Three-Dimensional Elastic Bodies in Rolling Contact


Book Description

This book is intended for mechanicians, engineering mathematicians, and, generally for theoretically inclined mechanical engineers. It has its origin in my Master's Thesis (J 957), which I wrote under the supervision of Professor Dr. R. Timman of the Delft TH and Dr. Ir. A. D. de Pater of Netherlands Railways. I did not think that the surface of the problem had even been scratched, so I joined de Pater, who had by then become Professor in the Engineering Mechanics Lab. of the Delft TH, to write my Ph. D. Thesis on it. This thesis (1967) was weil received in railway circles, which is due more to de Pater's untiring promotion than to its merits. Still not satisfied, I feit that I needed more mathe matics, and I joined Professor Timman's group as an Associate Professor. This led to the present work. Many thanks are due to G. M. L. Gladwell, who thoroughly polished style and contents of the manuscript. Thanks are also due to my wife, herself an engineering mathematician, who read the manuscript through critically, and made many helpful comments, to G. F. M. Braat, who also read an criticised, and, in addition, drew the figures together with J. Schonewille, to Ms. A. V. M. de Wit, Ms. M. den Boef, and Ms. P. c. Wilting, who typed the manuscript, and to the Publishers, who waited patiently. Delft-Rotterdam, 17 July 1990. J. J.




Three-Dimensional Elastic Bodies in Rolling Contact


Book Description

This book is intended for mechanicians, engineering mathematicians, and, generally for theoretically inclined mechanical engineers. It has its origin in my Master's Thesis (J 957), which I wrote under the supervision of Professor Dr. R. Timman of the Delft TH and Dr. Ir. A. D. de Pater of Netherlands Railways. I did not think that the surface of the problem had even been scratched, so I joined de Pater, who had by then become Professor in the Engineering Mechanics Lab. of the Delft TH, to write my Ph. D. Thesis on it. This thesis (1967) was weil received in railway circles, which is due more to de Pater's untiring promotion than to its merits. Still not satisfied, I feit that I needed more mathe matics, and I joined Professor Timman's group as an Associate Professor. This led to the present work. Many thanks are due to G. M. L. Gladwell, who thoroughly polished style and contents of the manuscript. Thanks are also due to my wife, herself an engineering mathematician, who read the manuscript through critically, and made many helpful comments, to G. F. M. Braat, who also read an criticised, and, in addition, drew the figures together with J. Schonewille, to Ms. A. V. M. de Wit, Ms. M. den Boef, and Ms. P. c. Wilting, who typed the manuscript, and to the Publishers, who waited patiently. Delft-Rotterdam, 17 July 1990. J. J.




Rolling Contact Phenomena


Book Description

Preface.- Rolling Contact Phenomena - Linear Elasticity.- Finite Element Methods for Rolling Contact.- Plastic Deformation in Rolling Contact.- Non-Steady State Rolling Contact and Corrugations.- Modelling of Tyre Force and Moment Generation.- Rolling Noise.- Lubrication




Three-Dimensional Contact Problems


Book Description

A systematic treatment, based on Green's functions and integral equations, is given to the analytical and numerical methods and results for a great number of 3-D contact problems for elastic bodies. Semi-bounded elastic bodies (layer, cylinder, space with cylindrical or spherical cavity, 3-D wedge, special cases of which are half- and quarter-spaces, cone) and finite elastic bodies (circular plate, finite cylinder, spherical layer, spherical lens, sphere) are considered. Methods introduced in the book can also be applied in fracture mechanics, hydrodynamics, electrostatics, thermodynamics and diffusion theory, continuum mechanics, and mathematical physics, as well as by engineers and students in mathematics, mechanics, and physics.




Contact Mechanics


Book Description

This treatise is concerned with the stresses and deformation of solid bodies in contact with each other, along curved surfaces which touch initially at a point or along a line. Examples are a railway wheel and rail, or a pair of gear wheel teeth. Professor Johnson first reviews the development of the theory of contact stresses since the problem was originally addressed by H. Hertz in 1882. Next he discusses the influence of friction and the topographical roughness of surfaces, and this is incorporated into the theory of contact mechanics. An important feature is the treatment of bodies which deform plastically or viscoelastically. In addition to stationary contact, an appreciable section of the book is concerned with bodies which are in sliding or rolling contact, or which collide.




System Dynamics and Long-Term Behaviour of Railway Vehicles, Track and Subgrade


Book Description

During the last decades completely new technologies for high speed railway vehicles have been developed. The primary goals have been to increase traction, axle load, and travelling speed, and to guarantee safety of the passengers. However, the new developments have revealed new limitations: settlement and destruction of the ballast and the subgrade lead to deterioration of the track; irregular wear of the wheels cause an increase in overall load and deterioration of passengers comfort; damage of the running surfaces of the rail and the wheel becomes more frequent. This problems have been investigated in the Priority Programme SPP 1015 supported by the Deutsche Forschungsgemeinschaft (DFG), aiming at a better understanding of the dynamic interaction of vehicle and track and the long-term behaviour of the components of the system. The book contains the scientific results of the programme as presented at the concluding colloquium held at University of Stuttgart, Germany, March 13-15, 2002.




Modern Tribology Handbook, Two Volume Set


Book Description

Recent research has led to a deeper understanding of the nature and consequences of interactions between materials on an atomic scale. The results have resonated throughout the field of tribology. For example, new applications require detailed understanding of the tribological process on macro- and microscales and new knowledge guides the rational




Mechanics of Elastic Contacts


Book Description

Materials and mechanical engineering researchers studying wear, fretting, elastic indentation testing and other tribological processes frequently need closed-form solutions for various attributes of contacts. These characteristics include contact law, pressure distribution, internal state of stress induced and the influence of friction. Materials and mechanical engineering researchers studying wear, fretting, elastic indentation testing and other tribological processes frequently need closed-form solutions for various attributes of contacts. These characteristics include contact law, pressure distribution, internal state of stress induced and the influence of friction. These solutions, scattered throughout the applied mechanics literature, are difficult to locate, are presented using a range of solution techniques, and express results in a way that is suitable only for experts in the field. `Mechanics of Elastic Contacts' uses a consistent set of recipes for the solution of all relevant problems, presents results in the simplest possible forms, and contains summaries using tabulated data. This reference source will provide a clear guide to elastic contacts for engineering designers, materials scientists and tribologists irrespective of their level of expertise in this important subject.




Handbook of Railway Vehicle Dynamics, Second Edition


Book Description

Handbook of Railway Vehicle Dynamics, Second Edition, provides expanded, fully updated coverage of railway vehicle dynamics. With chapters by international experts, this work surveys the main areas of rolling stock and locomotive dynamics. Through mathematical analysis and numerous practical examples, it builds a deep understanding of the wheel-rail interface, suspension and suspension component design, simulation and testing of electrical and mechanical systems, and interaction with the surrounding infrastructure, and noise and vibration. Topics added in the Second Edition include magnetic levitation, rail vehicle aerodynamics, and advances in traction and braking for full trains and individual vehicles.