The Three Dimensional Flow Field at the Exit of an Axial-Flow Turbine Rotor


Book Description

A systematic and comprehensive investigation was performed to provide detailed data on the three dimensional viscous flow phenomena downstream of a modem turbine rotor and to understand the flow physics such as origin, nature, development of wakes, secondary flow, and leakage flow. The experiment was carried out in the Axial Flow Turbine Research Facility (AFTRF) at Penn State, with velocity measurements taken with a 3-D LDV System. Two radial traverses at 1% and 10% of chord downstream of the rotor have been performed to identify the three-dimensional flow features at the exit of the rotor blade row. Sufficient spatial resolution was maintained to resolve blade wake, secondary flow, and tip leakage flow. The wake deficit is found to be substantial, especially at 1% of chord downstream of the rotor. At this location, negative axial velocity occurs near the tip, suggesting flow separation in the tip clearance region. Turbulence intensities peak in the wake region, and cross- correlations are mainly associated with the velocity gradient of the wake deficit. The radial velocities, both in the wake and in the endwall region, are found to be substantial. Two counter-rotating secondary flows are identified in the blade passage, with one occupying the half span close to the casino and the other occupying the half span close to the hub. The tip leakage flow is well restricted to 10% immersion from the blade tip. There are strong vorticity distributions associated with these secondary flows and tip leakage flow. The passage averaged data are in good agreement with design values. Lakshminarayana, B. and Ristic, D. and Chu, S. Glenn Research Center AXIAL FLOW TURBINES; BLADE TIPS; BOUNDARY LAYER SEPARATION; FLUID DYNAMICS; SPATIAL RESOLUTION; THREE DIMENSIONAL FLOW; VISCOUS FLOW; VORTICITY; WAKES; COUNTER ROTATION; FLOW DISTRIBUTION; RADIAL VELOCITY; SECONDARY FLOW; SEPARATED FLOW; TURBINES; VELOCITY DISTRIBUTION; VELOCITY MEASUREMENT...



















Axial Flow Turbines


Book Description




Three-dimensional Flow in an Axial Turbine


Book Description

This paper presents an exhaustive experimental documentation of the three-dimensional nature of the flow in a one-and-one-half stage axial turbine. The intent was to examine the flow within, and downstream of, both the stator and rotor airfoil rows so as to delineate the dominant physical mechanisms. Part 1 of this paper presented the aerodynamic results. Part 2 presents documentation of the mixing, or attenuation, of a simulated spanwise inlet temperature profile as it passed through the turbine, including: (1) the simulated combustor exit-turbine inlet temperature profile, (2) surface measurements on the airfoils and endwalls of the three airfoil rows, and (3) radial-circumferential distributions downstream of each airfoil. Although all three rows contributed to profile attenuation, the impact of the rotor was strongest.