The Theory of Transformations in Metals and Alloys


Book Description

This work is a classic reference text for metallurgists, material scientists and crystallographers. The first edition was published in 1965. The first part of that edition was revised and re-published in 1975 and again in 1981. The present two-part set represents the eagerly awaited full revision by the author of his seminal work, now published as Parts I and II. Professor Christian was one of the founding fathers of materials science and highly respected worldwide. The new edition of his book deserves a place on the bookshelf of every materials science and engineering department. Suitable thermal and mechanical treatments will produce extensive rearrangements of the atoms in metals and alloys, and corresponding marked variations in physical and chemical properties. This book describes how such changes in the atomic configuration are effected, and discusses the associated kinetic and crystallographic features. It deals with areas such as lattice geometry, point defects, dislocations, stacking faults, grain and interphase boundaries, solid solutions, diffusion, etc. The first part covers the general theory while the second part is concerned with descriptions of specific types of transformations.




Phase Transformations in Metals and Alloys, Third Edition (Revised Reprint)


Book Description

In the decade since the first edition of this popular text was published, the metallurgical field has undergone rapid developments in many sectors. Nonetheless, the underlying principles governing these developments remain the same. A textbook that presents these advances within the context of the fundamentals is greatly needed by instructors in the field Phase Transformations in Metals and Alloys, Second Edition maintains the simplicity that undergraduate instructors and students have come to appreciate while updating and expanding coverage of recently developed methods and materials. The book is effectively divided into two parts. The beginning chapters contain the background material necessary for understanding phase transformations - thermodynamics, kinetics, diffusion theory and the structure and properties of interfaces. The following chapters deal with specific transformations - solidification, diffusional transformation in solids and diffusionless transformation. Case studies of engineering alloys are incorporated to provide a link between theory and practice. New additions include an extended list of further reading at the end of each chapter and a section containing complete solutions to all exercises in the book Designed for final year undergraduate and postgraduate students of metallurgy, materials science, or engineering materials, this is an ideal textbook for both students and instructors.




Mechanisms of Diffusional Phase Transformations in Metals and Alloys


Book Description

Developed by the late metallurgy professor and master experimentalist Hubert I. Aaronson, this collection of lecture notes details the fundamental principles of phase transformations in metals and alloys upon which steel and other metals industries are based. Mechanisms of Diffusional Phase Transformations in Metals and Alloys is devoted to solid-s







Phase Transformation in Metals


Book Description

This textbook explains the physics of phase transformation and associated constraints from a metallurgical or materials science point of view, based on many topics including crystallography, mass transport by diffusion, thermodynamics, heat transfer and related temperature gradients, thermal deformation, and even fracture mechanics. The work presented emphasizes solidification and related analytical models based on heat transfer. This corresponds with the most fundamental physical event of continuous evolution of latent heat of fusion for directional or non-directional liquid-to-solid phase transformation at a specific interface with a certain geometrical shape, such as planar or curved front. Dr. Perez introduces mathematical and engineering approximation schemes for describing the phase transformation, mainly during solidification of pure metals and alloys. Giving clear definitions and explanations of theoretical concepts and full detail of derivation of formulae, this interdisciplinary volume is ideal for graduate and upper-level undergraduate students in applied science, and professionals in the metal making and surface reconstruction industries.




Modern Physical Metallurgy


Book Description

Modern Physical Metallurgy, Fourth Edition explains the fundamental principles of physical metallurgy and their application, allowing its readers to understand the many important technological phenomena of the field. The book covers topics such as the molecular properties of metals; the different physical methods of metals and alloys; and the structure of alloys. Also covered are topics such as the deformation of metals and alloys; phase transformations; and related processes such as creep, fatigue, fracture, oxidation, and corrosion. The text is recommended for metallurgists, chemists, and engineers who would like to know more about the principles behind metallurgy and its application in different fields.




Theory of Transformations in Steels


Book Description

Written by the leading authority in the field of solid-state phase transformations, Theory of Transformations in Steels is the first book to provide readers with a complete discussion of the theory of transformations in steel. Offers comprehensive treatment of solid-state transformations, covering the vast number in steels Serves as a single source for almost any aspect of the subject Features discussion of physical properties, thermodynamics, diffusion, and kinetics Covers ferrites, martensite, cementite, carbides, nitrides, substitutionally-alloyed precipitates, and pearlite Contains a thoroughly researched and comprehensive list of references as further and recommended reading With its broad and deep coverage of the subject, this work aims at inspiring research within the field of materials science and metallurgy.




Theory of Structural Transformations in Solids


Book Description

Addressing both theoretical and practical aspects of phase transformation in alloys, this text formulates significant aspects of the quantitative metallurgy of phase transformations. It further applies solid-state theoretical concepts to structure problems arising in experimental studies of real alloys. Author Armen G. Khachaturyan, Professor of Materials Science at Rutgers University, ranks among the foremost authorities on this subject. In this volume, he takes a creative approach to examining change in atomic structure and morphology caused by ordering, strain-induced ordering, strain-controlled decomposition, and strain-induced coarsening. Unifying relationships among various fields of solid-state physics are stressed throughout the book. Topics include structure changes in two-phase alloys controlled by the phase transformation elastic strain, in addition to important results in the area of microscopic elasticity regarding problems of elastic interaction in impurity atoms, and strain-induced ordering and decomposition in interstitial solutions. An excellent text for advanced undergraduate and graduate courses in physical metallurgy, solid state physics, solid state chemistry, and materials science, this volume is also a valuable reference for professionals conducting research in phase transformations




Phase Transformations in Materials


Book Description

For all kinds of materials, phase transformations show common phenomena and mechanisms, and often turn a material, for example metals, multiphase alloys, ceramics or composites, into its technological useful form. The physics and thermodynamics of a transformation from the solid to liquid state or from one crystal form to another are therefore essential for creating high-performance materials. This handbook covers phase transformations, a general phenomenon central to understanding the behavior of materials and for creating high-performance materials. It will be an essential reference for all materials scientists, physicists and engineers involved in the research and development of new high performance materials. It is the revised and enhanced edition of the renowned book edited by the late P. Haasen in 1990 (Vol. 5, Materials Science and Technology).




From Hamiltonians to Phase Diagrams


Book Description

The development of the modern theory of metals and alloys has coincided with great advances in quantum-mechanical many-body theory, in electronic structure calculations, in theories of lattice dynamics and of the configura tional thermodynamics of crystals, in liquid-state theory, and in the theory of phase transformations. For a long time all these different fields expanded quite independently, but now their overlap has become sufficiently large that they are beginning to form the basis of a comprehensive first-principles the ory of the cohesive, structural, and thermodynamical properties of metals and alloys in the crystalline as well as in the liquid state. Today, we can set out from the quantum-mechanical many-body Hamiltonian of the system of electrons and ions, and, following the path laid out by generations of the oreticians, we can progress far enough to calculate a pressure-temperature phase diagram of a metal or a composition-temperature phase diagram of a binary alloy by methods which are essentially rigorous and from first prin ciples. This book was written with the intention of confronting the materials scientist, the metallurgist, the physical chemist, but also the experimen tal and theoretical condensed-matter physicist, with this new and exciting possibility. Of course there are limitations to such a vast undertaking as this. The selection of the theories and techniques to be discussed, as well as the way in which they are presented, are necessarily biased by personal inclination and personal expertise.