Roadside Design Guide


Book Description










Work Zone Operations Best Practices Guidebook


Book Description

This Work Zone Best Practices Guidebook provides an easily accessible compilation of work zone operations practices used and recommended by various States and localities around the country. The Guidebook is a reference document that can be updated with new approaches, technologies, and practices for effectively managing work zones and reducing the impacts of work zones on mobility and safety as they are identified. The best practices are descriptive, not prescriptive. They describe approaches that have been successfully used by transportation agencies, along with contact information to find out more from the agency using the practice. Each organization must determine which of these practices are best suited for its particular situation, considering all the site-specific factors that affect work zone operations.







Gravel Roads


Book Description

The purpose of this manual is to provide clear and helpful information for maintaining gravel roads. Very little technical help is available to small agencies that are responsible for managing these roads. Gravel road maintenance has traditionally been "more of an art than a science" and very few formal standards exist. This manual contains guidelines to help answer the questions that arise concerning gravel road maintenance such as: What is enough surface crown? What is too much? What causes corrugation? The information is as nontechnical as possible without sacrificing clear guidelines and instructions on how to do the job right.




Managing Safety: Challenges Ahead (2 Vols. Set)


Book Description

Papers presented at the Safety Conference: Managing Safety : Challenges Ahead, held at New Delhi during 14-16 February 2005.




Safety at Street Works and Road Works


Book Description

This publication sets out the statutory requirements for signing, lighting, and guarding at street works and road works. This is the core reference manual for utility companies, local authorities, street work contractors and others whose day-to-day business involves street works (works by statutory undertakers and other utility companies etc) and road works (works to maintain or repair road infrastructure). The code, which covers all of the UK and includes national variations, is now compulsory for highway/road authorities in England, Wales and Northern Ireland. It applies to all single carriageway roads and dual carriageways with a speed limit of 40 mph or less. The code is now divided into three parts: Basic Principles, Operations, and Equipment and Vehicles; site layout diagrams have been redrawn to make them easier to understand. There is: increased emphasis on using risk assessment and guidance on what to consider in such assessments; strengthened guidance on providing for pedestrians and cyclists and new guidance on traffic control measures related to road closures, one-way working and temporary road obstructions; enhanced advice on other traffic control measures including works near tramways and railways, and mobile/short duration works; and updated advice on high visibility clothing and the signing and conspicuity requirements for work vehicles. Effective from 1 October 2014 when it will supersede the 2001 edition (ISBN 9780115519581).




Roundabouts


Book Description

TRB's National Cooperative Highway Research Program (NCHRP) Report 672: Roundabouts: An Informational Guide - Second Edition explores the planning, design, construction, maintenance, and operation of roundabouts. The report also addresses issues that may be useful in helping to explain the trade-offs associated with roundabouts. This report updates the U.S. Federal Highway Administration's Roundabouts: An Informational Guide, based on experience gained in the United States since that guide was published in 2000.