Using Microwave Measurements to Detect Moisture in Asphaltic Concrete


Book Description

An experimental technique based upon dielectric properties was developed to measure the volumetric moisture content in hot-mix asphalt concrete. The dielectric properties were calculated from the measured reflection coefficients and phase angles. The measurements were obtained over a band of frequencies in the microwave range of 12.4 to 18.0 GHz. The test program included different aggregate types, aggregate gradations, asphalt types, asphalt contents, air void contents, specimen thickness, and surface smoothness. Microwave reflection measurements were obtained for the hot-mix asphalt concrete specimens and their components in a sweep mode over the above frequency band. These measurements were analyzed, and the magnitude of the dielectric constant and the loss factor were calculated. The dielectric properties for these mixes were obtained at the dry state and at two levels of moisture content. The dielectric properties were correlated to the mix characteristics. Regression models were developed to predict the volumetric moisture content of hotmix asphalt concrete. A model developed from a theoretical approach was found to give the best correlation.







Pavement Management Implementation


Book Description







Determining Water Content of Fresh Concrete by Microwave Reflection Or Transmission Measurement


Book Description

In search of a rapid and accurate method for determining the water content of fresh concrete mixes, the microwave reflection and transmission properties of fresh concrete mixes were studied to determine the extent of correlation between each of these properties and water content. This report describes the procedures that were devised to measure these properties and the results that were obtained. The results indicated that the microwave reflectivity and transmission of fresh concrete mixes are both sufficiently correlated to water content. Since these properties can be measured very rapidly without any pretreatment of the fresh concrete samples, microwave reflectivity or transmission measurement has the potential to be a rapid, nondestructive, and reasonably accurate quality-assurance method for measuring the water content of fresh concrete mixes, especially for a large capacity ready-mix plant. Although it is slightly more elaborate than reflectivity measurement, it is believed that transmission measurement may yield a more precise and accurate method.







Moisture Damage in Asphalt Concrete


Book Description

This synthesis will be of interest to pavement designers, construction engineers, maintenance engineers, and others interested in avoiding or limiting moisture damage in asphalt concrete. Information is provided on physical and chemical explanations for moisture damage in asphalt concrete, along with a discussion of current practices and test methods for determining or reducing the susceptibility of various asphalt concrete components and mixtures to such damage. Moisture damage in asphalt concrete is a nationwide problem which often necessitates premature replacement of highway pavement surfaces. This report of the Transportation Research Board describes the underlying physical and chemical phenomena responsible for such damage. Current test methods used to determine the susceptibility of asphalt concretes, or their constituents, to moisture damage are described and evaluated. Additionally, current practices for minimizing the potential for moisture damage are examined.




Rapid Measurement of Concrete Pavement Thickness and Reinforcement Location


Book Description

This report documents and presents the results of a study that evaluated currently available nondestructive testing systems that appeared to have potential for supplementing or replacing coring in determining concrete pavement thickness and reinforcement location. The evaluation was done primarily in the field. The principal work consisted of the systems under on-the-job conditions on eight paving projects in six states. The measurement technique were employed in conjunction with statistical acceptance criteria evolved in the course of the study.




Methods of Measuring Moisture in Building Materials and Structures


Book Description

RILEM TC 248-MMB was established in 2012 with the main aim to improve and distribute knowledge related to moisture measurement in construction materials in various scientific and industrial applications. Properties and performance of building materials and structures are influenced to a large extent by the moisture conditions in the materials. Obvious examples are heat conductivity, shrinkage and creep, transport properties, most types of deterioration, discoloration etc. For research and applications the moisture conditions must be quantified, by measurements in the laboratory or under field conditions. There is much variation in methods being used, even within the same topic, in different countries, both with regard to materials and to applications. No consensus whatsoever does exist. For the construction industry it is important to be able to quantify the moisture conditions in an accurate way in various applications. This state-of-the-art report is divided into two parts, Principles and Applications, with altogether 28 chapters on various moisture measuring principles and a number of applications.




Handbook on Nondestructive Testing of Concrete


Book Description

Civil engineers will value this resource that examines the tools and techniques used to estimate the in-place strength on concrete, permeation properties that relate to potential durability, and the methods used to assess the internal condition of concrete and the corrosion activity of steel reinforcement.