility in conformance with this section to individuals with certain disabilities (e.g., those who use wheelchairs) would be structurally impracticable, accessibility shall nonetheless be ensured to persons with other types of disabilities, (e.g., those who use crutches or who have sight, hearing, or mental impairments) in accordance with this section.




System on Chip Design Languages


Book Description

This book is the third in a series of books collecting the best papers from the three main regional conferences on electronic system design languages, HDLCon in the United States, APCHDL in Asia-Pacific and FDL in Europe. Being APCHDL bi-annual, this book presents a selection of papers from HDLCon'Ol and FDL'OI. HDLCon is the premier HDL event in the United States. It originated in 1999 from the merging of the International Verilog Conference and the Spring VHDL User's Forum. The scope of the conference expanded from specialized languages such as VHDL and Verilog to general purpose languages such as C++ and Java. In 2001 it was held in February in Santa Clara, CA. Presentations from design engineers are technical in nature, reflecting real life experiences in using HDLs. EDA vendors presentations show what is available - and what is planned-for design tools that utilize HDLs, such as simulation and synthesis tools. The Forum on Design Languages (FDL) is the European forum to exchange experiences and learn of new trends, in the application of languages and the associated design methods and tools, to design complex electronic systems. FDL'OI was held in Lyon, France, around seven interrelated workshops, Hardware Description Languages, Analog and Mixed signal Specification, C/C++ HW/SW Specification and Design, Design Environments & Languages, Real-Time specification for embedded Systems, Architecture Modeling and Reuse and System Specification & Design Languages.




Masters Theses in the Pure and Applied Sciences


Book Description

Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 29 (thesis year 1984) a total of 12,637 theses titles from 23 Canadian and 202 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 29 reports theses submitted in 1984, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.







Encyclopedia of Computer Science and Technology


Book Description

"This comprehensive reference work provides immediate, fingertip access to state-of-the-art technology in nearly 700 self-contained articles written by over 900 international authorities. Each article in the Encyclopedia features current developments and trends in computers, software, vendors, and applications...extensive bibliographies of leading figures in the field, such as Samuel Alexander, John von Neumann, and Norbert Wiener...and in-depth analysis of future directions."




Design of Biomedical Devices and Systems Second edition


Book Description

The design and functional complexity of medical devices and systems has increased during the past half century, evolving from the level of cardiac pacemakers to magnetic resonance imaging devices. Such life-saving advancements are monumentally advantageous, but with so much at stake, a step-by-step manual for biomedical engineers is essential. This







Design of Biomedical Devices and Systems, Third Edition


Book Description

Apply a Wide Variety of Design Processes to a Wide Category of Design Problems Design of Biomedical Devices and Systems, Third Edition continues to provide a real-world approach to the design of biomedical engineering devices and/or systems. Bringing together information on the design and initiation of design projects from several sources, this edition strongly emphasizes and further clarifies the standards of design procedure. Following the best practices for conducting and completing a design project, it outlines the various steps in the design process in a basic, flexible, and logical order. What’s New in the Third Edition: This latest edition contains a new chapter on biological engineering design, a new chapter on the FDA regulations for items other than devices such as drugs, new end-of-chapter problems, new case studies, and a chapter on product development. It adds mathematical modeling tools, and provides new information on FDA regulations and standards, as well as clinical trials and sterilization methods. Familiarizes the reader with medical devices, and their design, regulation, and use Considers safety aspects of the devices Contains an enhanced pedagogy Provides an overview of basic design issues Design of Biomedical Devices and Systems, Third Edition covers the design of biomedical engineering devices and/or systems, and is designed to support bioengineering and biomedical engineering students and novice engineers entering the medical device market.