Wastewater Treatment and Reuse in the Food Industry


Book Description

This Brief is devoted to clean drinking water, which is (one of) the most important asset(s) in the food and beverage industry. In the present time of increasing water scarcity in many areas of the world, supply of clean water especially in the production and packaging chain of foods and beverages, is a crucial issue. This Brief hence outlines why functioning purification and reuse systems for wastewater are becoming more and more interesting and promising technologies in solving the challenge. Readers find in this Brief an introduction to different innovative treatment methodologies. The authors discuss key parameters (such as the water volume to be treated, types and chemical and physico-chemical characteristics of pollutants, but also the intended use of the recycled water) and present various methodologies, such as separation or concentration systems, centrifugation, evaporation, filtration, flotation, gravity separation, membrane techniques, aerobic and anaerobic biological treatments, as well as combined or hybrid systems. Selected specific methods are presented in detail, specifically a new adsorption method for the removal of metal ions.




Handbook of Water and Energy Management in Food Processing


Book Description

Effective water and energy use in food processing is essential, not least for legislative compliance and cost reduction. This major volume reviews techniques for improvements in the efficiency of water and energy use as well as wastewater treatment in the food industry.Opening chapters provide an overview of key drivers for better management. Part two is concerned with assessing water and energy consumption and designing strategies for their reduction. These include auditing energy and water use, and modelling and optimisation tools for water minimisation. Part three reviews good housekeeping procedures, measurement and process control, and monitoring and intelligent support systems. Part four discusses methods to minimise energy consumption. Chapters focus on improvements in specific processes such as refrigeration, drying and heat recovery. Part five discusses water reuse and wastewater treatment in the food industry. Chapters cover water recycling, disinfection techniques, aerobic and anaerobic systems for treatment of wastewater. The final section concentrates on particular industry sectors including fresh meat and poultry, cereals, sugar, soft drinks, brewing and winemaking.With its distinguished editors and international team of contributors, Handbook of water and energy management in food processing is a standard reference for the food industry. - Provides an overview of key drivers for better management - Reviews techniques for improvements in efficiency of water and energy use and waste water treatment - Examines house keeping proceedures and measurement and process control




Waste Treatment in the Food Processing Industry


Book Description

Many standard industrial waste treatment texts sufficiently address a few major technologies for conventional in-plant environmental control strategies in the food industry. But none explore the complete range of technologies with a focus on new developments in innovative and alternative technology, design criteria, effluent standards, managerial d




Utilization of By-Products and Treatment of Waste in the Food Industry


Book Description

This is the third volume of the ISEKI-Food book series. It deals with the main features of utilization of the food industry waste, defined thereby as by-product, and the treatments necessary to discard waste to environmental acceptors. It discusses the utilization of byproducts of plants and fish, and presents case studies on waste treatment in the food industry.




Food Industry Wastes


Book Description

Food Industry Wastes: Assessment and Recuperation of Commodities presents emerging techniques and opportunities for the treatment of food wastes, the reduction of water footprint, and creating sustainable food systems. Written by a team of experts from around the world, this book provides a guide for implementing bioprocessing techniques. It also helps researchers develop new options for the recuperation of these wastes for community benefit. More than 34 million tons of food waste was generated in the United States in 2009, at a cost of approximately $43 billion. And while less than three percent of that waste was recovered and recycled, there is growing interest and development in recovering and recycling food waste. These processes have the potential not only to reduce greenhouse gases, but to provide energy and resources for other purposes. This book examines these topics in detail, starting with sources, characterization and composition of food wastes, and development of green production strategies. The book then turns to treatment techniques such as solid-state fermentation and anaerobic digestion of solid food waste for biogas and fertilizer. A deep section on innovative biocatalysts and bioreactors follows, encompassing hydrogen generation and thermophilic aerobic bioprocessing technologies. Rounding out the volume are extensive sections on water footprints, including electricity generation from microbial fuel cells (MFCs), and life cycle assessments. - Food waste is an area of focus for a wide range of related industries from food science to energy and engineering - Outlines the development of green product strategies - International authoring team represents the leading edge in research and development - Highlights leading trends of current research as well as future opportunities for reusing food waste




Food Industrial Processes


Book Description

The global food industry has the largest number of demanding and knowledgeable consumers: the world population of seven billion inhabitants, since every person eats! This population requires food products that fulfill the high quality standards established by the food industry organizations. Food shortages threaten human health and are aggravated by the disastrous, extreme climatic events such as floods, droughts, fires, storms connected to climate change, global warming and greenhouse gas emissions that modify the environment and, consequently, the production of foods in the agriculture and husbandry sectors. This collection of articles is a timely contribution to issues relating to the food industry. They were selected for use as a primer, an investigation guide and documentation based on modern, scientific and technical references. This volume is therefore appropriate for use by university researchers and practicing food developers and producers. The control of food processing and production is not only discussed in scientific terms; engineering, economic and financial aspects are also considered for the advantage of food industry managers.




Handbook of Waste Management and Co-Product Recovery in Food Processing


Book Description

The intensification of agriculture and food production in recent years has led to an increase in the production of food co-products and wastes. Their disposal by incineration or landfill is often expensive as well as environmentally sensitive. Methods to valorise unused co-products and improve the management of wastes that cannot be reused, as well as techniques to reduce the quantity of waste produced in the first place, are increasingly important to the food industry. With its distinguished editor and array of international contributors, Waste management and co-product recovery in food processing reviews the latest developments in this area and describes how they can be used to reduce waste.The first section of the book provides a concise introduction to the field with a particular focus on legislation and consumer interests, principle drivers of waste management. Part two addresses the minimisation of biowaste and the optimisation of water and energy use in food processing. The third section covers key technologies for co-product separation and recovery, such as supercritical fluid extraction and membrane filtration, as well as important issues to consider when recovering co-products, such as waste stabilisation and microbiological risk assessment. Part four offers specific examples of waste management and co-product exploitation in particular sectors such as the red meat, poultry, dairy, fish and fruit and vegetable industries. The final part of the book summarises advanced techniques, to dispose of waste products that cannot be reused, and reviews state of the art technologies for wastewater treatment.Waste management and co-product recovery in food processing is a vital reference to all those in the food processing industry concerned with waste minimisation, co-product valorisation and end waste management. - Looks at the optimisation of manufacturing procedures to decrease waste, energy and water use - Explores methods to valorise waste by co-product recovery - Considers best practice in different sectors of the food industry




The Interaction of Food Industry and Environment


Book Description

The Interaction of Food Industry and Environment addresses all levels of interaction, paying particular attention to avenues for responsible operational excellence in food production and processing. Written at a scientific level, this book explores many topics relating to the food industry and environment, including environmental management systems, environmental performance evaluation, the correlation between food industry, sustainable diets and environment, environmental regulation on the profitability of sustainable water use in the food industry, lifecycle assessment, green supply chain network design and sustainability, the valorization of food processing waste via biorefineries, food-energy-environment trilemma, wastewater treatment, and much more. Readers will also find valuable information on energy production from food processing waste, packaging and food sustainability, the concept of virtual water in the food industry, water reconditioning and reuse in the food industry, and control of odors in the food industry. This book is a welcomed resource for food scientists and technologists, environmentalists, food and environmental engineers and academics. - Addresses the interaction between the food industry and environment at all levels - Focuses on the past decade's advances in the field - Provides a guide to optimize the current food industry's performance - Serves as a resource for anyone dealing with food and environmental science and technology - Includes coverage of a variety of topics, including performance indicators, the correlation between the food industry, sustainable diets and the environment, environmental regulations, lifecycle assessments, green supply chain networks, and more




Waste Management for the Food Industries


Book Description

The continuously increasing human population, has resulted in a huge demand for processed and packaged foods. As a result of this demand, large amounts of water, air, electricity and fuel are consumed on a daily basis for food processing, transportation and preservation purposes. Although not one of the most heavily polluting, the food industry does contribute to the increase in volume of waste produced as well as to the energy expended to do so. For the first time, nine separate food industry categories are thoroughly investigated in Waste Management for the Food Industries in an effort to help combat this already acute problem. The current state of environmental management systems is described, offering comparisons of global legislation rarely found in other resources. An extensive review of commercial equipment, including advantages and disadvantages per employed waste management technique, offers a unique perspective for any academic, student, professional, and/or consultant in the food, agriculture and environmental industries. - Thoroughly examines the most prevalent and most polluting industries such as Meat, Fish, Dairy, Olive Oil, Juice and Wine industries - Includes synoptical tables [methods employed, physicochemical or microbiological parameters altered after treatment etc] and comparative figures of the effectiveness of various waste management methods - Contains nearly 2500 of the most up-to-date references available




Pollution Control Technologies


Book Description

p="" This monograph is based on pollution control technologies available to deal with water and air pollution. It includes removal of variety of pollutants including arsenic, chromium, uranium, pesticides and arsenic from water using adsorption technique. In addition, this book deals with the sampling and removal of microplastics using various techniques. The contents also focus on the role of membrane technology in water and wastewater treatment, and particulate matter air pollution and its control techniques. This volume will be a useful guide for researchers, academics and scientists. ^