Results of Tests for Tensile Strength, Etc., of Crucible Basic, and Galvanized Basic Steel Wire Ropes, and Basic Steel Wire Rods (Classic Reprint)


Book Description

Excerpt from Results of Tests for Tensile Strength, Etc., Of Crucible Basic, and Galvanized Basic Steel Wire Ropes, and Basic Steel Wire Rods Table 1 contains tests made of wires drawn from a number (i soft Basic wire rod, gauge after gauge in succession down to and including number 16, and annealed after each drawing. Table 2 contains the tests of wires drawn from the same rod number 6, as before, but which were not annealed after each draw ing. The annexed diagram gives a graphic representation of the results of 92 tests, made upon rods which were drawn from a number 8 soft Basic wire rod. The wire was successively subjected to an increasing load, and the extension measured. All the samples sent for testing were from the ordering stock as manufactured by the company, and pains were taken to send only average pieces, none of which had been especially prepared for test ing except the number 6 Basic steel wire rods, thomas-gilchrist process, which had been drawn, as stated, as far as it was safe to draw one gauge in size at a time. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.










Results of Tests


Book Description




Bulletin


Book Description







Strength and Other Properties of Wire Rope


Book Description

It is the purpose of this paper to give the results of tests of about 300 cables selected under the specifications of the Isthmian Canal Commission. The specimens were submitted primarily for the purpose of fulfilling acceptance tests up material used at the Canal Zone. The tensile strength of the specimens was the important consideration, but the major portion of the investigation has been of a purely supplementary character to determine the laws of behavior of the cables in connection with their important physical characteristics.




Steel Wire Ropes. Test Method. Determination of Measured Breaking Force


Book Description

Testing, Library and information science, Wires, Bearing strength, Ropes, Definitions, Inspection, Tensile strength, Steels, Properties, Vocabulary, Terminology, Specifications, Panels




Steel Wire Ropes. Safety. General Requirements


Book Description

Steel-wire ropes, Ropes, Wire ropes, Wires, Safety measures, Equipment safety, Mechanical testing, Tensile testing, Type testing




Wire Technology


Book Description

Wire Technology: Process Engineering and Metallurgy, Second Edition, covers new developments in high-speed equipment and the drawing of ultra-high strength steels, along with new computer-based design and analysis software and techniques, including Finite Element Analysis. In addition, the author shares his design and risk prediction calculations, as well as several new case studies. New and extended sections cover measurement and instrumentation, die temperature and cooling, multiwire drawing, and high strength steel wire. Coverage of process economics has been greatly enhanced, including an exploration of product yields and cost analysis, as has the coverage of sustainability aspects such as energy use and recycling. As with the first edition, questions and problems are included at the end of each chapter to reinforce key concepts. Written by an internationally-recognized specialist in wire drawing with extensive academic and industry experience Provides real-world examples, problems, and case studies that allow engineers to easily apply the theory to their workplace, thus improving productivity and process efficiency Covers both ferrous and non-ferrous metals in one volume