Thermal Enhancements


Book Description




Analysis of Selected Enhancements for Soil Vapor Extraction


Book Description

This report provides an engineering analysis of, and status report on, selected enhancements for soil vapor extraction (SVE) treatment technologies. The report is intended to assist project managers considering an SVE treatment system by providing them with an up-to-date status of enhancement technologies; an evaluation of each technology's applicability to various site conditions; a presentation of cost and performance information; a list of vendors specializing in the technologies; a discussion of relative strengths and limitations of the technologies; recommendations to keep in mind when considering the enhancements; and a compilation of references. The performance of an SVE system depends on properties of both the contaminants and the soil. SVE is generally applicable to compounds with a vapor pressure of greater than 1 millimeter of mercury at 20EC and a Henry s Law constant of greater than 100 atmospheres per mole fraction. SVE is most effective at sites with relatively permeable contaminated soil and with saturated hydraulic conductivities of greater than 1 x 10 or 1 x 10 centimeter per second (cm/s). SVE by itself does not effectively remove contaminants -3 -2 in saturated soil. However, SVE can be used as an integral part of some treatment schemes that treat both groundwater and the overlying vadose zone. Enhancement technologies should be considered when contaminant or soil characteristics limit the effectiveness of SVE or when contaminants are present in saturated soil. The five enhancement technologies covered in this report are as follows and are described in the following subsections: * Air Sparging * Dual-phase Extraction * Directional Drilling * Pneumatic and Hydraulic Fracturing * Thermal Enhancement.




Heat Transfer Enhancement Techniques. With Special Attention to Passive Methods of Heat Transfer Enhancement


Book Description

Heat exchangers are widely used in the industrial sector, e.g. in the refrigeration, air conditioning, petrochemical, and agricultural food industry. The high cost of energy and material has resulted in an increased effort aimed at producing high performance heat exchanger equipment. Passive methods of heat transfer enhancement do not need external power for enhancement. One of these kinds of passive technique is twisted tape inserts that enhance the performance of heat exchangers. Using multiple twisted tape inserts gives better enhancement than a single twisted tape insert. Using nanofluid gives also better thermal performance than water. Therefore, nanofluid along with twisted tape inserts was used in this study. For this study, different combinations of multiple twisted tape inserts were designed and fabricated. These different combinations contain dual, triple, and quadruple twisted tapes. Directions of twists are also varied which enables to study the effect of different swirl flow generators. Nanofluid is used with various volume concentrations of 0.07%, 0.14% and 0.21% in order to investigate the effect of nanoparticle concentration on heat transfer enhancement. Experimental investigation was carried out by having a constant heat flux condition and by varying the volume flow rate of flow from 2 to 10 lpm.




Advances in Heat Transfer Enhancement


Book Description

This Brief addresses the phenomena of heat transfer enhancement. A companion edition in the SpringerBrief Subseries on Thermal Engineering and Applied Science to three other monographs including “Critical Heat Flux in Flow Boiling in Microchannels,” this volume is idea for professionals, researchers, and graduate students concerned with electronic cooling.







Heat Transfer Enhancement of Heat Exchangers


Book Description

Heat transfer enhancement in single-phase and two-phase flow heat exchangers in important in such industrial applications as power generating plant, process and chemical industry, heating, ventilation, air conditioning and refrigeration systems, and the cooling of electronic equipment. Energy savings are of primary importance in the design of such systems, leading to more efficient, environmentally friendly devices. This book provides invaluable information for such purposes.




Heat Transfer Enhancement in Chemical Processes


Book Description

Heat Transfer Enhancement in Chemical Processes combines process technologies with heat exchange equipment to study heat transfer enhancement. The book provides guidance for the progress of process technologies and the application of enhanced heat transfer equipment. It analyzes the basic principles of heat transfer and summarizes the theories and methods of heat transfer enhancement, while also focusing on three representative processes in petrochemical industry, including oil refining, aromatics, and ethylene production. The book summarizes in a systematical way the practical application of heat transfer enhancement in the petrochemical industry, from the equipment components, the processes, and the whole plant. - Puts theory into practice, providing guidance for the application of scientific research achievements - Integrates process technologies with process intensification, providing guidance for process flow enhancement - Combines process with equipment, introducing heat transfer enhancement technologies suitable for different processes - Covers the oil refining unit, aromatics unit, the ethylene plant and its downstream units




Heat Transfer Enhancement with Nanofluids


Book Description

Nanofluids are gaining the attention of scientists and researchers around the world. This new category of heat transfer medium improves the thermal conductivity of fluid by suspending small solid particles within it and offers the possibility of increased heat transfer in a variety of applications. Bringing together expert contributions from




Heat Transfer Enhancement Using Nanofluid Flow in Microchannels


Book Description

Heat Transfer Enhancement Using Nanofluid Flow in Microchannels: Simulation of Heat and Mass Transfer focuses on the numerical simulation of passive techniques, and also covers the applications of external forces on heat transfer enhancement of nanofluids in microchannels. Economic and environmental incentives have increased efforts to reduce energy consumption. Heat transfer enhancement, augmentation, or intensification are the terms that many scientists employ in their efforts in energy consumption reduction. These can be divided into (a) active techniques which require external forces such as magnetic force, and (b) passive techniques which do not require external forces, including geometry refinement and fluid additives. - Gives readers the knowledge they need to be able to simulate nanofluids in a wide range of microchannels and optimise their heat transfer characteristics - Contains real-life examples, mathematical procedures, numerical algorithms, and codes to allow readers to easily reproduce the methodologies covered, and to understand how they can be applied in practice - Presents novel applications for heat exchange systems, such as entropy generation minimization and figures of merit, allowing readers to optimize the techniques they use - Focuses on the numerical simulation of passive techniques, and also covers the applications of external forces on heat transfer enhancement of nanofluids in microchannels




Heat Transfer Enhancement And Energy Conservation


Book Description

Heat transfer is close connected to the better utilization of thermal energy. This book provides an international perspective on the status of heat transfer enhancement and energy conservation research, development, and applications. It contains scientific papers from countries and areas including Bahrain, Canada, China, France, the Federal Republic of Germany, Hong Kong, Italy, India, Japan, New Zealand, Poland, the United Kingdom, the United States of America, and Yugoslavia. It is a valuable reference for anyone interested in heat transfer enhancement and energy conservation.