Use of Adhesives to Retrofit Out-of-plane Distortion Induced Fatigue Cracks


Book Description

Prior to 1985, it was common practice to avoid welding the connection plates to the tension flange of the girders of steel bridges. However, extensive fatigue cracking has developed in the unstiffened web gaps because of out-ofplane distortion. A new retrofit option was investigated that uses a room-temperature-cured two-part epoxy (3M Adhesive DP460-NS) to join a small length of 3/4-inch thick steel angle to the tension flange and the connection plate. A field test on two skewed bridges showed that the adhesive-angle retrofit system decreased the out-of-plane strain range by 40 to 50% when the original strain range was more than 50 microstrains. The ten adhesive-angle retrofits remained in place and were in good condition after three and a half years, suggesting that the chosen adhesive had good environmental durability. A laboratory large-scale specimen test with 8 web gaps showed that the retrofit system stopped or retarded most cracks even without stop holes when the measured out-of-plane strains were approximately 600 microstrains. Coupon tests conducted to investigate the environmental durability of the chosen adhesive showed that the chosen adhesive is suitable for applications at room or low temperature, even with high relative humidity.




Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges


Book Description

Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges contains lectures and papers presented at the Ninth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2018), held in Melbourne, Australia, 9-13 July 2018. This volume consists of a book of extended abstracts and a USB card containing the full papers of 393 contributions presented at IABMAS 2018, including the T.Y. Lin Lecture, 10 Keynote Lectures, and 382 technical papers from 40 countries. The contributions presented at IABMAS 2018 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of bridge maintenance, safety, risk, management and life-cycle performance. Major topics include: new design methods, bridge codes, heavy vehicle and load models, bridge management systems, prediction of future traffic models, service life prediction, residual service life, sustainability and life-cycle assessments, maintenance strategies, bridge diagnostics, health monitoring, non-destructive testing, field testing, safety and serviceability, assessment and evaluation, damage identification, deterioration modelling, repair and retrofitting strategies, bridge reliability, fatigue and corrosion, extreme loads, advanced experimental simulations, and advanced computer simulations, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of more rational decision-making on bridge maintenance, safety, risk, management and life-cycle performance of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.




Life-Cycle Civil Engineering: Innovation, Theory and Practice


Book Description

Life-Cycle Civil Engineering: Innovation, Theory and Practice contains the lectures and papers presented at IALCCE2020, the Seventh International Symposium on Life-Cycle Civil Engineering, held in Shanghai, China, October 27-30, 2020. It consists of a book of extended abstracts and a multimedia device containing the full papers of 230 contributions, including the Fazlur R. Khan lecture, eight keynote lectures, and 221 technical papers from all over the world. All major aspects of life-cycle engineering are addressed, with special emphasis on life-cycle design, assessment, maintenance and management of structures and infrastructure systems under various deterioration mechanisms due to various environmental hazards. It is expected that the proceedings of IALCCE2020 will serve as a valuable reference to anyone interested in life-cycle of civil infrastructure systems, including students, researchers, engineers and practitioners from all areas of engineering and industry.




Fatigue and Fracture


Book Description

"This book emphasizes the physical and practical aspects of fatigue and fracture. It covers mechanical properties of materials, differences between ductile and brittle fractures, fracture mechanics, the basics of fatigue, structural joints, high temperature failures, wear, environmentally-induced failures, and steps in the failure analysis process."--publishers website.







Defects and Damage in Composite Materials and Structures


Book Description

The advantages of composite materials include a high specific strength and stiffness, formability, and a comparative resistance to fatigue cracking and corrosion. However, not forsaking these advantages, composite materials are prone to a wide range of defects and damage that can significantly reduce the residual strength and stiffness of a structure or result in unfavorable load paths. Emphasizing defect identification and restitution, Defects and Damage in Composite Materials and Structures explains how defects and damage in composite materials and structures impact composite component performance. Providing ready access to an extensive, descriptive list of defects and damage types, this must-have reference: Examines defect criticality in composite structures Recommends repair actions to restore structural integrity Discusses failure modes and mechanisms of composites due to defects Reviews NDI processes for finding and identifying defects in composite materials Relating defect detection methods to defect type, the author merges his experience in the field of in-service activities for composite airframe maintenance and repair with indispensable reports and articles on defects and damage in advanced composite materials from the last 50 years.










Adhesives and Adhesive Joints in Industry Applications


Book Description

This book discusses applications of adhesives and adhesive joints in different branches of industry. The properties of adhesives and adhesive joints, and also the requirements of mechanical properties and chemical and environmental resistance of adhesives and adhesive joints, are very important because proper strength, durability, and time of use are all factors that are dependent on the type of industry. The aim of this book is to present information on the type of adhesives and adhesive joints, in addition to their characteristics, used in different branches of industry. This information should enable scientists, engineers, and designers to acquire knowledge of adhesives and adhesive joints, which could be helpful in selecting the right type of adhesive and adhesive joint to make applications for a particular industry.




Fastener Design Manual


Book Description