VLSI Design and Test for Systems Dependability


Book Description

This book discusses the new roles that the VLSI (very-large-scale integration of semiconductor circuits) is taking for the safe, secure, and dependable design and operation of electronic systems. The book consists of three parts. Part I, as a general introduction to this vital topic, describes how electronic systems are designed and tested with particular emphasis on dependability engineering, where the simultaneous assessment of the detrimental outcome of failures and cost of their containment is made. This section also describes the related research project “Dependable VLSI Systems,” in which the editor and authors of the book were involved for 8 years. Part II addresses various threats to the dependability of VLSIs as key systems components, including time-dependent degradations, variations in device characteristics, ionizing radiation, electromagnetic interference, design errors, and tampering, with discussion of technologies to counter those threats. Part III elaborates on the design and test technologies for dependability in such applications as control of robots and vehicles, data processing, and storage in a cloud environment and heterogeneous wireless telecommunications. This book is intended to be used as a reference for engineers who work on the design and testing of VLSI systems with particular attention to dependability. It can be used as a textbook in graduate courses as well. Readers interested in dependable systems from social and industrial–economic perspectives will also benefit from the discussions in this book.




VLSI Test Principles and Architectures


Book Description

This book is a comprehensive guide to new DFT methods that will show the readers how to design a testable and quality product, drive down test cost, improve product quality and yield, and speed up time-to-market and time-to-volume. Most up-to-date coverage of design for testability. Coverage of industry practices commonly found in commercial DFT tools but not discussed in other books. Numerous, practical examples in each chapter illustrating basic VLSI test principles and DFT architectures.




VLSI Design and Test


Book Description

This book constitutes the refereed proceedings of the 23st International Symposium on VLSI Design and Test, VDAT 2019, held in Indore, India, in July 2019. The 63 full papers were carefully reviewed and selected from 199 submissions. The papers are organized in topical sections named: analog and mixed signal design; computing architecture and security; hardware design and optimization; low power VLSI and memory design; device modelling; and hardware implementation.




VLSI Design and Test


Book Description

This book constitutes the refereed proceedings of the 21st International Symposium on VLSI Design and Test, VDAT 2017, held in Roorkee, India, in June/July 2017. The 48 full papers presented together with 27 short papers were carefully reviewed and selected from 246 submissions. The papers were organized in topical sections named: digital design; analog/mixed signal; VLSI testing; devices and technology; VLSI architectures; emerging technologies and memory; system design; low power design and test; RF circuits; architecture and CAD; and design verification.




Advanced VLSI Design and Testability Issues


Book Description

This book facilitates the VLSI-interested individuals with not only in-depth knowledge, but also the broad aspects of it by explaining its applications in different fields, including image processing and biomedical. The deep understanding of basic concepts gives you the power to develop a new application aspect, which is very well taken care of in this book by using simple language in explaining the concepts. In the VLSI world, the importance of hardware description languages cannot be ignored, as the designing of such dense and complex circuits is not possible without them. Both Verilog and VHDL languages are used here for designing. The current needs of high-performance integrated circuits (ICs) including low power devices and new emerging materials, which can play a very important role in achieving new functionalities, are the most interesting part of the book. The testing of VLSI circuits becomes more crucial than the designing of the circuits in this nanometer technology era. The role of fault simulation algorithms is very well explained, and its implementation using Verilog is the key aspect of this book. This book is well organized into 20 chapters. Chapter 1 emphasizes on uses of FPGA on various image processing and biomedical applications. Then, the descriptions enlighten the basic understanding of digital design from the perspective of HDL in Chapters 2–5. The performance enhancement with alternate material or geometry for silicon-based FET designs is focused in Chapters 6 and 7. Chapters 8 and 9 describe the study of bimolecular interactions with biosensing FETs. Chapters 10–13 deal with advanced FET structures available in various shapes, materials such as nanowire, HFET, and their comparison in terms of device performance metrics calculation. Chapters 14–18 describe different application-specific VLSI design techniques and challenges for analog and digital circuit designs. Chapter 19 explains the VLSI testability issues with the description of simulation and its categorization into logic and fault simulation for test pattern generation using Verilog HDL. Chapter 20 deals with a secured VLSI design with hardware obfuscation by hiding the IC’s structure and function, which makes it much more difficult to reverse engineer.




VLSI Fault Modeling and Testing Techniques


Book Description

VLSI systems are becoming very complex and difficult to test. Traditional stuck-at fault problems may be inadequate to model possible manufacturing defects in the integrated ciruit. Hierarchial models are needed that are easy to use at the transistor and functional levels. Stuck-open faults present severe testing problems in CMOS circuits, to overcome testing problems testable designs are utilized. Bridging faults are important due to the shrinking geometry of ICs. BIST PLA schemes have common features-controllability and observability - which are enhanced through additional logic and test points. Certain circuit topologies are more easily testable than others. The amount of reconvergent fan-out is a critical factor in determining realistic measures for determining test generation difficulty. Test implementation is usually left until after the VLSI data path has been synthesized into a structural description. This leads to investigation methodologies for performing design synthesis with test incorporation. These topics and more are discussed.




VLSI Design and Test


Book Description

This book constitutes the refereed proceedings of the 17th International Symposium on VLSI Design and Test, VDAT 2013, held in Jaipur, India, in July 2013. The 44 papers presented were carefully reviewed and selected from 162 submissions. The papers discuss the frontiers of design and test of VLSI components, circuits and systems. They are organized in topical sections on VLSI design, testing and verification, embedded systems, emerging technology.







Essentials of Electronic Testing for Digital, Memory and Mixed-Signal VLSI Circuits


Book Description

The modern electronic testing has a forty year history. Test professionals hold some fairly large conferences and numerous workshops, have a journal, and there are over one hundred books on testing. Still, a full course on testing is offered only at a few universities, mostly by professors who have a research interest in this area. Apparently, most professors would not have taken a course on electronic testing when they were students. Other than the computer engineering curriculum being too crowded, the major reason cited for the absence of a course on electronic testing is the lack of a suitable textbook. For VLSI the foundation was provided by semiconductor device techn- ogy, circuit design, and electronic testing. In a computer engineering curriculum, therefore, it is necessary that foundations should be taught before applications. The field of VLSI has expanded to systems-on-a-chip, which include digital, memory, and mixed-signalsubsystems. To our knowledge this is the first textbook to cover all three types of electronic circuits. We have written this textbook for an undergraduate “foundations” course on electronic testing. Obviously, it is too voluminous for a one-semester course and a teacher will have to select from the topics. We did not restrict such freedom because the selection may depend upon the individual expertise and interests. Besides, there is merit in having a larger book that will retain its usefulness for the owner even after the completion of the course. With equal tenacity, we address the needs of three other groups of readers.




Delay Fault Testing for VLSI Circuits


Book Description

In the early days of digital design, we were concerned with the logical correctness of circuits. We knew that if we slowed down the clock signal sufficiently, the circuit would function correctly. With improvements in the semiconductor process technology, our expectations on speed have soared. A frequently asked question in the last decade has been how fast can the clock run. This puts significant demands on timing analysis and delay testing. Fueled by the above events, a tremendous growth has occurred in the research on delay testing. Recent work includes fault models, algorithms for test generation and fault simulation, and methods for design and synthesis for testability. The authors of this book, Angela Krstic and Tim Cheng, have personally contributed to this research. Now they do an even greater service to the profession by collecting the work of a large number of researchers. In addition to expounding such a great deal of information, they have delivered it with utmost clarity. To further the reader's understanding many key concepts are illustrated by simple examples. The basic ideas of delay testing have reached a level of maturity that makes them suitable for practice. In that sense, this book is the best x DELAY FAULT TESTING FOR VLSI CIRCUITS available guide for an engineer designing or testing VLSI systems. Tech niques for path delay testing and for use of slower test equipment to test high-speed circuits are of particular interest.