LASL Explosive Property Data


Book Description




Chemical Abstracts


Book Description




Recommendations on the Transport of Dangerous Goods


Book Description

The Manual of Tests and Criteria contains criteria, test methods and procedures to be used for classification of dangerous goods according to the provisions of Parts 2 and 3 of the United Nations Recommendations on the Transport of Dangerous Goods, Model Regulations, as well as of chemicals presenting physical hazards according to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). As a consequence, it supplements also national or international regulations which are derived from the United Nations Recommendations on the Transport of Dangerous Goods or the GHS. At its ninth session (7 December 2018), the Committee adopted a set of amendments to the sixth revised edition of the Manual as amended by Amendment 1. This seventh revised edition takes account of these amendments. In addition, noting that the work to facilitate the use of the Manual in the context of the GHS had been completed, the Committee considered that the reference to the "Recommendations on the Transport of Dangerous Goods" in the title of the Manual was no longer appropriate, and decided that from now on, the Manual should be entitled "Manual of Tests and Criteria".




Explosive Effects and Applications


Book Description

This is a broad-based text on the fundamentals of explosive behavior and the application of explosives in civil engineering, industrial processes, aerospace applications, and military uses.










High Explosives and Propellants


Book Description

High Explosives and Propellants, Second Edition is a four-part book classified into High Explosives, Blasting Accessories, Application of High Explosives, and Deflagrating and Propellent Explosives. Part I, High Explosives, centers on the general principles, manufacture, design, and assessment of this type of explosive. Part II, Blasting Accessories, describes initiation of explosives and different types of detonators. Part III, Application of High Explosives, deals with the commercial and military applications of high explosives. The last part, Deflagrating and Propellent Explosives, discusses the manufacture, properties, design, and application of propellants.




Primary Explosives


Book Description

This is the first comprehensive overview of this topic. It serves as a single source for information about the properties, preparation, and uses of all relevant primary explosives. The first chapter provides background such as the basics of initiation and differences between requirements on primary explosives used in detonators and igniters. The authors then clarify the influence of physical characteristics on explosive properties, focusing on those properties required for primary explosives. Furthermore, the issue of sensitivity is discussed. All the chapters on particular groups of primary explosives are structured in the same way, including introduction, physical and chemical properties, explosive properties, preparation and documented use. The authors thoroughly verified all data and information. A unique feature of this book are original microscopic images of some explosives.







Nanothermites


Book Description

The recent introduction of the “nano” dimension to pyrotechnics has made it possible to develop a new family of highly reactive substances: nanothermites. These have a chemical composition that is comparable to that of thermites at submillimeter or micrometric granulometry, but with a morphology having a much increased degree of homogeneity. This book discusses the methods of preparation of these energetic nanomaterials, their specific properties, and the different safety aspects inherent in their manipulation.