Masters Theses in the Pure and Applied Sciences


Book Description

Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.




Vortex Breakdown and Control Experiments in the Ames-Dryden Water Tunnel


Book Description

Flow-field measurements have been made to determine the effects of core blowing on vortex breakdown and control. The results of these proof-of-concept experiments clearly demonstrate the usefulness of water tunnels as test platforms for advanced flow-field simulation and measurement.




Water Tunnel Measurements of Unsteady Separation


Book Description

The results of experiments in which a controlled region of flow separation was generated downstream of an oscillating fence-type spoiler located on one surface of an airfoil are discussed. The experiments were conducted in a low speed water tunnel under incompressible flow conditions over a wide range dimensionless frequencies and Reynolds numbers. High speed motion pictures and still photographs of hydrogen bubbles formed at surface mounted electrodes were used to obtain data regarding the shape and growth characteristics of the separation zone. Under certain conditions an energetic vortex-like structure was observed to form behind the spoiler and evolve in a manner determined by the Reynolds number and dimensionless frequency parameters. Observations of flow development reveal that the global structure of the separated region during the formation process is qualitatively similar to the one encountered in classical dynamic stall. (Author).










Boundary Layer and Flow Control


Book Description

Boundary Layer and Flow Control: Its Principles and Application, Volume 2 focuses on the layer of fluid in the immediate area of a bounding surface where the effects of viscosity are substantial. This book is organized into two main topics—boundary layer control for low drag, and shock-induced separation and its prevention by design and boundary layer control. It specifically discusses the nature of transition, effect of two-dimensional and isolated roughness on laminar flow, and progress in the design of low drag aerofoils. The onset of separation effects for aerofoils and wings, shock-induced separation for laminar boundary layers, and shock-induced separation for laminar boundary layers are also deliberated. This volume is recommended to physicists and specialists interested in boundary layer and flow control.




Swirling Flow Problems at Intakes


Book Description

Fundamentals of vortex intake flow; Results theoretical & experimental work; Prediction of critical submergence; Modeling of vortices & swirling flows; Design; Intake structures; Pump sumps; Vortex-flow intakes. This volume forms an essential reference work for anyone involved in intakes, either as a practising design engineer or research worker. Water Power & Dam Constr., July 1988.The book is essential reading for postgraduate students & researchers alike and a very valuable aid to design engineers. Hydrol.Sc.Jrl., 33(3), 1988.




Masters Theses in the Pure and Applied Sciences


Book Description

Volume 37 (thesis year 1992) reports a total of 12,549 thesis titles from 25 Canadian and 153 US universities (theses submitted in previous years but only now reported are indicated by the thesis year shown in parenthesis). The organization, like that of past years, consists of thesis titles arrange